Sony Bdv It1000 Operating Instructions

External Audio Device
101GB
You can enjoy the system’s sound by using the 
S-AIR receiver. The S-AIR receiver can be 
installed anywhere, regardless of the location of 
the unit, for enjoying the system’s sound in 
another room.
For details of the S-AIR receiver, refer to the 
operating instructions of the S-AIR receiver.
1Set the ID of the S-AIR receiver to that 
of the main unit.
 To set the ID of the unit, see “To set the ID 
of the unit” (page 99).
 To set the ID of the S-AIR receiver, refer 
to the...

102GB
You can enjoy the S-AIR receiver while the unit 
is in standby mode by setting [S-AIR Standby] 
to [On].
1Press "/1.
The system turns on.
2Press HOME.
The home menu appears on the TV screen.
3Press C/c to select   [Setup].
4Press X/x to select [System Settings], 
then press  .
5Press X/x to select [S-AIR Standby], 
then press  .
6Press X/x to select the desired setting.
 [On]: You can enjoy the S-AIR receiver 
while the unit is in standby mode or turned 
on.

: You cannot enjoy the S-AIR...

External Audio Device
103GB
xAfter pairing
Sound transmission is established between the 
paired unit and S-AIR sub unit(s) only.
To perform pairing
1Place the S-AIR sub unit that you want 
to pair near the unit.
Note Remove headphones from the surround 
amplifier (if connected).
2Match the IDs of the unit and the S-AIR 
sub unit.
 To set the ID of the unit, see “To set the ID 
of the unit” (page 99).
 To set the ID of the surround amplifier, 
see “To set the ID of the surround 
amplifier” (page 100)....

104GB
To cancel pairing
Perform the ID setting of the unit according to 
the procedure of “To set the ID of the unit” 
(page 99). If you select a new ID (you can select 
the same ID as before), pairing is canceled.
If you use multiple wireless systems which 
sharing the 2.4 GHz band, such as wireless LAN 
or Bluetooth, the transmission of S-AIR 
products or other wireless systems may be 
unstable. In this case, the transmission may be 
improved by changing the following [S-AIR RF 
Change] setting.
1Press...

Other Operations
105GB
Using the Control for 
HDMI Function for 
“BRAVIA” Sync
This function is available on TVs with the 
“BRAVIA” Sync function only.
By connecting Sony components that are 
compatible with the Control for HDMI function 
with an HDMI cable (not supplied), operation is 
simplified as below:
– Theatre Mode (page 106)
– One-Touch Play (page 106)
– System Power Off (page 107)
– Volume Limit (page 107)
– System Audio Control (page 107)
– Language Follow (page 107)
Control for HDMI is a...

106GB
Note For details on setting the TV and the connected 
components, refer to their operating 
instructions.
If “SCANNING” or “COMPLETE” 
does not appear after performing 
in Control for HDMI – Easy Setting
Set the Control for HDMI function to on for the 
system and the connected components 
individually.
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select   [Setup].
3Press X/x to select [HDMI Settings], 
then press  .
The options for [HDMI Settings] appear.
4Press X/x to select...

Other Operations
107GB
(System Power Off)
When you turn the TV off by using the POWER 
button on the TV’s remote or AV "/1 on the 
system’s remote, the system turns off 
automatically.
Note Before using the System Power Off function, set the 
function for TV power. For details, refer to the 
operating instructions of the TV.
 Depending on the status, the system or the connected 
components may not turn off automatically. For 
details, see the operating instructions supplied with 
the connected...

108GB
Calibrating the 
Appropriate Settings 
Automatically
[Auto Calibration]
D. C. A. C. (Digital Cinema Auto Calibration) 
can set the appropriate surround sound 
automatically.
Note The system outputs a loud test sound when [Auto 
Calibration] starts. You cannot turn the volume 
down. Give consideration to children and neighbors.
 Make sure that the headphones are not connected to 
the surround amplifier. You cannot operate the 
following Steps with the headphones connected.
1Press HOME.
The home menu...

Other Operations
109GB
7Press .
[Auto Calibration] starts.
The system adjust the speaker setting 
automatically.
Be quiet during the measurement.
Note Before [Auto Calibration], make sure that the 
surround amplifier turns on and you install the 
surround amplifier in the appropriate location. If 
you install the surround amplifier in an improper 
location, such as another room, proper 
measurement will not be obtained.
 When you use the additional surround amplifier 
for the surround back speakers...

110GB
Setting the Speakers
[Speaker Settings]
To obtain the best possible surround sound, set 
connection of the speakers and their distance 
from your listening position. Then use the test 
tone to adjust the level and the balance of the 
speakers to the same level.
Note You cannot operate [Speaker Settings] when you 
connect headphones to the surround amplifier.
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select   [Setup].
3Press X/x to select [Audio Settings], 
then press  ....