Sharp Mx 4100n Owners Manual

2-130
COPIER
Contents
7
Change the settings.
(1) Touch the key of the setting that you want 
to change.
The setting screen of the touched key opens. Change the 
settings and touch the [OK] key.
(2) Touch the [OK] key.
 To change the number of sets printed, set the desired number of copies (sets) with the numeric keys. After changing 
the number of sets, touch the [End] key in the touch panel (not the [START] key) to print the sets.
 Special modes that can be adjusted are Margin Shift, Pamphlet Copy,...

2-131
COPIER
Contents
CHECKING THE NUMBER OF SCANNED 
ORIGINAL SHEETS BEFORE COPYING 
(Original Count)
The number of scanned original sheets can be counted and displayed before copying is executed. By allowing you to check 
the number of original sheets that were scanned, this helps reduce the occurrence of copy mistakes.
1
Insert the originals face up in the 
document feeder tray.
Insert the originals all the way into the document feeder tray. 
Multiple originals can be placed in the document feeder...

2-132
COPIER
Contents
4
After scanning is finished, check the 
number of sheets that were scanned and 
touch the [OK] key.
Copying will begin.
 When job build mode is used, the number of scanned sheets 
appears when the [Read-End] key is touched.
 The number that is displayed is the number of scanned 
original sheets, not the number of scanned original pages. 
For example, when two-sided copying is performed using 
one original, the number 1 will appear to indicate that one 
original sheet was scanned,...

2-133
COPIER
Contents
COPYING ORIGINALS OF DIFFERENT SIZES
(Mixed Size Original)
Even when 8-1/2 x 14 (B4) originals are mixed in with 11 x 17 (A3) originals, all originals can be copied at once. When 
scanning the originals, the machine automatically detects the size of each original and uses paper appropriate for that size.
When mixed size original is combined with auto ratio selection, the ratio is adjusted individually for each original according 
to the selected paper size, enabling output on a...

2-134
COPIER
Contents
1
Insert the originals face up in the 
document feeder tray.
●When Same Width is used
Place the originals with the sides that are the same length 
aligned on the left.
●When Different Width is used
Place the originals with the corners aligned in the far left corner 
of the document feeder tray.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Mixed Size Original] key.
☞Special modes menu (2nd screen)...

2-135
COPIER
Contents
4
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
To cancel scanning and copying...
Press the [STOP] key ( ).
 When [Different Width] is selected on the MX-4101N/5001N, 2-Sided to 2-Sided and 2-Sided to 1-Sided of automatic 
two-sided copying can be used.
On other models, automatic two-sided copying cannot be used.
 When [Different Width] is selected, the staple function cannot be used.
 The mixed size original function cannot be used to copy...

2-136
COPIER
Contents
COPYING THIN ORIGINALS (Slow Scan 
Mode)
Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent 
thin originals from misfeeding.
1
Insert the originals face up in the 
document feeder tray.
Insert the originals all the way into the document feeder tray. 
Multiple originals can be placed in the document feeder tray. 
The stack of originals must not be higher than the indicator line 
on the tray.
If the originals are...

2-137
COPIER
Contents
The 2-Sided to 2-Sided and 2-Sided to 1-Sided modes of automatic 2-sided copying cannot be used. 
To cancel the slow scan mode setting...
Touch the [Slow Scan Mode] key in the screen of step 2 so that it is not highlighted.
System Settings (Administrator): Original Feeding Mode
This is used to have scanning always take place in slow scan mode. 

2-138
COPIER
Contents
This section explains convenient copy functions such as interrupting a copy run, changing the order of reserved copy 
jobs, and storing copy settings in a program.
INTERRUPTING A COPY RUN
(Interrupt copy)
When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy. 
Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job first.
CONVENIENT COPY FUNCTIONS
1
Touch the [Interrupt] key.
The...

2-139
COPIER
Contents
 If user authentication is enabled, the login screen will appear when the [Interrupt] key is pressed. Enter your user name 
and password to log in. The number of copies made will be added to the count of the user that logged in.
 Depending on the settings of the job in progress, the [Interrupt] key may not appear.
 Depending on the settings of the job in progress, the [Reserve] key may appear instead of the [Interrupt] key. Unlike 
interrupt copy, reserve copy does not temporarily...