Sony Bdv It1000 Operating Instructions

31GB
Getting Started1Unscrew the short screws from the bottom of the floor base and detach the desktop 
stand from the floor base.
Note Set aside the removed screws so that you do not lose them.
2Thread the speaker cord through the hole in the bottom of the desktop stand.
Assembling the front and surround speakers with the desktop stands
,
Desktop stand
Floor base Short screwsBottom of the floor base
Speaker cordBottom of the desktop stand
 

32GB
Getting Started
3Remove the screw from the speaker.
The removed screw is used when attaching the desktop stand. Be sure not to lose the screw.
Note When assembling, take care not to touch the speaker unit.
Front speaker
Surround speaker Screw
 

33GB
Getting Started
4Connect the speaker cords to the speaker.
The connector and color tube of the speaker cords are the same color as the label of the jacks to be 
connected.
Use the speaker cords as follows:
 Front left speaker (L): White
 Front right speaker (R): Red
 Surround left speaker (L): Blue
 Surround right speaker (R): Gray
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord 
with the color tube to 3, and the speaker cord without the color tube...

34GB
Getting Started
5Attach the speaker to the desktop stand.
When attaching, match the orientation of the desktop stand and speaker.
Secure the speaker with the screw removed in Step 3.
Note When assembling, take care not to touch the speaker unit.
6Take up the slack in the speaker cord by pulling from the bottom of the desktop stand 
and secure the speaker cord by running it through the slot.
Note When assembling, take care not to touch the speaker unit.
,
Ex. Front speaker
Screw Adjust the length of...

35GB
Getting Started
7Attach the baffle cover to the speaker.
Use the baffle cover (short) for the front speaker, baffle cover (long) for the surround speaker.
Press the ends of the baffle cover over the pin(s), then press down to flush fit the speaker front.
Note When assembling, take care not to touch the speaker unit.
8Attach the grille to the speaker.
Be careful with the orientation of the grille. The SONY logo should be at the bottom of the grille.
Note When assembling, take care not to touch the...

36GB
Getting Started
Fully-assembled illustration with the desktop stands
Note When moving the front or surround speaker, hold the desktop stand part (1), not the speaker part (2).
Surround left speaker (L): 
Blue label
White RedSurround right speaker (R):Gray label Front left speaker (L): 
White labelFront right speaker (R): 
Red label
Blue Gray
GreenCenter speaker: Green label
Ex. Front speaker
 

37GB
Getting StartedStep 2: Positioning the System
For the best possible surround sound, all the speakers other than the subwoofer should be placed at the 
same distance from the listening position (A).
Place the system as illustrated below.
BDV-IT1000
BDV-IS1000
A
GB
C
DE
F
AAA
A
A
H
I
J
K
AA
A Front left speaker (L)
B Front right speaker (R)
C Center speaker
D Surround left speaker (L)
E Surround right speaker (R)
F Subwoofer
G Unit
H Surround amplifier
For surround back speakers 
(optional)
I Surround...

38GB
Getting Started
About the surround back speaker
You can enjoy 7.1 surround sound with the surround back speakers by purchasing the additional 
surround amplifier (optional). Use the commercially available speakers for the surround back speakers.
To use the surround amplifier for the surround back speakers, connect the surround back speakers (not 
supplied) to the surround amplifier, see “Using an S-AIR Product” (page 99). 
Note Avoid placing obstructions around the speaker.
 After installing the...

39GB
Getting Started
To reinforce the bass sound, place the subwoofer as close as possible to a wall.
Note If the subwoofer is to be placed ahead of the front speaker, the distance should be less than 0.5 m (1.6 ft).*
 You may not get the bass sound efficiently when the subwoofer is placed outside (3). You need to adjust the setting 
of the distance from the listening position.
Using the subwoofer efficiently
Close to a wall
*
3 3
 

40GB
Getting Started
 Do not place objects on the top of the subwoofer where the speaker unit is installed.
 Do not place the subwoofer under a desk or in a cabinet, etc.
 Do not place the subwoofer behind an obstruction, such as a TV, etc. Middle range sound will fall.
TV etc.