Sony Bdv It1000 Operating Instructions

51GB
Getting Started
7Reattach the rear cap using the wrench (supplied).
8Secure the speaker to the bracket with the screw in Step 3 using hole 4.
4
 

52GB
Getting Started
Step 3: Connecting the System
See the connection diagram below, and read the additional information from 1 to 8 on the following 
pages.
Note Be sure to make connections securely to avoid hum and noise.
 When you connect another component with a volume control, turn up the volume of the other components to a level 
where sound is not distorted.
BDV-IT1000
HDMI S-AIR
4 AM loop antenna (aerial)
1 Subwoofer8 AC power cord (mains lead) 4 FM wire antenna (aerial) 2 TV
1 Front left speaker...

53GB
Getting Started
BDV-IS1000
HDMI S-AIR
4 AM loop antenna (aerial)
1 Subwoofer8 AC power cord (mains lead) 4 FM wire antenna (aerial) 2 TV
1 Front left speaker (L)
1 Center speaker
1 Front right speaker (R)
1 Surround left speaker (L)1 Surround right speaker (R)
:Signal flow 3 DIGITAL MEDIA 
PORT adapter3 Set-top box/digital satellite 
receiver, VCR, or PlayStation, 
etc.
5 Wireless 
transceiver
8 AC power cord 
(mains lead) Surround amplifier5 Wireless 
transceiver 7 Network6 External 
memory
 

54GB
Getting Started
Front/center speakers and subwoofer for BDV-IT1000
When connecting speaker cords to the unit, insert the connector until it clicks.
When connecting the speaker cords to the subwoofer, use the speaker cords (purple). Be sure to match 
the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 
3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation in the 
speaker terminals.
1 Connecting the Speakers...

55GB
Getting Started
Front/center speakers and subwoofer for BDV-IS1000
When connecting to the unit, insert the connector until it clicks.
The speaker cords (yellow and purple) are connected to the subwoofer beforehand as follows. When 
re-connecting, be sure to match the speaker cords to the appropriate terminals on the speakers: the 
speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch 
the speaker cord insulation in the speaker terminals.
COAXIAL...

56GB
Getting Started
Surround speakers
About the speaker cords of the front/center speakers and subwoofer
You can remove the speaker cords from the connector. With the catch facing down, press and hold the 
connector down against a flat surface (1) and remove the speaker cords from the connector (2).
When attaching the speaker cords to the connector, be sure to match the polarity of the speaker cords 
and the connector.
Note Short-circuiting of the speakers may damage the system. To prevent this, make...

57GB
Getting Started
Use the parts as follows:

To listen to TV sound from the six speakers of the system, connect the TV and the system with the 
audio cord (not supplied) (A).
For video output to your TV, check the video input jacks of the TV, and select connection method A, 
B, C, or D. Picture quality improves in order from A (standard) to D (HDMI).
When the TV has the digital optical output jack, you can improve sound quality by connecting with the 
digital optical cord (not supplied) (B).
* If your...

58GB
Getting Started
About the HDMI connection
If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.
If you connect a Sony TV that is compatible with the Control for HDMI function (page 105), operation 
is simplified (ex. ONE-TOUCH PLAY: With one touch of the button, the connected TV turns on and 
the input selector on the TV is switched to the system automatically). For details, see “Using the 
Control for HDMI Function for “BRAVIA” Sync” (page 105).
Note Be sure to use only an...

59GB
Getting Started
You can enjoy the connected component(s) using the six speakers of the system.
 Set-top box/digital satellite receiver, VCR, or PlayStation, etc. (without HDMI OUT jack): 1
 Set-top box/digital satellite receiver or PLAYSTATION
®3, etc. (with HDMI OUT jack): 2 
 DIGITAL MEDIA PORT adapter: 3
3 Connecting the other components
COAXIAL OPTICAL
COAXIAL 75FM
AMANTENNA DIGITALHDMI
DMPORTEZW-RT10
TV
SAT/CABLE IN VIDEO OUT IR REMOTE
LAN(100)
EXTERNAL
SPEAKER SAT/CABLE
COMPONENT VIDEO OUT...

60GB
Getting Started
Connection 1 (SAT/CABLE jacks)
You need to make both video and audio connections.
For video connection, check the video output jacks of the component, and select a connection method. 
B (component) offers the better picture quality than A (standard).
For audio connection, connect the audio cords (A). If the component has a digital optical or coaxial 
output jack, you can improve sound quality by connecting with the digital cord (B).
Note The system can accept both digital and analog...