Singer Serger Professional 5 Manual
Here you can view all the pages of manual Singer Serger Professional 5 Manual. The Singer manuals for Sewing Machine are available online for free. You can easily download all the documents as PDF.
Page 291
Page 292
Chapter 14:
Three-Thread Rolled Hem
Page 293
Three-Thread Rolled Hem The Rolled Hem Stitch is used to finish edges of scarves, ruffles, table linens, and some garments. It is suitable for lightweight to medium weight fabrics, such as sheers, silkies and broadcloth. Beautiful pintucks c an be achieved with the rolled hem. They can enhance a yoke, heirloom sewing, wearable art and even home decorating projects. Note: Rolled hemming can onl y be performed with the Right Overedge needle all other needles must be removed....
Page 294
ATD:
Auto Tension Dial
“C”
Left Cover Stitch
Needle “C” Not Threaded
Middle Cover Stitch
Needle “D” Not Threaded
Right Cover Stitch
Needle “E” Not Threaded
Upper Looper
(Green) Looper Engaged
and Threaded
Lower Looper
(Red) Threaded
Chain Stitch Looper
(Brown) Not Threaded
Upper Looper Clutch “L”
Upper Knife Engaged
Seam Guide Plate Not Installed
Use Knife Cover
Seam Width Dial “N”
Stitch Length Dial...
Page 295
Three-Thread Rolled Hem Page 3
Page 296
Page 297
Page 298
Three-Thread Rolled Hem Page 6
Page 299
3. Thread the top cover thread guide by pulling the thread towards the left until
it slips under the guide. Then pu ll the thread along the right side of the
button as illustrated.
4. While holding the thread firmly, pull the thread between the tension disks.
5. Turn the handwheel toward you unt il the lower looper extends 5-10mm
(approximately ½ inch ) from the needle plate edge.
6. Thread the looper area of the ma...
Page 300
7. Thread the hole in the Upper Looper from front to back k. Pull about 4
inches of thread through the loope r and place to the back of the
throat plate.