Sanyo Projector Plv Z60 User Manual

31
Image Adjustment
COLOR MANAGEMENT LIST
Clear the check mark if
you do not want to apply
this adjusted color data
to the projected image. 
Select [Yes] to delete
the selected color data.
Select the DEL box if
you want to delete
the adjusted data. A
confirmation box
appears.
COLOR MANAGEMENT
COLOR MANAGEMENT LIST
Select Color management in the Advanced menu and then
press the OK or Point 
8buttons. The COLOR MANAGEMENT
LIST appears. You can store up to eight (8) color management
data in the list. 
In...

32
Image Adjustment
To store the adjusted data, select Store and press the Point 8or
OK buttons. The User Image Mode Menu appears. Use the Point
edbuttons to choose one of the four (4) user image modes and
press the OK or Point 
8buttons. A confirmation box appears.
Select [Yes] and then press the OK button.
To exit the User Image Mode Menu, go to the Quit icon and press
the OK or Point 
8buttons. The stored data can be called up by
selecting “User image 1 – 4” in the Image Mode Selection on
page 27....

33
1Press the Point edbuttons to select the Picture adj. Menu
and press the Point 
8or OK buttons to access the submenu
items. 
2Use the Point edbuttons to select the desired item and
press the Point 
8or OK  buttons to access the selected
item. The adjustment bar is displayed. 
Fine sync
Use the Point 7 8buttons to adjust the value, eliminating a flicker
from the image displayed (from 0 to +31).
Total dots
Use the Point 7 8buttons to adjust the number of total dots in
one horizontal period to match your...

34
This projector has the picture screen resize function which enables you \
to customize the image size.Press the Point 
edbuttons to select the Screen Menu and
press the Point 
8or OK buttons to access the submenu
items.
Use the Point 
edbuttons to select the desired screen size
and press the OK or Point 
8buttons. The selected item is
check marked. 
1
2
Screen Menu
Screen Size Adjustment
✔Note:
• The Screen Menu cannot be operated without an input signal.
Direct Operation
Press the SCREEN button on...

35
Screen
✔Notes:
• When the video signal format is 720p, 1080i, or HDTV, the Screen Menu ca\
nnot be
selected except for Full, Zoom, Caption in, and Natural wide 2.
• When Normal is selected with a computer input, the image is projected at\
 the
inputted resolution.
• This projector cannot display any resolution higher than 1920 x 1080. If\
 your
computer’s resolution is higher than that, lower the resolution befor\
e connecting to
the projector.
• The image data other than the 1280 x 720 resolution is...

36
Keystone
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean,
or Japanese.Setting Menu
When the image is distorted vertically, select Keystone and press
the Point 
8or OK buttons. The On-Screen Menu disappears and
the Keystone dialog box appears. Use the Point 
edbuttons to
correct keystone distortion.
Setting
Menu position
Menu position
This function is used to...

37
HDMI setup
Select L1 or L2 according to the output signal of video equipment.
Press the Point 
8or OK buttons to switch between each option.
1:L1 2:L1 . . . . . Set HDMI1 terminal to L1, HDMI2 to L1
1:L2 2:L1 . . . . . Set HDMI1 terminal to L2, HDMI2 to L1
1:L1 2:L2 . . . . . Set HDMI1 terminal to L1, HDMI2 to L2
1:L2 2:L2 . . . . . Set HDMI1 terminal to L2, HDMI2 to L2
L1  . . . . . When the output of video equipment is set to “STANDARD.”
L2  . . . . . When the output of video equipment is set to...

38
Setting
Power off confirmation
When this function is set to “On,” a confirmation dialog box with
“Power off?” is displayed when turning off the projector (p.19).\
Press the Point 
8or OK buttons to switch On/Off.  
Capture
This function enables you to capture an image being projected to
use it for the starting-up display or interval of presentations. 
Select Capture and press the Point 
8or OK buttons. The
confirmation box appears and select [Yes] to capture the projected
image. The captured image...

39
Two different remote control codes are assigned to this projector:
the factory-set code (Code 1) and the secondary code (Code 2).
This switching function prevents interference from other remote
controls when several projectors or video equipment next to each
other are used at the same time. 
When operating the projector in Code 2, the code for both the
projector and the remote control must be switched to Code 2.  
To change the code of the projector:
Press the Point 8or OK buttons to switch between...

40
Setting
This function resets the lamp replacement counter. When replacing
the projection lamp, reset the lamp replacement counter with this
function. See page 48 for operation. Lamp counter reset
Factory default
This function restores all setting values except for the user’s logo
and the lamp counter to the factory default settings.
Select [Yes] and press the
OK button, then another
confirmation box appears.
Factory default
Panel adjustment
This function is used to get the best picture reproduction of...