Sanyo Projector Plc Xw60 User Manual

Multimedia Projector
MODEL PLC-XW60
          PLC-XW60K
Owner's Manual 


Table of ContentsFeatures and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease 
of  use. This  projector  utilizes  built-in  multimedia  features,  a  palette  of  16.77  million  colors,  and  matrix  liquid 
crystal display (LCD) technology.
◆ Compact Design
  This 
projector  is  designed  compact  in  size  and 
weight.  It  is  easy  to  carry  and  work  anywhere 
you wish to use.
◆  Compatibility
  The 

projector widely...


Table of ContentsFeatures and Design
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its 
respective corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  . .
Table of Contents  .
  .  .  .  .  .  .  .  .  .  .  .  .  .  . .
To the Owner  .
  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions  .
  .  .  .  .  .  .  .  .  .  .  .  .  . .5
Air Circulation  6
Installing...

4
Safety InstructionsTo the Owner
B e f o r e  o p e r a t i n g  t h i s  p r o j e c t o r,  r e a d  t h i s  m a n u a l 
thoroughly and operate the projector properly.
This  projector  provides  many  convenient  features  and 
functions.  Operating the projector properly enables you to 
manage those features and maintains it in better condition 
for a considerable time.
Improper  operation  may  result  in  not  only  shortening  the 
product-life,  but  also  malfunctions,  fire  hazard,  or...

5
Safety Instructions
All  the  safety  and  operating  instructions  should  be  read 
before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them 
for  later  use.    Unplug  this  projector  from AC  power  supply 
before  cleaning.  Do  not  use  liquid  or  aerosol  cleaners.  
Use a damp cloth for cleaning.
F o l l o w  a l l  w a r n i n g s  a n d  i n s t r u c t i o n s  m a r k e d  o n  t h e 
projector.
For  added  protection  to  the  projector  during...

6
ComplianceSafety Instructions
Openings in the cabinet are provided for ventilation and to 
ensure  reliable  operation  of  the  product  and  to  protect  it 
from overheating, and these openings must not be blocked 
or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent.  When using 
or  installing  the  projector,  the  following  precautions 
should be taken. 
–
 Do  not  put  any  flammable  object  or  spray  can  near 
the  projector,  hot  air  is  exhausted  from  the  ventilation...

7
ComplianceSafety Instructions
Federal Communications Commission NoticeNote:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,  pursuant  to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed 
and  used  in  accordance  with  the  instructions,  may...

8
Part Names and FunctionsPart Names and Functions
qtyerw
Front
Bottom
q Speaker
w Infrared Remote Receiver
e Focus Lever
r Lens 
t Zoom Lever
y	Lens Cover
  (See page 58 for attaching.)
    
CAUTION
 
Do  not  turn  on  a  projector  with  lens  cap 
attached.  High  temperature  from  light  beam 
m a y  d a m a g e  l e n s  c a p  a n d  r e s u l t  i n  f i r e 
hazard.
u  Air Intake Vent (front and bottom)
i Power Cord Connector
o Exhaust Vent
 
CAUTION
Hot air is exhausted from the exhaust vent....


Part Names and FunctionsPart Names and Functions
Rear Terminal
e COMPUTER IN  / MONITOR OUT
  This  terminal  is  switchable  and  can  be  used  for 
input  from  a  computer  or  output  the  incoming 
R G B  a n a l o g  s i g n a l  f r o m  C O M P U T E R  I N 1 
/S-VIDEO IN / COMPONENT  IN terminal to the 
other monitor.
  S

et  the  terminal  up  as  either  Computer  input 
or  Monitor  output  properly.  (Used  for  Monitor 
out,  this  terminal  outputs  only  incoming  RGB 
signal...

10
Top Control
y LAMP REPLACE indicator
  T
urn  yellow  when  the  life  of  the  projection  lamp 
draws to an end. (p.60, 69)
t	WARNING indicator
  E m i t  a  r e d  l i g h t  w h e n  t h e  p r o j e c t o r  d e t e c t s 
an  abnormal  condition.    This  also  blinks  red 
when  the  internal  temperature  of  the  projector 
exceeds the operating range. (p.57, 69)
r POWER ON/STAND-By  button
  Turn the projector on or off. (p.18, 20)
o POWER indicator
  –
 Lights  red  when  the  projector  is...