Siemens Saturn Iie Epabx General Description Manual

SATURN IIE EPABX 
A30808-X5130-A120-l-8918 
Feature Descriptions 
Issue 1, May 1986 
effect, the forwarding station continues to ring for 
another no answer interval. At the end of the time in- 
terval, the forwarding process is attempted again. If the 
Call Forwarding - All Calls or Call Forwarding - Busy 
Lines feature is in effect, the forwarding station user 
may activate the Internal Call Queuing - Standby or 
Internal Call Queuing Callback features. A station with- 
in the circular hunt group that...

SATURN IIE EPABX 
Feature Descriptions 
4.11 
a. 
b. 
c. 
4.12 
a. 
b. 
C. Message Waiting Features 
Message Waiting - Automatic Callback (SLTSDT’) 
A station user that receives a message waiting indica- 
tion, can have the SATURN IIE EPABX System auto- 
matically attempt a connection to the activating station 
by dialing an access code. 
Message Waiting - Cancellation (SLTSDT’) 
A station user that receives a message from, or sends 
a message to another station, may cancel the message 
by dialing the...

SATURN IIE EPABX 
Feature Descriptions 
coexist in the system. Stations may be assigned either, 
both, or neither feature, based upon their individual 
class-of-service. The type of override performed, when 
allowed, is determined by the access code dialed. 
While listening to busy or special ringback tone, the 
calling party depresses the hookswitch and receives 
recall dial tone. The calling party then dials the access 
code assigned to Executive Override Without Warn- 
\, rng Tone. After a steady, low...

SATURN IIE EPABX 
Feature Descriptions A30808-X5130-A120-1-8918 
Issue 1, May 
1986 
SECTION 5.00 SIEMENS DIGITAL TELEPHONE FEATURES 
5.01 Siemens Digital Telephone Overview (SDT) 
The SATURN SDT is a sophisticated, digital electronic tele- 
phone which is available in three configurations: l6-button 
Jr. DYAD, 18-button DYAD, and 26-button DYAD, respectively. 
The buttons can be flexibly assigned to several lines, trunks, 
and/or features. 
An alphanumeric liquid crystal display is provided on the 18-...

SATURN IIE EPABX 
Feature Descriptions 
f. 
h. 
i. 
5.03 
a. 
5-2 I-Use Indication 
This feature is used by the SDT station user to deter- 
mine which line the user is presently utilizing. The SDT 
user activates this feature by depressing the I-Use fea- 
ture button. This causes all button LEDs to momen- 
tarily go dark with the exception of the button LED 
corresponding to the line in use by the user. The I-Use 
Indication lasts for a period of 1.5 seconds. This fea- 
ture is activated automatically...

SATURN IIE EPABX 
Feature Descriptions 
d. 
e. 
5.05 
a. 
b. 
5.06 
a. Saved Number Redial 
After dialing a destination number and while still off- 
hook, the SDT station user may store into system 
memory the just-dialed number by depressing the 
Saved Number Redial feature button. Later the user 
can have the stored number automatically redialed by 
depressing the same feature button. Only one num- 
ber can be stored at a time at each SDT 
Station-Defined Direct Dial 
The Station-Defined Direct Dial...

SATURN IIE EPABX 
Feature Descriptions A30808-X5130-A120-l-8918 
Issue 1, May 1986 
an existing call on hold to receive an incoming Voice 
Announce call. 
5.07 Display Features (1% and 26-Button SDTs only) 
a. Attendant Identification on Display 
An SDT station user dialing the attendant or receiving 
a call from the attendant results in the attendant indi- 
cator and attendant identification number being dis- 
played on the alphanumberic display (e.g., ATT 400). 
b. Call Forwarding Display 
An SDT...

SATURN IIE EPABX 
Feature Descriptions 
list. The first number of the speed call list can be dis- 
played by depressing the Speed Call feature button 
while remaining on-hook. Additional depressions of the 
Speed Call feature button cause other members of the 
speed call list to be displayed in sequence. 
p. Station Message Detail Recording Account Code 
Display 
This feature allows an SDT station user to depress the 
Account Code feature button and display the preas- 
signed default account code or the...

SATURN IIE EPABX 
Feature Descriptions 
turned ON or turned OFF by depressing the Hands- 
Free MUTE feature button. The SDT built-in micro- 
phone is muted (turned OFF) when the LED in the 
MUTE button is lit. Conversely, the SDT built-in micro- 
phone is active (turned ON) when the LED is off. 
The Hands-Free Mute feature has no control over the 
handset microphone. 
b. Hands-Free Operation 
This feature allows an SDT station user to originate or 
answer a call and converse with the other party without...

Siemens Practices 
General Series .-. A30308-X5~30-8110-1-~~2~ 
lssuc 1. May 19x