Sanyo Projector Plc Xu84 User Manual
Here you can view all the pages of manual Sanyo Projector Plc Xu84 User Manual. The Sanyo manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61
Check the indicators for projector condition.
• • • green.• • • red• • • off
• • • blinks green.
When the projection lamp reaches its end of life, the LAMP REPLACE indic\
ator lights yellow. When this indicator
lights yellow, replace the projection lamp with a new one promptly. Rese\
t the lamp replacement counter after
replacing the lamp. See pages 58-59.
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the POWER ON-OFF
button to turn on the...](http://img.usermanuals.tech/thumb/67/96077/w300_sanyo-plc-xu84-manual_d-60.png "Page 61
61
Check the indicators for projector condition.
• • • green.• • • red• • • off
• • • blinks green.
When the projection lamp reaches its end of life, the LAMP REPLACE indic\
ator lights yellow. When this indicator
lights yellow, replace the projection lamp with a new one promptly. Rese\
t the lamp replacement counter after
replacing the lamp. See pages 58-59.
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the POWER ON-OFF
button to turn on the...")
61 Check the indicators for projector condition. • • • green.• • • red• • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indic\ ator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Rese\ t the lamp replacement counter after replacing the lamp. See pages 58-59. The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the POWER ON-OFF button to turn on the...
Page 62
![Page 62
62
AppendixTroubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
–Make sure you have properly connected the projector to peripheral equipm\
ent as described on pages 17–19.
– Make sure all equipment is connected to AC outlet and the power is turne\
d on.
– When the projector does not project an image from the connected computer\
, restart the computer.
Problem: –Solutions
No power –Plug the power cord of the projector into the AC outlet.
– See...](http://img.usermanuals.tech/thumb/67/96077/w300_sanyo-plc-xu84-manual_d-61.png "Page 62
62
AppendixTroubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
–Make sure you have properly connected the projector to peripheral equipm\
ent as described on pages 17–19.
– Make sure all equipment is connected to AC outlet and the power is turne\
d on.
– When the projector does not project an image from the connected computer\
, restart the computer.
Problem: –Solutions
No power –Plug the power cord of the projector into the AC outlet.
– See...")
62 AppendixTroubleshooting Before calling your dealer or service center for assistance, check the i\ tems below once again. –Make sure you have properly connected the projector to peripheral equipm\ ent as described on pages 17–19. – Make sure all equipment is connected to AC outlet and the power is turne\ d on. – When the projector does not project an image from the connected computer\ , restart the computer. Problem: –Solutions No power –Plug the power cord of the projector into the AC outlet. – See...
Page 63
![Page 63
63
Appendix
Some displays are not seen–Check the Display function. See page 46.
during the operation.
PIN code dialog box appears –PIN code lock is being set. Enter a PIN code (the “1234” or numbe\
rs
at start-up. you have set). See pages 21, 52–53.
Computer 2 cannot be selected.–Select Computer 2 at the Terminal function. (See page 49.)
The Terminal function cannot –The Terminal function cannot be selected after Computer 2 is
be selected. selected. Select other input source such as Computer 1 or...](http://img.usermanuals.tech/thumb/67/96077/w300_sanyo-plc-xu84-manual_d-62.png "Page 63
63
Appendix
Some displays are not seen–Check the Display function. See page 46.
during the operation.
PIN code dialog box appears –PIN code lock is being set. Enter a PIN code (the “1234” or numbe\
rs
at start-up. you have set). See pages 21, 52–53.
Computer 2 cannot be selected.–Select Computer 2 at the Terminal function. (See page 49.)
The Terminal function cannot –The Terminal function cannot be selected after Computer 2 is
be selected. selected. Select other input source such as Computer 1 or...")
63 Appendix Some displays are not seen–Check the Display function. See page 46. during the operation. PIN code dialog box appears –PIN code lock is being set. Enter a PIN code (the “1234” or numbe\ rs at start-up. you have set). See pages 21, 52–53. Computer 2 cannot be selected.–Select Computer 2 at the Terminal function. (See page 49.) The Terminal function cannot –The Terminal function cannot be selected after Computer 2 is be selected. selected. Select other input source such as Computer 1 or...
Page 64
64 AppendixMenu Tree SVGA 1Mode 1Mode 2- - - - Auto PC Adj. Total dotsHorizontalVertical Display area HDisplay area VReset Dynamic RealBlackboard (Green)Image 1Image 2Image 3 Image AdjustContrastBrightnessColor temp. Red Gamma Store Quit NormalTrueWide Digital zoom – Full screen 0–630–63 Computer Input PC Adjust Mode 1Mode 2Mode 3Mode 4Mode 5 Image Select High 0–63 0–15 Image 1Image 2Image 3Image 4 Screen Quit Yes/No ✽Systems displayed in the System Menu vary depending on an input signal. ResetYes/No...
Page 65
65 Appendix AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N Video Input Auto1080i1035i720p575p480p575i480i Dynamic CinemaBlackboard (Green)Image 1Image 2Image 3 Quit NormalWide 0–630–63 Off Setting Image Select System (2) System (3) Image AdjustContrastBrightnessColorTint RedGreenBlueSharpness ResetStore Gamma Progressive 0–630–630–630–15 0–15 Image 1 Screen Yes/No Quit Image 4 LanguageSetting16 languages provided. On/OffOn/Countdown off/Off Logo select On/OffOn/Off Off On/OffNormal/Auto/Eco Code 1–Code 8...
Page 66
![Page 66
66
AppendixCompatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned
below and less than 140 MHz of Dot Clock for analog signal and 110 MHz o\
f Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...](http://img.usermanuals.tech/thumb/67/96077/w300_sanyo-plc-xu84-manual_d-65.png "Page 66
66
AppendixCompatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned
below and less than 140 MHz of Dot Clock for analog signal and 110 MHz o\
f Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...")
66 AppendixCompatible Computer Specifications Basically this projector can accept the signal from all computers with t\ he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 110 MHz o\ f Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz) VGA 1640 x 48031.4759.88 VGA 2720 x 40031.4770.09 VGA 3640 x 40031.4770.09 VGA 4640 x 48037.8674.38 VGA 5640 x 48037.8672.81 VGA 6640 x...
Page 67
67 Appendix ON-SCREENDISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz) D-VGA640 x 48031.4759.94 D-480p640 x 48031.4759.88 D-575p768 x 57531.2550.00 D-SVGA800 x 60037.87960.32 D-WXGA 11366 x 76848.3660.00 ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz) D-720p1280 x 72045.0060.00 D-1035i1920 x 1035 D-1080i1920 x 1080 D-1080i1920 x 1080 33.7560.00 (Interlace) 33.7560.00 (Interlace) 28.12550.00 (Interlace) D-XGA1024 x 76843.36360.00 D-WXGA 21360 x 76847.760.00 D-WXGA 31376 x 76848.3660.00 When the input signal...
Page 68
68 AppendixTechnical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 9.66 x 2.28 x.6.82 (294.5mm x 69.5mm x 208 mm) (Not including adjustable feet) Net Weight 5.7 lbs (2.6 kg) Feet Adjustment 0˚ to 10.0˚ Panel Resolution LCD Panel System 0.63” TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 768 dots Number of Pixels 2,359,296 (1,024 x 768 x 3 panels) Signal Compatibility Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N High...
Page 69
![Page 69
69
Appendix
Model No.
COMPONENT-VGA Cable : POA-CA-COMPVGA
SCART-VGA Cable : POA-CA-SCART
VGA-Cable (10 m) : KA-MC-DB10
Ceiling Hanger :POA-CHS-US01 (for low ceiling)
POA-CHL-UL01 (for high ceiling)
POA-CHS-US02 (for low ceiling)
POA-CHL-UL02 (for high ceiling)
POA-CHB-XU70
USB Memory :POA-USB02
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model
No. to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide...](http://img.usermanuals.tech/thumb/67/96077/w300_sanyo-plc-xu84-manual_d-68.png "Page 69
69
Appendix
Model No.
COMPONENT-VGA Cable : POA-CA-COMPVGA
SCART-VGA Cable : POA-CA-SCART
VGA-Cable (10 m) : KA-MC-DB10
Ceiling Hanger :POA-CHS-US01 (for low ceiling)
POA-CHL-UL01 (for high ceiling)
POA-CHS-US02 (for low ceiling)
POA-CHL-UL02 (for high ceiling)
POA-CHB-XU70
USB Memory :POA-USB02
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model
No. to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide...")
69 Appendix Model No. COMPONENT-VGA Cable : POA-CA-COMPVGA SCART-VGA Cable : POA-CA-SCART VGA-Cable (10 m) : KA-MC-DB10 Ceiling Hanger :POA-CHS-US01 (for low ceiling) POA-CHL-UL01 (for high ceiling) POA-CHS-US02 (for low ceiling) POA-CHL-UL02 (for high ceiling) POA-CHB-XU70 USB Memory :POA-USB02 The parts listed below are optionally available. When ordering those par\ ts, specify the item name and Model No. to the sales dealer. Optional Parts Accessories Owner’s Manual (CD-ROM) Quick Reference Guide...
Page 70
![Page 70
70
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japa\
n Business Machine and Information
System Industries Association). This projector supports all commands de\
fined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network S\
et-up and Operation.”
Projector Input
RGB
Computer1 (Analog)
RGB (AV HDCP)
RGB (PC digital)
Component
RGB (Scart)
Auto
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1...](http://img.usermanuals.tech/thumb/67/96077/w300_sanyo-plc-xu84-manual_d-69.png "Page 70
70
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japa\
n Business Machine and Information
System Industries Association). This projector supports all commands de\
fined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network S\
et-up and Operation.”
Projector Input
RGB
Computer1 (Analog)
RGB (AV HDCP)
RGB (PC digital)
Component
RGB (Scart)
Auto
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1...")
70 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japa\ n Business Machine and Information System Industries Association). This projector supports all commands de\ fined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see page 49 on the owner’s manual “Network S\ et-up and Operation.” Projector Input RGB Computer1 (Analog) RGB (AV HDCP) RGB (PC digital) Component RGB (Scart) Auto PJLink Input RGB 2 RGB 1 DIGITAL 2 DIGITAL 1...