Sharp Mx 4100n Owners Manual

2-110
COPIER
Contents
2
* The size that is twice A0 size.
Set the enlargement size and the original 
size.
(1) Select the size system that you wish to use 
for multi-page enlargement.
Touch the   keys to display the screen that shows 
the desired group of sizes.
 1st screen: Inch system
 2nd screen: A system
 3rd screen: B system
(2) Select the enlargement size.
(3) Select the size of the original to be used.
A suitable original placement orientation (A) and the 
number of sheets of paper required for...

2-111
COPIER
Contents
4
Touch the [OK] key.
You will return to the special modes screen. Touch the [OK] key 
to return to the base screen of copy mode.
5
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and 
then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the 
first original.
To cancel...

2-112
COPIER
Contents
REVERSING THE IMAGE (Mirror Image)
This feature is used to make a copy that is a mirror image of the original.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image Edit] KEY (page 2-106)
3
Select Mirror Image.
(1) Touch the [Mirror Image] key so that it is 
highlighted....

2-113
COPIER
Contents
COPYING 11 x 17 ORIGINALS WITH NO EDGE 
CUT-OFF (11 x 17 Full Bleed)
This feature lets you copy an entire 11 x 17 (A3) size original at full size with no image cut-off at the edges.
12 x 18 (A3W) size paper is used, which is slightly larger than 11 x 17 (A3) size.
1
Place the original face down on the 
document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image Edit] KEY...

2-114
COPIER
Contents
4
Place 12 x 18 (A3W) paper in the 
bypass tray.
Pull out the extension tray, adjust the guides to the width of 
12 x 18 (A3W) paper, and place the paper in the bypass tray.
After loading the paper, configure the bypass tray settings as 
explained in MAKING COPIES USING THE BYPASS TRAY 
(page 2-40).
5
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages...

2-115
COPIER
Contents
COPYING IN THE CENTER OF THE PAPER (Centering)
This is used to center the copied image on the paper.
This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the 
image is reduced.
Not using the centering functionUsing the centering function
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2)...

2-116
COPIER
Contents
 The image can be reduced when using the centering function, but not enlarged.
 When the original size or the paper size is displayed as a special size, this function cannot be used.
To cancel centering...
Touch the [Centering] key in the screen of step 3 so that it is not highlighted. 

2-117
COPIER
Contents
REVERSING WHITE AND BLACK IN A COPY (B/W Reverse)
This is used to reverse black and white in a copy to create a negative image. This function can only be used for black 
and white copying.
Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce 
toner consumption.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the...

2-118
COPIER
Contents
When this function is selected, the Original Image Type setting for exposure adjustment automatically changes to Text.
To cancel B/W reverse...
Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted. 

2-119
COPIER
Contents
[Color Adjustments] KEY
When the [Color Adjustments] key is touched in the 2nd special modes menu screen, the color adjustments menu 
screen opens.
Color adjustments menu screen
(1) [RGB Adjust] key
☞ADJUSTING RED/GREEN/BLUE IN COPIES (RGB 
Adjust) (page 2-120)
(2) [Sharpness] key
☞ADJUSTING THE SHARPNESS OF AN IMAGE 
(Sharpness) (page 2-121)
(3) [Suppress background] key
☞WHITENING FAINT COLORS IN COPIES 
(Suppress Background) (page 2-122)(4) [Color Balance] key
☞ADJUSTING THE...