Sanyo Projector PLV-Z2000 User Manual

1

D-y/C
Optimally separates the color and brightness signal to reduce 
cross-color and dot interference. Press the Point 7 8 buttons to 
change the 3D-Y/C mode.
 Off
  . . . .  3D-Y/C mode is “Off”
  On
  . . . .  3D-Y/C mode is “On”
Custom gamma
Adjust R, G, B to get the desired balance of contrast.
Select Custom gamma in the Advanced menu and press the 
Point 8 or OK buttons. The custom gamma window appears. Use 
the Point ed buttons to choose the desired item from Gamma 
R, Gamma G, and...

2

COLOR MANAGEMENT LIST
Clear the check mark if 
you do not want to apply 
this adjusted color data 
to the projected image. 
Select [Yes] to delete 
the selected color data.
Select the DEL box 
if you want to delete 
the adjusted data. 
A confirmation box 
appears.
COLOR MANAGEMENT
COLOR MANAGEMENT LIST
 Select Color management in the Advanced menu and then 
press the OK or Point 
8 buttons. The COLOR MANAGEMENT 
LIST appears. You can store up to eight (8) color management 
data in the list....



To store the adjusted data, select Store and press the Point 8 or 
OK buttons. The User Image Mode Menu appears. Use the Point 
ed buttons to choose one of the seven (7) user image modes 
and press the OK or Point 8 buttons. A confirmation box appears. 
Select [Yes] and then press the OK button.
To exit the User Image Mode Menu, go to the Quit icon and press 
the OK or Point 8 buttons. The stored data can be called up by 
selecting “User image 1 – 7” in the Image Mode Selection on 
page 27....

4

1Press the Point ed buttons to select the Picture adj. Menu 
and press the Point 8 or OK buttons to access the submenu 
items. 
2Use the Point ed buttons to select the desired item and 
press the Point 8 or OK  buttons to access the selected 
item. The adjustment bar is displayed. 
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a flicker 
from the image displayed (from 0 to +31).
Total dots
Use the Point 7 8 buttons to adjust the number of total dots in 
one horizontal...

5

This projector has the picture screen resize function which enables you to customize the image size.
Press the Point ed buttons to select the Screen Menu and 
press the Point 8 or OK buttons to access the submenu 
items.
Use the Point ed buttons to select the desired screen size 
and press the Point 8 or OK  buttons. The selected item is 
check marked. 
1
2
Screen Menu
Screen	Size	Adjustment
✔Note:
	 •	 The	Screen	Menu	cannot	be	operated	without	an	 input	signal.
	 •	 The	 Vertical	adj.	function...

6

✔Note:	
	 •	 When	the	video	signal	format	is	720p,	1080i,	or	 1080p,	the	Screen	Menu	cannot	be	selected	except	
for	Full,	Zoom,	Caption	in,	Normal	through	,	and	
Natural	wide	2.
	 •	 When	Normal	is	selected	with	a	computer	input,	the	 image	is	projected	at	the	inputted	resolution.
	 •	 This	projector	cannot	display	any	resolution	higher	 than	1920	x	1080.	If	your	computer’s	resolution	
is	higher	than	that,	lower	the	resolution	before	
connecting	to	the	projector.
	 •	 The	image	data	other	than...

7

The language used in the On-Screen Menu is available in English, 
German, French, Italian, Spanish, Portuguese, Dutch, Swedish, 
Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, or 
Japanese.
Setting
Setting Menu
Menu position
Menu position
This function is used to change the position of the On-Screen 
Menu. Select Menu position and press the Point 8 or OK buttons. 
The Menu position screen appears. Use the Point ed7 8 buttons 
to select the desired position and press the OK...

8

HDMI 1 setup/ HDMI 2 setup
Select Normal or Enhanced according to the output signal of video 
equipment. Press the Point 8 or OK buttons to switch between 
each option.
 Normal . . . . When the output of video equipment is set to 
“STANDARD.”
 Enhanced. . When the output of video equipment is set to 
“ENHANCED.”
The names for the output setting of video equipment vary from 
equipment to equipment. For details, refer to the owner’s manual 
of video equipment.
Background
Select the background...

9

Rename
This function is used to change the name of the Input or the User 
image. Select Rename and press the Point 8 or OK buttons. The 
Rename window appears. Use the Point ed buttons to choose 
either Input or User image and then press the Point 8 or OK 
buttons to display the rename item selection window.
Use the Point ed buttons to choose a desired item and press the 
Point 8 button to display on-screen keyboard.
✔Notes:
	 •	 Custom	is	blank	and	check	mark	cannot	be	placed	when	an	item	is...

40

Power off confirmation
When this function is set to “On,” a confirmation dialog box with 
“Power off?” is displayed when turning off the projector (p.19). 
Press the Point 8 or OK buttons to switch On/Off.  
Capture
This function enables you to capture an image being projected to 
use it for the starting-up display or interval of presentations. 
Select Capture and press the Point 8 or OK buttons. The 
confirmation box appears and select [Yes] to capture the projected 
image. The captured image will...