Sharp Mx 4100n Owners Manual
Here you can view all the pages of manual Sharp Mx 4100n Owners Manual. The Sharp manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 111
1-70 BEFORE USING THE MACHINE Contents 1 Open the front cover. Locations of color toner cartridges (A): Yellow (B): Magenta (C): Cyan (D): Black 2 Pull the toner cartridge toward you. Raise the toner cartridge lever and gently pull the toner cartridge horizontally toward you. When pulling out the toner cartridge, pull it out gently. If the cartridge is pulled out abruptly, toner may spill out. Example: Replacing the yellow toner cartridge Hold the toner cartridge with both hands as shown and pull it...
Page 112
1-71 BEFORE USING THE MACHINE Contents 5 Insert the new toner cartridge horizontally. A toner cartridge of a different color cannot be installed. Be sure to install a toner cartridge of the same color. 6 Push the cartridge in until it locks securely in place. Push the cartridge firmly in until it clicks into place. 7 Close the front cover. After the toner cartridge is replaced, the machine automatically enters image adjustment mode. Caution Do not throw a toner cartridge into a fire. Toner may fly and...
Page 113
1-72 BEFORE USING THE MACHINE Contents REPLACING THE WASTE TONER BOX The waste toner box collects excess toner that is produced during printing. When the waste toner box becomes full, Replace used toner container. will appear. Follow the procedure below to replace the waste toner box. 1 Open the front cover. 2 Release the used waste toner box. Press the waste toner box release button. The waste toner box will fall forward as shown at left. Wait until the box comes to a stop. Keep the replacement...
Page 114
1-73 BEFORE USING THE MACHINE Contents 4 Place the box on a flat surface. Place a sheet of newspaper on the surface before placing the box. Do not point the holes down as used toner will spill out. 5 Remove the seals around the holes. Grasp the edge of each seal and pull it out toward you. There are 4 seals. Remove all of the seals. 6 Plug the holes. Grasp the edge of each black seal and insert it into a hole in the box to plug the hole. There are 4 seals. Plug all of the holes. Do not discard the...
Page 115
1-74 BEFORE USING THE MACHINE Contents 8 Push the waste toner box into the machine. Push the box in until it clicks into place. 9 Close the front cover. Caution Do not throw the waste toner box into a fire. Toner may fly and cause burns. Store the waste toner box out of the reach of small children. When replacing the waste toner box, be aware that it may soil your clothes or the immediate surroundings.
Page 116
1-75 BEFORE USING THE MACHINE Contents REPLACING THE STAMP CARTRIDGE If a stamp unit (AR-SU1) is installed on the automatic document feeder and the stamp has become faint, replace the stamp cartridge (AR-SV1). Supplies Stamp cartridge (2 in package) AR-SV1 MX-4101N/5001N 1 Open the automatic document feeder. 2 Remove the document backplate sheet from the automatic document feeder. Remove the sheet slowly. Place the removed sheet with the side that was attached face up on the document glass. 3 Grasp...
Page 117
1-76 BEFORE USING THE MACHINE Contents 5 Install a new stamp cartridge. 6 Push the stamp unit back in. Push the stamp unit in until it clicks into place. 7 Close the automatic document feeder to attach the document backplate sheet. When the automatic document feeder is closed, the document backplate sheet on the document glass attaches to the automatic document feeder. 8 Make sure that the document backplate sheet is firmly attached to the automatic document feeder and then close the automatic...
Page 118
1-77 BEFORE USING THE MACHINE Contents MX-4100N 1 Open the automatic document feeder. 2 Open the holders on the automatic document feeder that hold the original pressure sheet. Open the holders (two) on the left and right sides. 3 Grasp the tab on the stamp unit and pull the unit out. 4 Remove the stamp cartridge (A). 5 Install a new stamp cartridge. Tab (A)
Page 119
1-78 BEFORE USING THE MACHINE Contents 6 Push the stamp unit back in. Push the stamp unit in until it clicks into place. 7 Replace the original pressure sheet. Push the holders in until they click into place. 8 Close the automatic document feeder.
Page 120
1-79 BEFORE USING THE MACHINE Contents This section explains the text entry screen. FUNCTIONS OF THE MAIN KEYS ENTERING TEXT KeyDescription This changes the text entry screen from the lower case screen to the upper case screen. The upper case screen will continue to appear until the [Caps] key is touched again so that it is no longer highlighted. The [Caps] key is convenient when you wish to enter all capital letters. This key temporarily changes the keys in the text entry screen to upper case when...