Siemens Saturn Iie Epabx General Description Manual

SATURN IIE EPABX 
Feature Descriptions A30808-X5130-A120-l-8918 - 
Issue 1, May 1986 
SECTION 3.00 ATTENDANT FEATURES 
3.01 Attendant Console Overview 
The attendant console is a desk-top-position console from 
which the attendant handles calls by using pushbutton keys. 
A maximum of 12 attendant consoles can be provided in the 
SATURN IIE EPABX. 
A telephone handset is furnished with the console. An op- 
tional headset may be substituted for the handset. Both tone 
and visual indicators alert the...

SATURN IIE EPABX 
Feature Descriptions 
To retrieve an attendant-held call, a station user hav- 
ing the proper class-of-service goes off-hook, then keys 
the Attendant Call Hold Retrieve access code, followed 
by a three-digit Attendant Call Hold location number. 
The Attendant Call Hold location number consists of 
the Attendant number (01 through 12) plus the Hold 
Loop Key number (1 through 4) used by the particular 
attendant; e.g., the Access Code + 021 (Attendant 
number 02, Hold Loop Key number...

A30808-X5130-A120-1-5918 
Issue 1, May 
1986 
k. 
m. Switched Loop Operation 
n. 
3.04 
a.  SATURN IIE EPABX 
Feature Descriptions 
Serial Calling 
This feature allows the attendant to connect an incom- 
ing trunk 
party to a series of stations, without having 
the incoming trunk party hang up and redial the at- 
tendant for each call. 
The attendant initiates a serial call by connecting the 
trunk party to the first desired station, and ““locking” 
the call on the attendant loop. When station discon-...

SATURN IIE EPABX A30808-X5130-A120-l-8918 
Feature Descriptions Issue 1, May 1986 
LINE LOCKOUT - Attendant extended to a locked- 
out station. 
OUT OF SVC - Attendant extended to an out-of- 
service station. 
ACD RINGING - Attendant extended to a ACD 
group. console handset is plugged in but not processing calls 
(idle), the actual number of calls waiting to be answered 
is displayed on the alphanumeric display. The num- 
ber of calls waiting is numerically displayed by call type 
(i.e., Incoming,...

SATURN IIE EPABX 
Feature Descriptions A30808-X5130-A120-l-8918 - 
Issue 1, May 1986 
3.08 
a. 
b. 
3.09 
a. 
b. signed key. One or more keys can be assigned on the 
attendant console to control each of the following: trunk 
groups, voice paging zones, dial dictation equipment, 
&port conference circuits (Meet-Me Conference and 
Station Controlled Conference), and code calling. When 
a station user dials an access code or activates a fea- 
ture button on an SDT corresponding to a facility that 
is under...

SATURN IIE EPABX 
Feature Descriptions 
SECTION 4.00 STATION FEATURES 
4.01 Station Overview 
This section of the practice describes those features that are 
related to single-line telephones (rotary and DTMF dialing). 
Some of these features are also related to the attendant con- 
sole and the SDT Following the title of each feature descrip- 
tion is one or more codes in parentheses which denote the 
type of instrument(s) to which the feature applies. Table 4.00 
lists these codes and their definitions....

SATURN IIE EPABX 
A30808-X5130-A120-l-8918 
Feature Descriptions 
Issue 1, May 1986 
4.04 Transfer Features 
a. Call Transfer (SLTSDT’) 
This feature allows a station user engaged in a two- 
party talking connection to transfer the other party to 
another destination. The following types of transfers 
are allowed: conference master can add members, remove mem- 
bers, leave the conference to consult with a conferee 
privately, or call the attendant. If the conference master 
releases from the conference,...

SATURN IIE EPABX 
Feature Descriptions A30808-X5130-A120-l-8918 
issue 1, May 1986 
the standby queuing mode, the calling party is provid- 
ed with special ringback tone while a call waiting tone 
is directed toward the busy station user. The busy sta- 
tion user may connect to the calling party either by go- 
ing on-hook and being recalled or by using the Call 
Hold - Flip - Flop (Broker) feature. This feature is 
provided to a station on an automatic originat- 
ing/terminating or manual originating...

SATURN IIE EPABX A30808-X5130-A120-l-8918 
Feature Descriptions issue 1, May 1986 
that hunt group. If no idle member is found, the Camp- 
On, Call Waiting, or Automatic Callback features may 
be applied on the FWD-TO station. A station within the 
hunt group that has this feature in effect is skipped dur- 
ing hunting. If the station is called direct (not part of 
a hunt sequence) the call is forwarded as described 
in the above paragraph. 
Activation of the Call Forwarding - All Calls feature via 
SDTs...

SATURN IIE EPABX 
Feature Descriptions 
4.08 Call Pickup Features 
a. Call Pickup - Directed (SLTSDT”) 
This feature allows a station user to answer any ring- 
ing station within the SATURN IIE EPABX System by 
dialing an access code and then the station number 
of the ringing station. The feature is usually limited by 
its nature to areas where the station to be picked up 
can be observed either by a positive audible indica- 
tion or a visual means (a local ringing indicator). 
Any number of stations...