Sharp Mx 4100n Owners Manual

2-50
COPIER
Contents
COPYING EACH FACING PAGE OF A 
BOUND DOCUMENT (Dual Page Copy)
The dual page copy function produces separate copies of two document pages that are placed side by side on the 
document glass. This function is useful when making copies of the facing pages of a book or other bound document.
Copying the facing pages of a book or bound document
1
Place the original on the document glass.
Align the center of the original with the appropriate size mark  .
2
Select 8-1/2 x 11 (A4) size...

2-51
COPIER
Contents
3
Select Dual Page Copy.
(1) Touch the [Special Modes] key.
☞SPECIAL MODES (page 2-43)
(2) Touch the [Dual Page Copy] key so that it is 
highlighted.
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
4
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and 
then touch the [Read-End] key. (For the second original and...

2-52
COPIER
Contents
MAKING COPIES IN PAMPHLET FORMAT 
(Pamphlet Copy)
This function copies 2 original pages onto the front side and 2 original pages onto the reverse side of each sheet of 
paper so that the copies can be folded at the centerline to form a pamphlet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
Pamphlet copy using 8 original pages
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
If...

2-53
COPIER
Contents
3
Select pamphlet copy settings.
(1) If the original is 1-sided, touch the [1-Sided] 
key. If the original is 2-sided, touch the 
[2-Sided] key.
(2) Select the binding edge ([Left Binding] or 
[Right Binding]).
(3) To insert a cover, touch the [Cover Setting] 
key.
If you do not want to add a cover, go to step 5.
4
Select cover settings.
(1) If the cover sheet will be copied on, touch 
the [Yes] key. Otherwise, touch the [No] 
key.
(2) Select paper settings for the cover.
(A) The...

2-54
COPIER
Contents
5
Touch the [OK] key.
You will return to the base screen of copy mode.
6
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned 
and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for 
the first original.)
To cancel scanning of the original and copying...
Press the...

2-55
COPIER
Contents
COPYING A LARGE NUMBER OF 
ORIGINALS AT ONCE (Job Build)
When copying a very large number of originals, this function allows you to divide the originals into sets and feed each 
set through the automatic document feeder one set at a time.
Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the 
maximum number that can be inserted.
This function is convenient when you wish to sort copies of a large number of originals into...

2-56
COPIER
Contents
4
Insert the next set of originals and press the [COLOR START] key or the [BLACK 
& WHITE START] key.
Repeat this step until all originals have been scanned.
The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals. If you need 
to change the copy setting, follow the steps in Changing the copy settings for each set of originals.
To cancel scanning...
Press the [STOP] key ( ). All scanned data will be cleared.
5
Touch the [Read-End]...

2-57
COPIER
Contents Changing the copy settings for each set of originals
The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals.
Perform the step below before pressing the [Start] key to scan the originals in step 4 above.
1
Touch the [Change] key.
2
Change the desired copy settings in the 
screen that appears and press the [Start] 
key.
Scanning of the originals will begin using the changed copy 
settings.
To cancel the copy setting changes and begin...

2-58
COPIER
Contents
USING TWO MACHINES TO MAKE A LARGE 
NUMBER OF COPIES (Tandem Copy)
Two machines connected to the same network can be used to run a large copy job in parallel.
Each machine prints half of the copies, reducing the time required to complete the job.
Master machine and slave machine
In the following explanation, the master machine is the machine that is used to scan the originals. The slave machine is 
another machine specified in the master machine that only helps print the copies; it...

2-59
COPIER
Contents
3
Set the number of copies (number of 
sets) with the numeric keys.
Up to 999 copies (sets) can be set. When the [COLOR START] 
key or the [BLACK & WHITE START] key is pressed, the 
copies will automatically be divided between the master and 
slave machines.
If an odd number of copies is set, the master machine will print 
the extra set.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
4
Press the [COLOR START] key or the [BLACK...