Siemens Saturn Iie Epabx General Description Manual

I I 
- 
SATURN IIE EPABX 
Installation Procedures A30808-X5130-BllO-l-8928 
Issue 1, May 1986 
P5Lliu15-320186 Figure 4.38 PSC PCB 
4-62  

I 
- 
SATURN IIE EPABX A30808-X5130-8110-l-8928 
Installation Procedures Issue 1, May 1986 
Table 4.24 Signal Multiplexer/Clock/Tone Generator (SMXTG) PCS (S30810-Ql791-X- * -8900) 1 
DESCRIPTION:  DESCRIPTION: The SMXTG PCB, shown in Figure 4.39, is divided into three functional parts: the signal multiplexer, 
the clock generator, and the tone generator. 
. .  . . 
OBSERVATIONS:  OBSERVATIONS: 
INSTALLATION  INSTALLATION 
PROCEDURES:  PROCEDURES: The SMXlG is a hardwarecontrolled scanner/distributor...

SATURN IIE EPABX 
Installation Procedures A30808-X5130-BllO-l-8928 
Issue 1, May 1986 “-. “L_cl~ 
Figure 4.39 SMXTG PCB 
4-64  

SATURN IIE EPABX A30608-X5130-6110.l-8928 
Installation Procedures Issue 1, May 1986 
DESCRIPTION: Table 4.25 Conference (CONF) PCB (S30810.Q417-X- + -B900) 
The CONF PCB, shown in Figure 4.40, makes all connections involving three to eight ports. The PCB 
provides four, &port and twenty-four 24, Cport conference circuits. A maximum of two conference PCBs, 
CONFO and CONFI, can be allocated in a LTU shelf. CONFO PCB is standard with the system, CONFl 
is optional. 
1. Indicators. None. 
O@SERVATIONS:...

I I 
- 
SATURN iIE EPABX 
Installation Procedures 
P5on-z-m6 Figure 4.40 CONF PCB A30808-X5130-BllO-l-8928 
Issue 1, May 1986 
4-66  

SATURN HE EPABX 
A30808-X5130-BllO-l-8928 
Installation Procedures Issue 1, May 1986 
, I 
Table 4.26 Memory Control and Attenuation (MCA) PCB (S30810-Q416X*-8900) 
DESCRIPTION: The MCA PCB, shown in Figure 4.41, is divided into two functional parts: a Time Switch Unit (TSU) 
and a controller. The TSU makes all port connections and provides attenuation for all calls being processed 
in the system. The controller receives control data from the main central processor and causes the TSU 
and conference...

I 
SATURN HE EPABX 
Installation Procedures A30808-X5130-BllO-l-B928 
Issue 1. May 1986 
Figure 4.41 MCA PCB 
4-68  

I 
- I 
- 
SATURN IIE EPABX A30808-X5130-BllO-l-6928 
Installation Procedures Issue 1, May 1986 
IESCRIPTION: 
. Table 4.27 Remote Access Unit/Ports (RAUP) PCB (S30810-Q1792X * -8900) 
The RAUP PCB, shown in Figure 4.42, contains a built in modem and interfaces with the CIOP MCA 
and MEM for the transfer of data to and from terminals and the modem port. It supports three serial 
ports which can be connected to any device tha! supports serial communication. Two of the ports are 
RS232 type for TTY0 and...

I 
- 
SATURN IIE EPABX A30808-X5130-8110-1-8928 
Installation Procedures Issue 1, May 1986 
Figure 4.42 RAUP PCB  

I 
- 
SATURN IIE EPABX 
A30808-X5130-BllO-l-8928 
installation Procedures 
Issue 1, May 1986 
Table 4.28 Controller/Input-Output Processor (CIOP) PCB (S30810-Q1789X 
l -8900) 
DESCRIPTION: The CIOP PCB, shown in Figure 4.43, contains the main central processor, which processes incoming 
data from the peripheral devices via the SMXTG, makes decisions based on the data received 
using instructions stored in memory and, as a result of these decisions, issues commands for call processing. 
The Signal Input...