Sanyo Projector Plv Z60 User Manual

Multimedia Projector 
MODELPLV-Z60
Owner’s Manual 

2
Features and Design
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, and ease of use. It uses built-in
multimedia features, a palette of 1.07 billion colors, and matrix liquid\
 crystal display (LCD) technology.
◆Short Throw & Wide-Range Zoom Lens
The 2x Short Throw & Wide-Range Zoom Lens is capable
of throwing a 100” diagonal image from a distance of 9.8’
(3.0 m) to 20.0’ (6.1 m).
◆Lens Shift
The Lens Shift function provides a greater installation...

3
Table of Contents
TRADEMARKS
● Apple, Macintosh, and PowerBook are trademarks or registered trademarks \
of Apple Computer, Inc.
● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of Inter\
national Business Machines, Inc.
● Each name of corporations or products in this owner’s manual is eithe\
r a trademark or a registered trademark of its
respective corporation.
Features and Design  . . . . . . . . . . . . . . . . . . . 2
T able of Contents  . . . . . . . . . . . . . . . . . . . . . 3...

4
To the Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER’S MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
Before operating this projector,...

5
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during lightning storm, or
when it is left unattended and unused for long periods of time,
unplug...

6
Safety InstructionsMoving the Projector
When moving the projector, make sure that the automatic
slide shutter is closed, retract the adjustable feet, and lock the
lens with the Lens Shift Lock to prevent damage to the lens
and cabinet.
When the projector is unused for an extended period, put it
into a suitable case.
Care must be taken when handling the projector; do not drop,
bump, subject it to strong forces, or put other things on the
cabinet. 
20˚20˚Do not tilt the projector more than 20
degrees...

7
Compliance
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, th\
e value of which is indicated on the pin face of the pl ug. Should the
fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of \
the same rating, marked thus  . If the fuse cover is
detachable, never use the plug with the cover omitted. If a replacement \
fuse cover is required, ensure it is of the same colour  as that visible
on the pin face of the plug (i.e. red...

8
SERVICEPORTHDMI 1COMPUTERCOMPONENT 1
COMPONENT 2S-VIDEO
HDMI 2VIDEOPb/Cb
YPr/ Cr
Bottom Back
!2!3!4
!5Adjustable Feet
! 6Lamp Cover
! 7RGB Panel Cleaning Hole Cover
! 1
!6
!5 !
1Terminals and Connectors
! 2Power Cord Connector
! 3Main On/Off Switch
! 4Air Intake Vents/Air Filters
✽Kensington Security SlotThis slot is for a Kensington lock used to deter theft of
the projector.
*Kensington is a registered trademark of ACCO Brands Corporation.
q Exhaust VentFront
q
werytuo w
Top Controls and Indicators
e...

9
Part Names and Functions
qCOMPUTER
Connect the computer output signal, or RGB Scart 21-
pin video output to this connector (p.17).
Rear Terminal
SERVICEPORT
HDMI 1
COMPUTER
COMPONENT 1
COMPONENT 2
S-VIDEO
HDMI 2
VIDEOPb/Cb
YPr/ Cr
qw
t
e
y
VIDEO
Connect the composite video output signal from video
equipment to this jack (p.16).
eCOMPONENT 1 or COMPONENT 2
Connect the component video output signal to these
jacks (p.16).
wS-VIDEO
Connect the S-Video output signal from video equipment
to this jack...

10
Part Names and Functions
Top Control
qwer
tyui
i INPUT button
Select an input source (p.24).
tMENU button
Open or close the On-Screen Menu (p.20).
e WARNING indicator
–Lights red light when the projector detects an
abnormal condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.42, 50).
w
POWER indicator
–Lights red while the projector is in stand-by mode. 
– Lights green during operations. 
– Blinks red during the cooling-off period.
– Blinks green in...