Singer Serger Professional 5 Manual
Here you can view all the pages of manual Singer Serger Professional 5 Manual. The Singer manuals for Sewing Machine are available online for free. You can easily download all the documents as PDF.
Page 271
4. Turn the hand wheel toward you until the Chainstitch Looper extends out 10mm (approximately ½ inch) from the needle plate edge. 5. Thread the looper area of the ma chine following the brown color-coded thread guides 4-11. Us e the tweezers provided in the accessory case to aid in threading the looper. 6. Place the thread through threading guide f and g. 7. Continue threading...
Page 273
5. Continue to thread point s 4-8. Slip the thread into the middle slot of the thread guide g. Go over the take up lever h. Continue by slipping the thread into the middle slot of the thread guides i and j. 6. Before threading the eye of the needle, make sure the thread is in front of the thread guide located on the bottom of the needle clamp. 7. Thread the eye of the Ri ght Cover...
Page 275
5. Continue to thread point s 4-8. Slip the thread into the front slot of the thread guide g. Go over the take up lever h. Continue by slipping the thread into the left sl ots of the thread guides i and j. 6. Before threading the eye of the needle, make sure the thread is in front of the thread guide located on the bottom of the needle clamp. 7. Thread the eye of the Left Cover Stitch Needle k....
Page 278
Triple Cover Hem This innovative stitch provides a very wi de 5.6 mm professional and creative triple topstitch to sewing projects . Three needles create parallel rows of topstitching and one looper sews an edge finish on the under neath side. This is ideal for heavier fabrics traditionally used in home decorating. It also adds a unique accent for garment construction. In addition to sewing on woven fabrics, the Triple Cover Hem makes a beautiful topstitch and a strong hem on st...
Page 279
ATD: Auto Tension Dial “J” Left Cover Stitch Needle “C” (Orange) Threaded Middle Cover Stitch Nee- dle “D” (Blue) Threaded Right Cover Stitch Needle “E” (Green) Threaded Upper Looper Looper Disengaged and Not Threaded Lower Looper Not Threaded Chain Stitch Looper (Brown) Threaded Upper Looper Clutch “C” Upper Knife Non-working Position Seam Guide Plate Installed Seam Width Dial “N” Stitch Length Dial “N”...