Sony Bdv It1000 Operating Instructions

61GB
Getting Started
Relationship between input and output video signal
The relationship between input and output video signal for each function is as follows.
a: Video signals are output.
–: Video signals are not output.
* Depending on the setting of the video output resolution, video signals may be not output. For details, see “Video 
Output Resolution” (page 144).
Relationship between input and output audio signal
The relationship between input and output audio signal for each function is as follows....

62GB
Getting Started
Note Keep the AM loop antenna (aerial) and cord away from the system or other AV components, as noise may result.
 Be sure to fully extend the FM wire antenna (aerial).
 After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Tip Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
 If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM 
antenna (aerial) as shown below.
4...

63GB
Getting Started
You can transmit sound from the unit to an S-AIR product, such as a surround amplifier or S-AIR 
receiver.
An S-AIR product is a component that is compatible with the S-AIR function.
To use the S-AIR function, you need to insert the wireless transceivers into the unit, surround amplifier, 
and S-AIR receiver.
For details of the S-AIR function, see “Using an S-AIR Product” (page 99).
Note When you insert the wireless transceiver, make sure that the AC power cord (mains lead) is not...

64GB
Getting Started
Insert the external memory (local storage) (not supplied: USM1GH (as of April 2008)) into the 
EXTERNAL slot. By connecting an external memory, you can enjoy additional contents (BonusView/
BD-Live) depending on the disc.
Note Insert the external memory in the V direction into the EXTERNAL slot as far as it will go.
 Check that “EXT” lights up in the front panel display when turning the system on.
To enjoy BonusView/BD-Live
See “Enjoying BonusView/BD-Live” (page 78).
To remove the...

65GB
Getting Started
Connect the LAN (100) terminal of the unit to your Internet source using a network cable to update the 
system’s software using the network. You can also enjoy BD-Live (page 78).
Make the appropriate settings in [Internet Settings] under [Network Settings] (page 127).
To update the system’s software using the network
See [Network Update] (page 118) and [Software Update Notification] (page 126).
To enjoy BD-Live
See “Enjoying BonusView/BD-Live” (page 78).
Note Do not connect a phone...

66GB
Getting Started
 To enjoy the BD-Live function, we recommend using an Internet connection with an effective speed of 1 Mbps or 
greater, depending on your connection environment and network condition.
Before connecting the AC power cords (mains leads) of the unit and the surround amplifier to a wall 
outlet (mains), connect the front, center speakers and subwoofer to the unit and surround speakers to 
the surround amplifier.
8 Connecting the AC power cords (mains leads)
RSURROUND SELECTOR
S-AIR ID...

67GB
Getting StartedStep 4: Setting up the 
Wireless System
To use the wireless system, you need to set up 
the surround amplifier. Before setting, make 
sure that the wireless transceivers are inserted 
into the unit and the surround amplifier correctly 
(page 63).
This wireless system is called “S-AIR.” For 
details of the S-AIR function, see “Using an 
S-AIR Product” (page 99).
The unit transmits sound to the surround 
amplifier that is connected to the surround 
speakers. To establish sound...

68GB
Getting Started
To prevent transmission from 
your neighbors
To prevent the transmission from neighbors, you 
can identify the unit and the surround amplifier 
by performing the pairing operation. For details, 
see “Identifying the unit with a specific S-AIR 
sub unit (Pairing operation)” (page 102).
To use the surround amplifier for 
the surround back speakers
You can enjoy 7.1 surround sound with the 
surround back speakers by purchasing the 
additional surround amplifier.
To use the surround...

69GB
Getting StartedStep 5: Performing the 
Easy Setup
Follow the Steps below to make the basic 
adjustments for using the system.
Displayed items vary depending on the country 
model.
1Turn on the TV.
2Press [/1 on the unit, and POWER on 
the surround amplifier.
3Switch the input selector on your TV so 
that the signal from the system 
appears on the TV screen.
The Easy Setup Display for OSD language 
selection appears.
If the Easy Setup Display does not 
appear
Recall the Easy Setup Display. See “To...

70GB
Getting Started
Note When you do not connect the unit and TV with 
the HDMI cable, you cannot select [HDMI].
 When connecting the HDMI OUT jack and 
other video output jacks at the same time, select 
[Component Video].
 For details about video output resolution, see 
“Video Output Resolution” (page 144).
8Press  or c.
The Setup Display for video output 
resolution selection appears. For details, see 
[Output Video Format] (page 120).
When you select [HDMI] in Step 7
Select from [Auto], [480i/576i],...