Sega Virtua Striker 2002 Kit Installation Service Manual
Here you can view all the pages of manual Sega Virtua Striker 2002 Kit Installation Service Manual. The Sega manuals for Games are available online for free. You can easily download all the documents as PDF.
Page 61
56www.seuservice.com57www.seuservice.com 7 - 3 REPLACING THE DIMM BOARD BATTERY PACK Do not disassemble the battery pack and the batteries. If you should fail to observe this instruction, the internal wires and/or protective devices may be damaged; as a result the safety system may not function when discharging and recharging, eventually causing an overheating, fire and explosion. If you should disassemble the batteries, the generated gases may harm your throat and the negative plate may...
Page 62
58www.seuservice.com59www.seuservice.com Do not tightly seal the battery pack when installing it onto an external device. Flammable gas is generated from the battery when its safety mechanism has functioned. If you should fail to observe the above-described instruction, sparks from motors, switches, etc. may cause the gas to fire. Therefore, install the battery pack so that the gas can be quickly released from the external device. Do not use the battery pack for the device/usage other...
Page 63
58www.seuservice.com59www.seuservice.com FIG. 7. 3 BATTERY COVER BATTERY PACK 401-0076 When a GD-ROM readout time seems to be longer than before, the cause may be a reduction of DIMM board battery pack's charge. Usually, the DIMM board battery pack reaches its service life about 16 months after starting to use. Do not use a battery charger because any battery charger is not usable for this battery pack. Instead, replace the battery pack with a new one as follows: Refer to "7-1...
Page 64
60www.seuservice.com61www.seuservice.com 7 - 4 KEY CHIP KEY CHIP DIMM BOARD CASE KEY CHIP SLOT TAB FIG. 7. 4 The key chip is a precision device. Handle it carefully because it may be dam- aged by heat, shock, and static electricity. The key chip is contained in the GD-ROM disc case. Always use them as a set. Installing the key chip Remove the key chip from the GD-ROM disc case. Insert the key chip vertically into the slot of the DIMM board case for TRIFORCE; be careful...
Page 65
60www.seuservice.com61www.seuservice.com Handling the GD-ROM Disc Do not contaminate the discs with your fingerprints or dust particles. Contaminated discs may lower audio and video quality. When cleaning the discs, do not use volatile chemicals (benzine, thinner, etc.), cleaning sprays, and antistatic agents. Do not use cracked, warped, or damaged discs. Do not attach papers or seals onto the discs; do not scratch the discs. Do not use the discs with a sign of peeled seals,...
Page 66
62www.seuservice.com63www.seuservice.com FIG. 7. 5 Installing the GD-ROM disc Remove the 1 truss head screw that fixes the GD-ROM drive lid (DISC LID). And turn clockwise the lid to remove. Take out the GD-ROM disc from its case, and set it onto the GD-ROM drive with a printed side facing you. Return the lid to its original place, and fix it with 1 truss head screw. Be careful not to fasten it too tightly. Removing the GD-ROM disc Remove the 1 truss head screw that fixes the GD-ROM drive lid...
Page 67
62www.seuservice.com63www.seuservice.com 5080 5141505031 838-13616 AUDIOPOWERAMP2CH JSTVH4P TRANSFORMER 0V120V 0V17V0V17V � PC WHITE(U/P) 132PC 560-5407 PC JSTVL +12V GNDGNDGND +3.3V+5V GND +5V GND 400-5397 SWREGUFORJVS 600-6743-050 600-7141-050 JSTVL +3.3V PC 838-13683-91 3 2 1 30105050 120 VacInput [Extra] 5kpot SpeakerOutputs ToPIN8 ofJamma ToExtra YellowWire JAMMACONNECTIONSUSEDARE: �VIDEOOUT �SWITCHINPUTS �SWITCHGROUNDRETURNS �COINCOUNTEROUTPUT NOTE:THEREARETOBENO CONNECTIONSMADETOTHE...
Page 69
Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workman- ship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating con di- tions. No other product in this machine is hereby covered. Sellers sole liability in the event a...