Home > Siemens > Communications System > Siemens Saturn Iie Epabx General Description Manual

Siemens Saturn Iie Epabx General Description Manual

Here you can view all the pages of manual Siemens Saturn Iie Epabx General Description Manual. The Siemens manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 141

SATURN IIE EPABX 
Installation Procedures 
4.03 LTU Shelf. The LTU shelf can be installed in the basic 
and expansion equipment cabinets. The LTU shelf is unpack- 
aged as shown in Figure 4.07. Refer to Table 4.02 for further 
information on the LTU shelf. A30808-X5130-8110-l-8928 
Issue 1, May 1986 
8230743-185 
4-12 
Figure 4.07 LTU Shelf Unpackagmg Memoa  

Page 142

I 
-- 
SATURN IIE EPABX A30808-X5130-8110-l-8928 
Installation Procedures Issue 1, May 1986 
Table 4.02 Line/Trunk Unit Shelf 
EQUIPMENT Card SLOT 
PART NO. 
LTU Shelf Assembly 
S30804-B5197-X7- * -8900 
LTU Power Supply V30141-ZO113-Al.5 * -8900 
Dual-Tone Multifrequency (DTMF) Receiver PCB O-517-18,20-25 S30810-Q431-X2- * -8900 
Premium Instrument Module Digital (PIMD) PCB O-5,7-18,20-25 S30810-Q432-X- * -8900 
Subscriber Line Module Analog - Station (SLMA-S) PCB 
O-5,7-18,20-25 S30810-Q1674-X- * -8900...

Page 143

SATURN IIE EPABX A30808-X5130-BllO-l-8918 
Installation Procedure 
Issue 1, May 1986 
P5070-26-3/20/66 Figure 4.08 LTU Shelf (Front View With PCBs) 
P5070.24.3/20/66 Figure 4.09 LTU Shell (Rear View) 
4-14  

Page 144

I 
- 
SATURN IIE EPABX 
A30808-X5130-BllO-l-8928 
installation Procedures 
Issue 1, May 1986 
‘SCWS 
Typ. 6 Places 
Note: These screws should first be removed from the 
backplane, then the shelf should be installed by 
remserling the straws through the busbar tabs. 
From 
(Side View) 
Figure 4.10 LTU Shelf Connectors (Rear View) 
4-15  

Page 145

6 
- 
SATURN HE EPABX 
installation Procedures A30808-X5130-8110-l-8928 
Issue 1, May 1986 
Side 
Mounting 
Flanges 
I 
Screws 
Typ. 4 Places 
-. _ _~ .-.. -. ._ __ . . - . rlgure 4.11 LI u melt Mountmg Procedures 
4.04 Expansion Cabinet. The expansion cabinet is shipped 
in a cardboard box as shown in Figures 4.12 and 4.13. To un- aging material and the vinyl-plastic shroud covering 
the expansion cabinet, and unload the expansion 
crate an equipment cabinet, perform the following procedures: cabinet....

Page 146

I 
- 
SATURN IIE EPABX 
Installation Procedures A30808-X5130-8110-l-8928 
Issue 1, May 1986 
A4YL)I.I.J,LO,tm Figure 4.12 Expansion Cabinet Container 
4-17  

Page 147

,I 
- 
SATURN HE EPABX 
installation Procedures A30808-X5130-BllO-l-B928 
Issue 1, May 1986 
.’ 
A4962.l-3/26/66 
Figure 4.13 Expansion Cabinet Unpackaging Method 
4-18  

Page 148

SATURN IIE EPABX 
Installation Procedures A30808-X5130-6110-l-8928 
Issue 1, May 1986 
Expansion 
j Cabinet 
---a---. 
Basic 
Shelf 0 
(224 port LTU 
Shelf 3 
(256 ports) 
LTU 
Shelf 2 
(256 ports) 
Ir! - ,el L) 
I1 
1 LTU 
I 5%” FD DRIVES 1 
C4866.l-2/11/66 c: -. . -- 1 . 1 I..--.- - ~~. L -...-. - 
ryure 4.14 oaslc ana txpanslon Cabmets Equipment Configuration 
4-19  

Page 149

I 
- 
SATURN IIE EPABX A30808-X5130-BilO-I-8928 
Installation Procedures Issue 1, May 1986 
Table 4.03 Expansion Cabinet and Cabling 
‘Y. EQUIPMENT Cable No. PART NO. 
I Expansion Cabinet Assembly S30805-G5113-X04- * -8900 
I Power Cable Assembly 
(PSU J5 & J8) (LTUS 1,Ji & J2) (LTU Jl & J2) W6 C39195A9679-A6- * -8900 
I Power Cable Assembly (2nd AC Input) C39324-A9679-A7- * -8900 
I Signal Cable Assembly 
(BASS J60) to (LTUS 1, J46) w21 
(BASS J58) to (LTUS 1, J45) w22 
(BASS J59) to (LTUS 2, J46) W23...

Page 150

I - 
SATURN IIE EPABX 
Installation Procedures A30808-X5130-BliO-l-8928 
Issue 1, May 1986 
SATURN IIIE 
. 
P5070-l-3120166 
Figure 4.15 Basic and Expansion Cabinets (Front View) 
4-21  
Start reading Siemens Saturn Iie Epabx General Description Manual

Related Manuals for Siemens Saturn Iie Epabx General Description Manual

All Siemens manuals