Sharp Mx 4100n Owners Manual

2-20
COPIER
Contents
8
Touch the [Read-End] key.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
System Settings (Administrator): Initial Status Settings (2-Sided Copy)
The default 2-sided copy mode can be changed.
Read-End
Place next original. Press [Start].
When finished, press [Read-End]. 

2-21
COPIER
Contents
COPY COLOR MODES
The color mode of the [COLOR START] key is normally set to [Full Color] so that copying takes place in full color mode 
when the [COLOR START] key is pressed. If color originals are mixed together with black & white originals, set the color 
mode to [Auto] to have the color mode change appropriately for each original.
Touch the [Color Mode] key in the base screen to open the following screen.
Touch the key of the desired color mode and then touch the [OK] key.
Full...

2-22
COPIER
Contents Selecting single color copying
When [Single Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the 
[OK] key.
Selecting 2 color copying
When [2 Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the [OK] 
key.
 When auto mode is used, there may be some originals for which switching between color and black & white does not take 
place correctly. In this event, press the [COLOR...

2-23
COPIER
Contents
CHANGING THE EXPOSURE AND ORIGINAL 
IMAGE TYPE
The exposure and original image type can be selected to obtain a clear copy.
AUTOMATIC ADJUSTMENT OF THE EXPOSURE AND 
ORIGINAL TYPE
Automatic exposure adjustment operates by default to automatically adjust the exposure level and original type as 
appropriate for the original being copied. (Auto is displayed.)
This function automatically adjusts the image during black & white copying and full color copying to obtain the most suitable...

2-24
COPIER
Contents
2
Adjust the exposure level.
Touch the   key to make the copy darker.
Touch the   key to make the copy lighter.
Using a copy or printed page as an original
When using a copy or printed page from the machine as an 
original, touch the [Copy of Copy] checkbox so that a 
checkmark  appears.
When [Copy of Copy] is selected, only the [Text], [Printed 
Photo], and [Text/Printed Photo] original image type keys 
can be selected.
To enhance the color of a color copy...
Touch the [Color Tone...

2-25
COPIER
Contents
REDUCTION/ENLARGEMENT/ZOOM
AUTOMATIC RATIO SELECTION (Auto Image)
This section explains the automatic ratio selection function (Auto Image), which automatically selects the ratio to match 
the paper size.
When the paper tray is manually changed, the [Auto Image] key appears in the base screen of copy mode. Touch the 
[Auto Image] key to have the reduction or enlargement ratio automatically selected based on the original size and the 
selected paper size.
First place the original and...

2-26
COPIER
Contents
MANUALLY SELECTING THE RATIO (Preset 
ratios/Zoom)
Touch the [Copy Ratio] key in the base screen of copy mode to select one of five preset enlargement ratios or four 
preset reduction ratios (maximum 400%, minimum 25%).
In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
1
Set the ratio.
Touch a preset ratio key and/or the zoom keys to set the ratio.
There are two setting screens. Use the   keys to switch 
between the screens.
●1st...

2-27
COPIER
Contents
2
Touch the [OK] key.
After touching the [OK] key, make sure that a paper size 
suitable for the ratio is selected.
When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both 25% to 200%.
To return the ratio to 100%...
To return the ratio setting to 100%, touch the [Copy Ratio] key to display the ratio menu and then touch the [100%] key.
System Settings (Administrator): Add or Change Extra Preset Ratios
Two enlargement preset ratios (101%...

2-28
COPIER
Contents
ENLARGING/REDUCING THE LENGTH AND WIDTH 
SEPARATELY (XY Zoom)
The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately.
Both the horizontal and vertical ratios can be set from 25% to 400% in increments of 1%.
Touch the [Copy Ratio] key in the base screen of copy mode and then follow the steps below.
When 50% is selected for the horizontal ratio and 70% is selected for the vertical ratio
1
Touch the [XY Zoom] key.
2
Set the horizontal and vertical...

2-29
COPIER
Contents
ORIGINAL SIZES
SPECIFYING THE ORIGINAL SIZE
When the original size is a non-standard size or is not detected correctly, manually specify the original size.
Touch the [Original] key in the base screen of copy mode and then follow the steps below.
Specifying an inch original size
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
Specifying an AB original size
(1) Touch the [AB Inch] key.
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
Specifying...