Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

SATURN EPABX 
CMU Procedures A30808-X5051-E120-l-B919 
Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRCOS 
TITLE: LCR COS Assignments 
Access Level: 3, 4 Page 1 of 2 
STEP NO. PROMPT/EXPLANATION 
1. ) DIS LCRCOS 
2. DISPLAY LCR DATA COS? (Y,N) = a 
Requests whether LCR data COS information is to be displayed. a = Y = Yes, a = N = No. 
(OC II only.) 
3. ENTER RANGE TO DISPLAY = nn nn 
Requests LCR class of service for which data is to be displayed. nn = LCR class(es) of service (O-32). 
For...

SATURN EPABX 
A30808-X5051-E120-l-B919 
CMU Procedures issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRCOS 
TITLE: LCR COS Assignments Page 2 of 2 
STEP NO. PROMPT/EXPLANATION 
7. DISABLE FLAGS = aaaaaaaa . . . aaaaaaaa 
I 
Requests list of flags which should be changed from the enabled 
state to the disabled state. If more than one, separate each by space. 
Enter (CR) for no change. aaaaaaaa = flag(s); see Table 901.1. 
8. 1 ENABLE FLAGS = aaaaaaaa . . . aaaaaaaa 
I 
Requests list of flags...

SATURN EPABX 
CMU Procedures A30808-X5051-E120-l-8919 - 
Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRDPLN 
TITLE: LCR Dialing Plan 
Access Level: 3, 4 
STEP NO. PROMPT/EXPLANATION 
pi--l 
Page 1 of 2 
1. > DIS LCRDPLN 
2. RANGE, DGTS, OR ROUTE? (R,D,RT) = aa 
Requests whether LCR dialing plan data is to be displayed by range, aa = R = Range; aa = D = Digits; or 
digits, or route data. aa = RT = Route. 
NOTE: Enter “R” (or (CR)) to display a range of dialing plan entries (patterns); enter...

SATURN EPABX 
A30808-X5051-E120-l-B919 
CMU Procedures Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRDPLN 
TITLE: LCR Dialing Plan 
Page 2 of 2 
STEP NO. PROMPT/EXPLANATION 
1. ) DEL LCRDPLN 
NOTE: Before deleting a Dial Plan, it is recommended that the user do a “DISPLAY LCRDPLN” to verify the 
plan number about to be deleted. This is recommended because existing plan numbers may change 
as plans are added or deleted. 
2. ENTER PLAN # TO DELETE = nnn 
Requests number of dialing plan which...

SATURN EPABX A30808-X5051-E120-l-B919 - 
CMU Procedures Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRODR 
TITLE: LCR Outdialing Rules 
Access Level: 3, 4 
STEP NO. PROMPT/EXPLANATION rIizF=l 
Page 1 of 2 
1 
1. ) DIS LCRODR 
2. ENTER RULE # OR RANGE = nn 
nn 
Requests outdial rule number for which data is to be displayed. For nn = ODR number(s) (O-49). 
range, enter two ODRs, separated by space. Enter (CR) to display 
all. 
1. ) ADD LCRODR 
2. ENTER RULE # TO ADD = nn 
Requests outdial...

SATURN EPABX A30808-X5051-E120-l-8919 
CMU Procedures Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRODR 
TITLE: LCR Outdialing Rules 
Page 2 of 2 
Table 903.1 Outdial Rule Commands 
ALPHAMERIC 
INPUT DESCRIPTION 
APPEND Allows linkage of ODRs. 
DETECT Dial tone detection required. 
DETECT2 Causes a wait for secondary dial tone from the intermediate office (2.2 seconds of 
continuous dial tone). Use to interface with dial access SCCs. (See note.) 
ECHO Allows specific fields in the dialing...

SATURN EPABX 
CMU Procedures A30808X5051-E120-l-B919 - 
Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRROUTE 
TITLE: LCR Route Assignments 
Access Level: 3, 4 Page 1 of 3 
I STEP NO. PROMPT/EXPLANATION 
I 
1. > DIS LCRROUTE 
I 
2. ENTER RANGE TO DISPLAY = nn nn 
Requests LCR routes for which data is to be displayed. For range, nn = LCR route(s) (O-99). 
enter two route numbers, separated by space. Enter (CR) to dis- 
play all. 
1. > ADD LCRROUTE 
2. ENTER ROUTE NUMBER = nn 
Requests LCR...

SATURN EPABX A30808-X5051-E120-I-8919 
CMU Procedures 
Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRROUTE 
TITLE: LCR Route Assignments 
STEP NO. PROMPT/EXPLANATION Page 2 of 3 ‘_ 
I‘ 
;;j ‘; 
3. ENTER ELEMENT OR RANGE (O-7) = n n 
Requests element (or range of elements) number that is (are) to n = element(s) (O-7). 
be deleted within the specified LCR route(s). 
NOTE: Enter (CR) to delete all elements of LCR route. 
1. ) INS LCRROUTE 
NOTE: This procedure allows a route element to be...

SATURN EPABX A30808-X5051-E120-l-B919 
CMU Procedures Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRROUTE 
TITLE: LCR Route Assignments 
STEP NO. PROMPT/EXPLANATION Page 3 of 3 
4. NEW TRUNK GROUP, IF NEEDED = nn 
Requests new trunk group number to be assigned to this LCR route nn = trunk group number (O-31). 
element, if required. Enter (CR) for no change. 
5. NEW OUTDIAL RULE, IF NEEDED = nn 
Requests new outdial rule to be assigned to this LCR route element, nn = outdial rule number...

SATURN EPABX A30808-X5051-E120-2-8919 
CMU Procedures Issue 2, December 1985 
CUSTOMER MEMORY UPDATE PROCEDURE: LCRSCC 
TITLE: LCR Special Common Carrier Data 
Access Level: 3, 4 piF=J 
Page 1 
of 2 
STEP NO. PROMPT/EXPLANATION 
1. 
) DIS LCRSCC 
I 
I 
2. ENTER OPTION (SCCN OR HNPA) = aaaa . 
Requests whether SCC(n) or HNPA data are to be displayed. If SCCN, aaaa = SCCN = SCC data; 
go to step 3; if HNPA, procedure is completed. aaaa = HNPA = HNPA data. 
NOTE: Entering (CR) is the same as entering HNPA....