Sharp Mx 4100n Owners Manual

2-40
COPIER
Contents
MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and 
other special media.
For detailed information on paper that can be loaded in the bypass tray, see IMPORTANT POINTS ABOUT PAPER 
(page 1-27) in 1. BEFORE USING THE MACHINE. For precautions when loading paper in the bypass tray, see 
LOADING PAPER IN THE BYPASS TRAY (page 1-34) in 1. BEFORE USING THE MACHINE.
1
Place the original....

2-41
COPIER
Contents
4
Check the paper type setting for the 
bypass tray. If you need to change the 
setting, touch the paper type key.
If you do not need to change the paper size and type that 
appear under Bypass Tray, go to step 7.
5
Select the type of paper used in the 
bypass tray.
Select the paper type that you will use.
6
Set the paper size.
(1) Select the paper size.
[Auto-Inch] key
When the paper placed in the bypass tray is an inch size 
(8-1/2 x 11, etc.), the paper size will be detected...

2-42
COPIER
Contents Enter the paper size of the bypass tray
When the [Custom Size] key is touched, the paper size entry screen appears.
Touch the [X] key and enter the horizontal dimension of 
the paper with the   keys, and then touch the [Y] 
key and enter the vertical dimension. When finished, 
touch the [OK] key.
7
Select the bypass tray.
(1) Touch the paper size key of the bypass tray.
(2) Touch the [OK] key.
8
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Scanning begins.
 If the...

2-43
COPIER
Contents
This chapter explains Margin Shift, Erase, Dual Page Copy, and other special modes.
SPECIAL MODES
When the [Special Modes] key is pressed in the base screen, the special modes menu screen appears. The special 
modes menu consists of two screens. Touch the   keys to move between the screens. After selecting special 
mode settings, touch the [OK] key in the special modes menu screen to complete the settings and return to the base 
screen of copy mode.
Special modes menu (1st screen)...

2-44
COPIER
Contents Special modes menu (2nd screen)
(1) [Stamp] key
☞PRINTING THE DATE AND A STAMP ON COPIES 
(Stamp) (page 2-86)
(2) [Image Edit] key
☞[Image Edit] KEY (page 2-106)
(3) [Color Adjustments] key
☞[Color Adjustments] KEY (page 2-119)
(4) [File] key
This saves a job in a folder of the document filing 
function.
(5) [Quick File] key
This saves a job in the Quick File folder of the document 
filing function. (6) [Proof Copy] key
☞CHECKING COPIES BEFORE PRINTING (Proof 
Copy) (page 2-128)
(7)...

2-45
COPIER
Contents [OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as 
follows:
(A) Enter the selected special mode settings and return to the base screen of copy mode.
(B) Enter the selected special mode settings and return to the special modes menu screen. Touch this key when you 
wish to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the...

2-46
COPIER
Contents
ADDING MARGINS (Margin Shift)
This function is used to shift the copy image right, left or down to adjust the margin.
This is convenient when you wish to bind the copies with a string or in a binder.
Shifting the image to the right so the copies can be bound at the left edge with a string
Margin shift positions
11
Not using margin shiftUsing margin shift
The punch holes cut off 
part of the imageThe image is moved to 
allow space for the string 
holes so the image is not 
cut off....

2-47
COPIER
Contents
4
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 
touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first 
original.)
To cancel scanning...

2-48
COPIER
Contents
ERASING PERIPHERAL SHADOWS (Erase)
The erase function is used to erase shadows around the edges of copies that occur when copying thick originals or 
books.
When a thick book is copied
Erase modes
Shadows appear here
Not using the erase 
functionUsing the erase 
function
Shadows appear on the 
copy.Shadows do not appear on 
the copy.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch...

2-49
COPIER
Contents
3
Select the erase settings.
(1) Touch the desired erase mode.
Select one of the four positions.
Touch the [Side Erase] key to open the following screen.
Touch the checkbox of the edge that you wish to erase 
and make sure that a checkmark appears.
When performing 1-sided to 2-sided copying or 2-sided to 
2-sided copying, set the erase edge on the reverse side.
 If you touch the [Same Side as Side 1] key, the edge in 
the same position as on the front side will be erased.
 If you...