Home > Sanyo > Projector > Sanyo Projector Plv Z1 User Manual

Sanyo Projector Plv Z1 User Manual

Here you can view all the pages of manual Sanyo Projector Plv Z1 User Manual. The Sanyo manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 41

41
Computer Input
This projector has a picture screen resize function, which enables you to display the desirable image size.
When Digital zoom is selected, the on-screen menu disappears and the message “D.Zoom” is displayed.  Press the SELECT
button to expand the image.  And press the POINT UP/DOWN/LEFT/RIGHT button(s) to pan the image.  Panning function
can work only when the original image is larger than screen size (964 X 544).
Digital zoom
Provides an image at the normal video aspect ratio of 4 :...

Page 42

42
SETTING
Keystone
When the image is distorted vertically, select the Keystone.  The on-
screen menu disappears and the Keystone dialog box is displayed.
Correct keystone distortion by pressing the POINT UP/DOWN button.
Refer to Keystone Adjustment on page 21.
Language
Language is available in English, German, French, Italian, Spanish,
Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and
Japanese.
Display
This function decides whether to display On-Screen Displays.
On  ···shows all the On-Screen...

Page 43

43
Setting
This function turns the Projection lamp off when this projector detects
signal interruption and is not used for a certain period in order to
reduce power consumption and maintain the lamp lifetime.  (This
projector is shipped with this function ON.)  This function operates as
follows;
Power management
This function is used to reset the Lamp Replace Counter.  When replacing the Projection lamp, reset the Lamp Replace
Counter by using this function.  Refer to page 45 for operation.
Lamp counter...

Page 44

44
Appendix
Lamp Replacement
When the life of the projection lamp draws to an end, the LAMP
REPLACE indicator lights yellow.  When this indicator lights yellow,
replace the projection lamp with a new one promptly.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer.  When ordering a Projection Lamp, give the
following information to the dealer.

Model No. of your projector   : PLV-Z1 / PLV-Z1BL
Replacement Lamp Type No. : POA-LMP54
(Service Parts No. 610 302 5933)
FOR CONTINUED...

Page 45

45
Appendix
Lamp Replace Counter
Be sure to reset the Lamp Replace Counter after the Lamp assembly is replaced.  After the Lamp Replace Counter is reset,
the LAMP REPLACE indicator stops lighting.
NOTE : Do not reset the Lamp Replace Counter before the Projection lamp is replaced.
Turn on the projector and press the MENU button. The main
menu appears.  Select the Setting menu with the POINT
UP/DOWN button, and then press the POINT RIGHT button
to enter the sub-menu.
Choose the Lamp counter reset with the...

Page 46

46
Appendix
Cleaning the Projection Lens
Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth.  Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents or other harsh chemicals might scratch a surface.
When the projector is not in use, close the front cover.
1
3
Lightly wipe the Projection lens with a cleaning cloth.
2
Follow these steps to clean the projection lens.
Warning Temp. Indicator
The WARNING TEMP. indicator flashes red when an internal temperature of the...

Page 47

47
Appendix
Before calling your dealer or service center for assistance, check the following:
• Make sure you have connected the projector to video equipment or your computer as described on page 17 and 18.
• Check cable connection.  Verify that all  video, computer, and power cord are properly connected.
• Verify that all power is switched on.
• When you are operating the projector with a computer and it does not produce an image, restart the computer.  
• Select the other input source.
No power.Plug...

Page 48

48
Appendix
If the problem still persists after following all operating instructions,
contact the sales dealer where you purchased the
projector or the service center.Give the model number and explain the difficulty.  We will advise you how to obtain service.
LAMPThe projector is OFF.
READYThe projector is READY to be turned on.  
WARNING TEMP.
(page 46)
IndicatorProjector Condition
LAMP REPLACE
(page 44)
Indicators and Projector Condition
Check the Indicators for projector condition.
The projector is...

Page 49

49
Appendix
0.7 Wide TFT Active Matrix type, 3 panels
Multi-media Projector
7.5lbs (3.4 kg)
13.11 x 4.27 x 9.70 (333mm x 108.5mm x 246.5mm) (not including Adjustable Feet)
964 x 544 dots
1,573,248 (964 x 544 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N
H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz
Adjustable from 30” to 200”
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)
Owner’s Manual
AC Power Cord
Remote Control and Batteries
Video Cable 
Projector Type
Net Weight
Dimensions (W x H...

Page 50

50
Appendix
WARNINGTEMP.
LAMPLAMPREPLACE
READY
LAMPLAMP
MENUINPUT
ON-OFF
SELECT
Unit : inch (mm)
13.11 (333)
9.70 (246.5)
4.27 (108.5) 11.8˚ (Max.)
Dimensions 
Start reading Sanyo Projector Plv Z1 User Manual

Related Manuals for Sanyo Projector Plv Z1 User Manual

All Sanyo manuals