Sega Virtua Striker 2002 Kit Installation Service Manual
Here you can view all the pages of manual Sega Virtua Striker 2002 Kit Installation Service Manual. The Sega manuals for Games are available online for free. You can easily download all the documents as PDF.
Page 41
36www.seuservice.com37www.seuservice.com 6 - 1 - 8 CLOCK SETTING Use CLOCK SETTING to set the TRIFORCE internal clock. (1)Use the SERVICE Button to move the cursor to the item to be set. (2)Move the cursor to the desired item and press the TEST Button to increase values. The max value for YEAR is "2099"; further increases return the value to "2000". (3)Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. CLOCK SETTING 2002/11/15(FRI) 05:10:34...
Page 42
38www.seuservice.com39www.seuservice.com 6 - 1 - 9 NETWORK SETTING Use NETWORK SETTING to establish and test network connections. This is only displayed when a network enabled MEDIA BOARD is connected to the TRIFORCE. This game does not support network communication connections. Set (A) NETWORK TYPE to "NONE". (1)Use the SERVICE Button to move the cursor to the desired test item. (2) Press the TEST Button to change the setting or to open the detailed settings. (3)Move the cursor to EXIT and...
Page 43
38www.seuservice.com39www.seuservice.com (B) SET IP ADDRESS This sets up the details of the communication network. Depending on the NETWORK TYPE setting, the contents of setting vary. If setting to NONE, it does not appear. ETHER Setting MOBILE Setting SET IP ADDRESS 1/1 ->REMOTE ENABLE IP ADDRESS(E) ---.---.---.--- SUBNET MASK(E) ---.---.---.--- EXIT CURRENT ************ ***.***.***.*** SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON SET IP ADDRESS...
Page 44
40www.seuservice.com41www.seuservice.com ETHER+MOBILE Settings (1)Use the SERVICE Button to move the cursor to the desired test item. (When setting IP ADDRESS or SUBNET MASK, use the underline as a guide.) (2)Press the TEST Button to change the setting. (3)Move the cursor to EXIT and press the TEST Button to return to the NETWORK SETTING screen. (E) REMOTE This sets up whether a communication setting is automatic or manual. ENABLE: Sets the communication setting...
Page 45
40www.seuservice.com41www.seuservice.com To clear data, use the SERVICE Button to move the cursor to YES (CLEAR) and press the TEST Button. When the data has been cleared, the message "COMPLETED" is displayed. Press the TEST Button again to return to the NETWORK SETTING main screen. Move the cursor to NO (CANCEL) and press the TEST Button to return to the NETWORK SETTING main screen without clearing the data. (C) NETWORK TEST In this test, the checking for the communication network...
Page 46
42www.seuservice.com43www.seuservice.com 6 - 2 GAME TEST MODE Use GAME TEST MODE to check game settings and play data. (1)Use the SERVICE Button to move the cursor to the desired test item. (2)Press the TEST Button to enter the selected item. (3)After the test is complete, move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. VIRTUA STRIKER 2002 TEST MENU INPUT TEST OUTPUT TEST GAME ASSIGNMENTS...
Page 47
42www.seuservice.com43www.seuservice.com 6 - 2 - 1 INPUT TEST Select INPUT TEST to display the following screen and check the status of input devices. This test should be used periodically to check that each input device is functioning correctly. INPUT TEST 1P 2P UP OFF OFF DOWN OFF OFF RIGHT OFF OFF LEFT OFF OFF SHORT PASS OFF OFF LONG PASS OFF OFF SHOOT OFF OFF START OFF OFF SERVICE OFF TEST OFF...
Page 48
44www.seuservice.com45www.seuservice.com 6 - 2 - 2 OUTPUT TEST Use OUTPUT TEST to check the SEGA VERSUS CITY 7 SEGMENTS display and flash the billboard lamp. (1)Use the SERVICE Button to move the cursor to the desired test item. (2)Press the TEST Button to enter the selected item. (A) 1P SIDE CHECK Display the 7 segments on the 1P side and flash the billboard lamp. (B) 2P SIDE CHECK Display the 7 segments on the 2P side and flash the billboard lamp. (C) CLEAR CHECK Turn off 1P and 2P 7 segment...
Page 49
44www.seuservice.com45www.seuservice.com 6 - 2 - 3 GAME ASSIGNMENTS Select GAME ASSIGNMENTS to display the current game settings and make changes. Changes to settings are not enabled until Test Mode is exited. After changing settings, be sure to exit Test Mode. (1)Use the SERVICE Button to move the cursor to the desired item. (2)Press the TEST Button to enter the selected item. (3)Move the cursor to NEXT and press the TEST Button to enter the next GAME ASSIGNMENTS screen. (A) ADVERTISE SOUND(ON, OFF)...
Page 50
46www.seuservice.com47www.seuservice.com (B) GAME DIFFICULTY (VERY EASY, EASY, NORMAL, HARD, HARDEST) Set the level of game difficulty. (C) VIRTUAL TIME (REAL, 2 HOUR, 4 HOUR) Set the number of hours that pass in one game day. Internal game time will progress according to this setting and the graphics used in the game will progressively change from "DAYTIME"-"DUSK"-"NIGHT". Use "REAL" to set the internal game time to real time. (D) BILLBOARD (ON, OFF) Set whether to...