Sanyo Projector Plc Xu84 User Manual

Multimedia Projector 
MODELPLC-XU87
PLC-XU84
Owner’s Manual
Network Supported
❏Wireless LAN
IEEE802.11b/g
❏ Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏USB Memory Viewer (optionally available)
Compatible with a dedicated USB memory
✽ Refer to the owner’s manuals below for details about
network and memory viewer function. ■ Network Set-up and Operation
■ Owners Manual  USB Memory 
This manual is provided with optionally supplied
USB memory. 

2
Features and Design
◆Compact Design
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to
use.
◆Compatibility
The projector widely accepts various video and
computer input signals including; Computers, 6 Color
systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M,
PAL-N), Component video, S-video and RGB scart.
◆Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly (p.30). Up to
UXGA...

3
Table of Contents
Tr ademarks
Each name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective
corporation.
Features and Design  . . . . . . . . . . . . . . . . . . .2
T able of Contents  . . . . . . . . . . . . . . . . . . . . . .3
To  the Owner  . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . . . . .5
Air Circulation 6
Moving the Projector 6
Installing the Projector in Proper Directions 7...

To the Owner
4
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
Before installing and operating...

5
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time,...

6
Safety Instructions
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered. 
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken. 
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any...

7
Safety Instructions
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in
severe accident or fire hazard.
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
Positioning Precautions
Do not tilt the projector more than 20 degrees from side to side. 
Do not point the projector up to project an image. 
Do not point the projector down to project an image. 
Do not put the projector on...

AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, th\
e value of which is indicated on the pin face of the
plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse\
 must be used of the same rating, marked thus
. If the fuse cover is detachable, never use the plug with the cover omi\
tted. If a replacement fuse cover is required,
ensure it is of the same colour as that visible on the pin face of the p\
lug (i.e. red or orange)....

9
✽Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO Brands 
Corporation.
Bottom Back
q USB Terminal
w LAN Connection Terminal
e Zoom Lever
r Projection Lens
t Focus Ring
y Lens Cover
(See page 60 for attaching.)
u Infrared Remote Receiver
i Top Controls and Indicators
o Speaker
! 0Air Intake Vent
! 1Power Cord Connector
! 2Terminals and Connectors
! 3Lamp Cover
! 4Air Intake Vents (back and bottom)
! 5Filters...

10
Part Names and Functions
Rear Terminal / Side Terminal 
S-VIDEO IN  COMPUTER / COMPONENTAUDIO  IN
R
VIDEO INL(MONO)
(VARIABLE)
AUDIO  OUT
COMPUTER  IN  1DVI-IUSBSERVICE PORT MONITOR  OUT
COMPUTER IN 2 
/ COMPONENT IN
qwerty
i
u
t  S-VIDEO IN
Connect the S-VIDEO output from video
equipment to this jack.  (p.18)
y AUDIO IN Connect the audio output from video equipment
connected to  tor o to this jack. (When the audio
output is monaural, connect it to L (MONO) jack.)
(p.18)
i COMPUTER/ COMPONENT AUDIO IN...