Sharp Mxm264n User Guide

2-93
COPIER
Contents
4
Select the pages to be printed on and 
touch the [OK] key.
Select printing on the first page only, or printing on all pages.
After touching the [OK] key, continue from step 5 of GENERAL 
PROCEDURE FOR USING STAMP (page 2-81) to complete 
the copy procedure.
Text settings can also be configured in the Web pages. Click [Application Settings], [Copy settings] and then [Text Settings 
(Stamp)] in the Web page menu.
To cancel a text setting...
Touch the [Cancel] key in the screen of...

2-94
COPIER
Contents Storing, editing, and deleting text strings
1
Touch the [Text] key in the stamp selection screen.
See steps 1 to 4 of GENERAL PROCEDURE FOR USING STAMP (page 2-81).
2
Touch the [Store/Delete] key.
3
Store a text string, or edit/delete a stored 
text string.
 To store a text string, touch a key with no text stored. 
A text entry screen will appear. A maximum of 50 characters 
can be entered. When you have finished entering the text, 
touch the [OK] key. The text entry screen will...

2-95
COPIER
Contents
4
Touch the [Back] key.
You will return to the screen of step 2.
To copy using a stored text string, continue from step 2 of 
PRINTING TEXT ON COPIES (Text) (page 2-92).
No.01 AAA AAA
No.03 CCC CCCNo.04
No.02 BBB BBB
No.05
No.07No.08
No.09No.10
No.06
13
105
Store/Delete
Stamp
Text
105
Store/Delete
Stamp
TextBack 

2-96
COPIER
Contents
CHECKING THE STAMP LAYOUT (Layout)
After stamp items have been selected, you can check the print layout, change the print position, and delete stamp items.
1
Touch the [Layout] key.
The [Layout] key can only be touched when stamp items have been selected.
2
If the layout is correct, touch the [OK] 
key.
Touch the key of the stamp item that you want to delete or 
whose position you want to change.
A maximum of 14 characters appear in each key.
3
To change the position of the item,...

2-97
COPIER
Contents
4
Touch the key of the desired destination 
position.
The touched position key is highlighted and the print position 
changes.
The keys that show the print positions will appear as follows 
depending on the state of the settings.
The above key is the top left key. The appearance of each key 
varies depending on the position of the key. 
If you wish to swap the position of the selected stamp item with the position of another stamp item, temporarily move 
either one of the items to an...

2-98
COPIER
Contents
ADDING A WATERMARK TO A COPY (Watermark)
This function requires the hard disk drive.
When making a copy, specific text can be added to the copy as a watermark. The density, angle, and pages (first page 
only or all pages) can be selected for a watermark. The watermark is printed at the centre of the paper.
Printing CONFIDENTIAL on the paper
The following 12 selections are available for the stamp text.
Three levels can be selected for the density of the watermark.
The angle of a...

2-99
COPIER
Contents
4
Touch the   keys to set the angle of 
the watermark.
5
Select the pages that the watermark will 
be printed on and touch the [OK] key.
Select printing on the first page only, or printing on all pages.
After touching the [OK] key, continue from step 5 of GENERAL 
PROCEDURE FOR USING STAMP (page 2-81) to complete 
the copy procedure.
The watermark text cannot be edited.
To cancel a watermark setting...
Touch the [Cancel] key in the screen of step 2.
CancelOK
PRIORITYCONFIDENTIAL
DO...

2-100
COPIER
Contents
[Image Edit] KEY
When the [Image Edit] key is touched in the 2nd special modes menu screen, the image edit menu screen opens.
Image edit menu screen
(1) [Photo Repeat] key

REPEATING PHOTOS ON A COPY (Photo Repeat) 
(page 2-101)
(2) [Multi-Page Enlargement] key

CREATING A LARGE POSTER (Multi-Page 
Enlargement) (page 2-103)
(3) [Mirror Image] key

REVERSING THE IMAGE (Mirror Image) (page 
2-106)(4) [Centring] key

COPYING IN THE CENTRE OF THE PAPER 
(Centring) (page 2-107)
(5) [B/W...

2-101
COPIER
Contents
REPEATING PHOTOS ON A COPY (Photo Repeat)
Photo Repeat is used to create repeated images of a photo-size original (130 mm x 90 mm size, 100 mm x 150 mm 
size, 70
 mm x 100 mm size, 65 mm x 70 mm size or 57 mm x 100 mm size (3 x 5 size, 5 x 7 size, 2-1/2 x 4 size, 
2-1/2
 x 2-1/2 size or 2-1/8 x 3-5/8 size)) on a single sheet of copy paper as shown below. Up to 24 images (when the 
image is 65
 mm x 70 mm size (2-1/2 x 2-1/2 size)) can be repeated on a single sheet of paper....

2-102
COPIER
Contents
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
(4) Touch the [Photo Repeat] key.

[Image Edit] KEY (page 2-100)
3
Select Photo Repeat settings.
(1) Touch the key showing the original type 
and paper size combination that you want 
to use.
Touch the   keys to switch through the screens and 
touch the desired repeat type key (A4 or A3 (8-1/2 x 11 
or 11 x 17)).
(2) Touch the [OK] key....