Sharp Mx 4100n Owners Manual

2-100
COPIER
Contents Storing, editing, and deleting text strings
1
Touch the [Text] key in the stamp selection screen.
See steps 1 to 4 of GENERAL PROCEDURE FOR USING STAMP (page 2-87).
2
Touch the [Store/Delete] key.
3
Store a text string, or edit/delete a stored 
text string.
 To store a text string, touch a key with no text stored.
A text entry screen will appear. A maximum of 50 characters 
can be entered. When you have finished entering the text, 
touch the [OK] key. The text entry screen will...

2-101
COPIER
Contents
4
Touch the [Back] key.
You will return to the screen of step 2.
To copy using a stored text string, continue from step 2 of 
PRINTING TEXT ON COPIES (Text) (page 2-98).
No.01 AAA AAA
No.03 CCC CCCNo.04
No.02 BBB BBB
No.05
No.07No.08
No.09No.10
No.06
13
105
Store/Delete
Stamp
Text
105
Store/Delete
Stamp
TextBack 

2-102
COPIER
Contents
CHECKING THE STAMP LAYOUT (Layout)
After stamp items have been selected, you can check the print layout, change the print position, and delete stamp items.
1
Touch the [Layout] key.
The [Layout] key can only be touched when stamp items have been selected.
2
If the layout is correct, touch the [OK] 
key.
Touch the key of the stamp item that you want to delete or 
whose position you want to change.
A maximum of 14 characters appear in each key.
3
To change the position of the item,...

2-103
COPIER
Contents
4
Touch the key of the desired destination 
position.
The touched position key is highlighted and the print position 
changes.
The keys that show the print positions will appear as follows 
depending on the state of the settings.
The above key is the top left key. The appearance of each key 
varies depending on the position of the key. 
If you wish to swap the position of the selected stamp item with the position of another stamp item, temporarily move 
either one of the items to an...

2-104
COPIER
Contents
ADDING A WATERMARK TO A COPY (Watermark)
When making a copy, specific text can be added to the copy as a watermark. The color, density, angle, and pages (first 
page only or all pages) can be selected for a watermark. The watermark is printed at the center of the paper.
Printing CONFIDENTIAL on the paper
The following 12 selections are available for the stamp text.
Three levels can be selected for the density of the watermark.
Seven colors can be selected for the watermark color....

2-105
COPIER
Contents
3
Touch the [Print Color] key and set the 
color and density.
Touch the color that you wish to use.
If you wish to darken the selected color, touch the   key. If 
you wish to lighten the selected color, touch the   key.
When you have finished selecting the settings, touch the [OK] 
key.
 If you selected a color other than [Bk (Black)], press the [COLOR START] key. Pressing the [BLACK & WHITE 
START] key will print the stamp in black and white.
 If the stamp is printed in color on a...

2-106
COPIER
Contents
[Image Edit] KEY
When the [Image Edit] key is touched in the 2nd special modes menu screen, the image edit menu screen opens.
Image edit menu screen
(1) [Photo Repeat] key
☞REPEATING PHOTOS ON A COPY (Photo Repeat) 
(page 2-107)
(2) [Multi-Page Enlargement] key
☞CREATING A LARGE POSTER (Multi-Page 
Enlargement) (page 2-109)
(3) [Mirror Image] key
☞REVERSING THE IMAGE (Mirror Image) (page 
2-112)(4) [11x17 Full Bleed] key
☞COPYING 11 x 17 ORIGINALS WITH NO EDGE 
CUT-OFF (11 x 17 Full...

2-107
COPIER
Contents
REPEATING PHOTOS ON A COPY (Photo Repeat)
Photo Repeat is used to create repeated images of a photo-size original (3 x 5 size, 5 x 7 size, 2-1/2 x 4 size, 
2-1/2 x 2-1/2 size or 2-1/8 x 3-5/8 size (130 mm x 90 mm size, 100 mm x 150 mm size, 70 mm x 100 mm size, 
65 mm x 70 mm size or 57 mm x 100 mm size)) on a single sheet of copy paper as shown below. Up to 24 images 
(when the image is 2-1/2 x 2-1/2 size (65 mm x 70 mm size)) can be repeated on a single sheet of paper.
Original...

2-108
COPIER
Contents
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
(4) Touch the [Photo Repeat] key.
☞[Image Edit] KEY (page 2-106)
3
Select Photo Repeat settings.
(1) Touch the key showing the original type 
and paper size combination that you want 
to use.
Touch the   keys to switch through the screens and 
touch the desired repeat type key (8-1/2 x 11 or 
11 x 17 (A4 or A3)).
(2) Touch the [OK] key....

2-109
COPIER
Contents
CREATING A LARGE POSTER (Multi-Page 
Enlargement)
This function is used to enlarge an image of an original and print it as a composite image using multiple sheets of paper.
1
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
(4) Touch the [Multi-Page Enlargement] key.
☞[Image Edit] KEY (page 2-106)
Original
(8-1/2 x 11 (A4) size)
Copy (enlarged image on 8 
sheets of 11 x 17 (A3) paper)