Sharp Mx M453n Owners Manual

7-14
SYSTEM SETTINGS
Contents Tray Settings
* The size that is automatically detected is set in Select Similar Sizes for Auto Detection in the bypass tray settings screen (see below).
Select Similar Sizes for Auto Detection
Select Similar Sizes for Auto Detection in the bypass tray settings screen is used to select the paper size that is 
automatically detected from similar sizes when automatic paper size detection takes place.
Select one of two sizes when Auto-Inch is set. Select one of three sizes when...

7-15
SYSTEM SETTINGS
Contents
Paper Type Registration
Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of 
paper properties.
Up to 7 paper types can be stored.
Auto Tray Switching
When a tray runs out of paper during printing, this determines whether or not another tray with the same size and type of 
paper is automatically selected and printing continues.
Custom Size Registration (Bypass)
If you frequently use a special non-standard paper...

7-16
SYSTEM SETTINGS
Contents
Address Control
Address Control is used to store, edit, and delete one-touch keys, group keys, program keys, and custom indexes. 
Touch the [Address Control] key to configure the settings.
Address Book
Destinations can be stored in the address book for easy retrieval.
When the [Address Book] key is touched, the following screen appears.
[Add New] key
Use this to add a new address.List display
This displays a list of the currently stored addresses. 
An address can be selected...

7-17
SYSTEM SETTINGS
Contents Settings
ItemDescription
Items stored in all modes
Address Type
Select the type of address to be stored in the address book.
 E-mail: Store an e-mail address in a one-touch key.
 Internet Fax: Store an Internet fax address in a one-touch key.
 Direct SMTP:Store a Direct SMTP address in a one-touch key.
 Fax: Store a fax number in a one-touch key.
 Group:  Store multiple addresses as a group for a broadcast transmission.
Search Number
Set a search number. The lowest available...

7-18
SYSTEM SETTINGS
Contents
Custom Index
The name of a custom index can be changed for greater ease of use.
Delete the previously entered name and enter a new name (maximum of 6 characters).
The factory default names for the custom indexes are User 1 to User 6.
Items appearing when an Internet fax address is stored
I-Fax AddressEnter an Internet fax address (max. 64 characters).
File FormatCompression Mode: Select the compression mode for transmission.
Request Internet Fax Reception ReportSelect...

7-19
SYSTEM SETTINGS
Contents
Program
If you frequently use the same settings and/or functions to transmit to the same destination or destinations, the settings 
and destinations can be stored in a program. This allows the settings and destinations to be selected by simply selecting 
the program.
When the [Program] key is touched, the following screen appears.
[Add New] key
Use this to add a new program.List display
This displays a list of the currently stored programs. A 
program can be selected to open...

7-20
SYSTEM SETTINGS
Contents
Fax Data Receive/Forward
This section explains settings for reception and forwarding. Touch the [Fax Data Receive/Forward] key and configure 
the settings.
I-Fax Settings
These settings can be configured when the Internet fax expansion kit is installed.
Reception Start
Touch this key to immediately connect to your mail server (POP3 server) and check for received Internet faxes. If you 
have received Internet faxes, the faxes will be retrieved and printed.
Manual Reception...

7-21
SYSTEM SETTINGS
Contents
Printer Condition Settings
The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS 
application. To configure the settings, touch the [Printer Condition Settings] key.
Printer Default Settings
The default settings are used to set advanced print conditions for printing in an environment where the print driver is not 
used (such as printing from MS-DOS or from a computer that does not have the provided print driver...

7-22
SYSTEM SETTINGS
Contents
*1 When a saddle stitch finisher or finisher is installed.
*2 When a finisher (large stacker) is installed.
*3 This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is 
normally no need to change this setting. When 0 is selected, all lines are printed at a width of 1 dot.
*4 Paper sizes that can be used with this function are A3, B4, A4, 11 x 17, 8-1/2 x 14, and 8-1/2 x 11. (This function 
may not take effect with...

7-23
SYSTEM SETTINGS
Contents
PostScript Setting
When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and 
whether or not the PostScript data is received in binary format.
Settings
ItemDescriptionSelections
Print PS Error
When a PS (PostScript) error 
occurs during PostScript printing, 
this setting determines whether or 
not an error notice is printed.  (Enabled)
  (Disabled)
Binary ProcessingReceive PostScript data in binary 
format....