Sharp Mxm264n User Guide

2-73
COPIER
Contents
4
Touch the [OK] key.
You will return to the base screen of copy mode.
5
Place the original face down on the 
document glass.
Place the opened front cover and back cover face down.
6
Press the [START] key to scan the first original.
Scanning begins.
Scan the remaining original pages in the following order:
Opened inside of front cover and 1st page
Opened 2nd and 3rd page
·
·
·
Opened last page and inside of back cover
To cancel scanning...
Press the [STOP] key ( ).
7
Place the next...

2-74
COPIER
Contents
8
Touch the [Read-End] key.
Copying will begin.
To cancel scanning and copying...
Press the [STOP] key ( ).
 Four original pages will be copied onto each sheet of paper. Blank pages will be automatically added at the end if the total 
number of original pages is not a multiple of four.
 When book copy is selected, 2-sided copying is automatically selected. When settings are selected that prevent 2-sided 
copying, the book copy function cannot be used.
To cancel book copy...
Touch...

2-75
COPIER
Contents
COPYING CAPTIONS ONTO TAB PAPER (Tab Copy)
Captions can be copied onto the tabs of tab paper. Prepare appropriate originals for the tab captions.
Tab copy is possible from the bypass tray.
RELATION BETWEEN THE ORIGINALS AND THE TAB PAPER
Tab copying with a left binding
Tab copying with a right binding
OriginalsPlacing the originalsLoading tab paper
 Document feeder tray
Insert the originals so that the side with no tab text 
enters first.
Load the tab paper so that the tab on the...

2-76
COPIER
Contents
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the [Tab Copy] key.

Special modes menu (1st screen) (page 2-38)
3
Set the tab width.
(1) Set the image shift width (tab width) with 
the  keys.
0 mm to 20 mm (0 to 5/8) can be entered.
You can also directly touch a numeric value display key to 
change a number with the numeric keys.
(2) Touch the...

2-77
COPIER
Contents
COPYING BOTH SIDES OF A CARD ON ONE 
SHEET OF PAPER (Card Shot)
When copying a card, this function allows you to copy the front and reverse sides together onto a single sheet of paper.
This function is convenient for making copies for identification purposes and helps save paper.
1
Select the paper to be used for card 
shot.
Select the paper as explained in PAPER TRAYS (page 2-11).
2
Place the original face down on the 
document glass.
3
Select the special modes.
(1) Touch the...

2-78
COPIER
Contents
4
Select card shot settings.
(1) Enter the original size.
With the [X] key highlighted, enter the X (horizontal) 
dimension of the original with the   keys.
Touch the [Y] key and enter the Y (vertical) dimension of 
the original with the   keys.
You can also directly touch a numeric value display key to 
change a number with the numeric keys.
(A) To enlarge or reduce the images to fit the paper 
based on the entered original size, touch the [Fit to 
Page] key.
(B) The [Size Reset]...

2-79
COPIER
Contents
 The original must be placed on the document glass.
 Copying is only possible on standard size paper.
 XY Zoom cannot be used when using this function.
 The image cannot be rotated when using this function.
To cancel card shot...
Touch the [Cancel] key in the screen of step 4.
System Settings (Administrator): Card Shot Settings
This is used to set the values to which the size returns when the [Size Reset] key is pressed. 25 mm to 210 mm (1 to 8-1/2) 
can be entered for both the...

2-80
COPIER
Contents
PRINTING THE DATE AND A STAMP ON 
COPIES (Stamp)
Use this function to print the date, a stamp, the page number, and text on copies. In addition, specific text can be added 
to a copy as a watermark. (Watermark)*
Six printing positions are available: top left, top centre, top right, bottom left, bottom centre, and bottom right.
The printing positions are separated into areas that are used for the date, page number and text (A below), and areas 
that are used for a stamp (B below). The...

2-81
COPIER
Contents
GENERAL PROCEDURE FOR USING STAMP
To select stamp settings, follow the steps below.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Stamp] key.

Special modes menu (2nd screen) (page 2-39)
3
Select the print position.
Select from 6 positions: top left, top centre, top right, bottom 
left,...

2-82
COPIER
Contents
4
Select Stamp.
For detailed information on each of the stamp items, see the 
following sections:
Date:ADDING THE DATE TO COPIES (Date) 
(page 2-84)
Stamp: STAMPING COPIES (Stamp) (page 2-86)
Page numbering:PRINTING PAGE NUMBERS ON COPIES 
(Page Numbering) (page 2-88)
Text: PRINTING TEXT ON COPIES (Text) 
(page 2-92)
Watermark:ADDING A WATERMARK TO A COPY 
(Watermark) (page 2-98)
5
When you have finished selecting stamp 
settings, touch the   key.
6
Select settings for the original...