Sanyo Projector Plc Xu88 User Manual

1

Computer InputComputer Input
The Auto PC Adjustment 
function operates to adjust 
the projector. 
PC System Menu
The PC System Menu icon 
 Selected system is    
  displayed.
Systems in this dialog box 
can be selected.
PC System Menu
Customized Mode (1–5) set in 
the PC Adjust Menu (pp.33–34).
Computer System Selection
This projector automatically tunes to various types of computers based o\
n VGA, SVGA, XGA, SXGA, WXGA, 
or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer...



Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical 
positions to conform to your computer.
Move the red frame pointer 
to Auto PC Adj. and press 
the SELECT button.
“Please wait...” appears 
while the Auto PC 
adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
Auto PC Adjustment
Remote Control
AUTO PC button
The Auto PC adjustment function can be operated directly 
by pressing the AUTO PC button on the...



Computer InputComputer Input
PC Adjust Menu
Manual PC Adjustment
Some  computers  employ  special  signal  formats  which  may  not  be  tuned  by  Multi-scan  system  of  this  projector.  
Manual  PC Adjustment  enables  you  to  precisely  adjust  several  parameters  to  match  those  signal  formats.  The 
projector  has  five  independent  memory  areas  to  store  those  parameters  manually  adjusted.  It  allows  you  to 
recall the setting for a specific computer. 
Press  the  MENU...



Computer Input
VacantValues  of  “Total  dots”, 
“Horizontal”, “Vertical”, 
“Display area H”, and 
“Display area V”.
Close this dialog box.
To store adjusted data
To clear adjusted dataThis Mode has stored 
parameters.
Move  the  red  frame  pointer 
t o   t h e   d e s i r e d   i t e m   a n d 
press the SELECT button.
Use  the  Point ◄►  buttons  to  adjust  the  horizontal  area 
displayed by this projector.
Display area H
Use  the  Point ◄►  buttons  to  adjust  the  vertical  area...

5

Computer InputComputer Input
Move the red frame pointer to 
the desired image mode and 
press the SELECT button.
The selected image mode is check marked.
Image Select Menu
Normal picture mode preset on the projector.
Standard
Picture mode with improved halftone for graphics.
Real
For  the  image  projected  on  a  blackboard.  See  above  for 
further description.
Blackboard(Green)
Image Select Menu icon
IMAGE button
Dynamic
Real
Image 1
Image 
Image 
Image Mode Selection 
Image ...

6

Computer Input
Use the Point ◄► buttons 
to adjust the setting value.
M o v e   t h e   r e d   f r a m e 
pointer  to  the  desired 
item  and  then  press 
the SELECT button.
Image Adjust Menu
Image Adjust Menu icon
Selected Image mode
Image Adjustment
Reset
Press  the  MENU  button  to  display  the  On-Screen 
Menu.  Use  the  Point ◄►  buttons  to  move  the  red 
frame pointer to the Image Adjust Menu icon.
1
Use  the  Point ▲▼  buttons  to  move  the  red  frame 
pointer to the...

7

Computer InputComputer Input
Store
Exit the Image Adjust Menu.
Quit
Store icon
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Screen Menu
Screen Size Adjustment
Provide the image to fit the screen size.
Normal
True
Provide  the  image  in  its  original  size.  When  the  original 
image  size  is  larger  than  the  screen  size  (1024  x  768),  the 
projector enters to the panning mode automatically. Use the 
Point ▲▼◄►buttons  to  pan...

8

Computer Input
Select Digital zoom +. The On-Screen Menu disappears and 
“D.  zoom  +”  appears.  Press  the  SELECT  button  to  expand 
the  image  size.  Use  the  Point ▲▼◄►  buttons  to  pan  the 
image. The  Panning  function  can  work  only  when  the  image 
is larger than the screen size.
A  projected  image  can  be  also  expanded  by  pressing  the 
D.ZOOM ▲ button on the remote control. 
To exit the Digital zoom +/– mode, press any button except 
the D.ZOOM ▲▼ buttons, SELECT, and...

9

Computer Input
Choose  Video  by  pressing  the  INPUT  button  on  the  top 
control or the VIDEO button on the remote control.
Before  using  these  buttons,  correct  input  source  should  be 
selected through menu operation as described below.
Use  the  Point▲▼  buttons  to  move  the  red  arrow 
pointer  to  Video  and  then  press  the  SELECT  button  to 
display the Source Select Menu.
1

Move  the  pointer  to 
Video  and  press  the 
SELECT button.
VIDEO
Move  the  pointer  to...

0

Video Input
Choose  Computer  2  by  pressing  the  INPUT  button  on  the 
top  control  or  press  the  COMPUTER  button  on  the  remote 
control.
Before  using  these  buttons,  correct  input  source  should  be 
selected through Menu operation as described below.
1
Computer 
Input Menu
Use  the  Point ▲▼  buttons  to  move  the  red  arrow 
pointer  to  Computer  2  and  then  press  the  SELECT 
button.  

After the Source Select Menu appeared for Computer 
2, move the pointer...