Home > Sega > Games > Sega Virtua Striker 2002 Kit Installation Service Manual

Sega Virtua Striker 2002 Kit Installation Service Manual

Here you can view all the pages of manual Sega Virtua Striker 2002 Kit Installation Service Manual. The Sega manuals for Games are available online for free. You can easily download all the documents as PDF.

Page 61

56www.seuservice.com57www.seuservice.com
7 - 3 REPLACING THE DIMM BOARD BATTERY PACK
   Do not disassemble the battery pack and the batteries.
      If you should fail to observe this instruction, the internal wires and/or 
protective devices may be damaged; as a result the safety system may not 
function when discharging and recharging, eventually causing an overheating, 
fire and explosion. If you should disassemble the batteries, the generated 
gases may harm your throat and the negative plate may...

Page 62

58www.seuservice.com59www.seuservice.com
   Do not tightly seal the battery pack when installing it onto an external device. 
      Flammable gas is generated from the battery when its safety mechanism has 
functioned. If you should fail to observe the above-described instruction, 
sparks from motors, switches, etc. may cause the gas to fire. Therefore, install 
the battery pack so that the gas can be quickly released from the external 
device.
   Do not use the battery pack for the device/usage other...

Page 63

58www.seuservice.com59www.seuservice.com
FIG. 7. 3
BATTERY COVER
BATTERY PACK
401-0076
When a GD-ROM readout time seems to be longer than before, the cause may be a reduction of 
DIMM board battery pack's charge. Usually, the DIMM board battery pack reaches its service 
life about 16 months after starting to use. 
Do not use a battery charger because any battery charger is not usable for this battery pack.
Instead, replace the battery pack with a new one as follows:
 Refer to "7-1...

Page 64

60www.seuservice.com61www.seuservice.com
7 - 4 KEY CHIP
KEY CHIP
DIMM BOARD CASE
KEY CHIP SLOT
TAB
FIG. 7. 4
   The key chip is a precision device. Handle it carefully because it may be dam-
aged by heat, shock, and static electricity.
   The key chip is contained in the GD-ROM disc case.
      Always use them as a set.
Installing the key chip
 Remove the key chip from the GD-ROM disc case.
 Insert  the  key  chip  vertically  into  the  slot  of  the  DIMM  board  case  for  TRIFORCE;  be  careful...

Page 65

60www.seuservice.com61www.seuservice.com
Handling the GD-ROM Disc
   Do not contaminate the discs with your fingerprints 
or dust particles. Contaminated discs may lower audio 
and video quality.
   When cleaning the discs, do not use volatile chemicals 
(benzine, thinner, etc.), cleaning sprays, and antistatic 
agents.
   Do not use cracked, warped, or damaged discs.
      Do not attach papers or seals onto the discs; do not 
scratch the discs.
      Do not use the discs with a sign of peeled seals,...

Page 66

62www.seuservice.com63www.seuservice.com
FIG. 7. 5
Installing the GD-ROM disc
 Remove the 1 truss head screw that fixes the GD-ROM drive lid (DISC LID). And turn 
clockwise the lid to remove.
 Take out the GD-ROM disc from its case, and set it onto the GD-ROM drive with a printed side 
facing you.
 Return the lid to its original place, and fix it with 1 truss head screw. Be careful not to fasten it 
too tightly.
Removing the GD-ROM disc
 Remove the 1 truss head screw that fixes the GD-ROM drive lid...

Page 67

62www.seuservice.com63www.seuservice.com
5080
5141505031
838-13616
AUDIOPOWERAMP2CH
JSTVH4P
TRANSFORMER
0V120V
0V17V0V17V
�
PC
WHITE(U/P)
132PC
560-5407
PC
JSTVL
+12V
GNDGNDGND
+3.3V+5V
GND
+5V
GND
400-5397
SWREGUFORJVS
600-6743-050
600-7141-050
JSTVL
+3.3V
PC
838-13683-91
3
2
1
30105050
120
VacInput
[Extra]
5kpot
SpeakerOutputs
ToPIN8
ofJamma
ToExtra
YellowWire
JAMMACONNECTIONSUSEDARE:
�VIDEOOUT
�SWITCHINPUTS
�SWITCHGROUNDRETURNS
�COINCOUNTEROUTPUT
NOTE:THEREARETOBENO
CONNECTIONSMADETOTHE...

Page 68

64www.seuservice.com
Notes: 

Page 69

Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment.  This certifies 
that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workman-
ship or materials under normal operating conditions.   This also certifies that all Interactive Control 
Assemblies are to be free from defects in workmanship and materials under normal operating con di-
tions.  No other product in this machine is hereby covered.
Sellers sole liability in the event a...

Page 70


				            
Start reading Sega Virtua Striker 2002 Kit Installation Service Manual

Related Manuals for Sega Virtua Striker 2002 Kit Installation Service Manual

All Sega manuals