Sanyo Projector Plc Xu21n User Manual

11
CONNECTING THE PROJECTOR
CONNECTING TO THE VIDEO EQUIPMENT
S-VIDEO
R-AUDIO-L(MONO)VIDEOAUDIO
IN
OUT
CONTROL PORT
COMPUTER IN
MONITOR OUT
Video Source (example)
Video Cassette Recorder Video Disc Player
Video Audio Cable ✽S-VIDEO Cable ✽
Audio Amplifier Audio Speaker
(stereo) External Audio Equipment
Audio Cable (Stereo) ✽
Terminals 
of the Projector
Use the either of VIDEO
jack or S-VIDEO jack.
When the both jacks are
connected, the S-VIDEO
jack has priority over the
VIDEO jack. Video / Audio Output...

12
CONNECTING THE PROJECTOR
ON
12
34
56DIP
CONNECTING TO THE COMPUTER
To connect with the computer, refer to the figure below.
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
VGA Cable 
Monitor Output  Desktop type
Laptop type
Monitor
Audio Speaker
(stereo)
Audio Amplifier
Control Cable for Serial Port ✽
Control Cable for PS/2 Port Audio Cable (stereo) 
✽
Monitor Cable ✽
Terminal Terminal Serial port PS/2 port Audio Output Audio InputTo each terminal of your computer
To the...

13
CONNECTING THE PROJECTOR
S-VIDEO
R-AUDIO-L(MONO)VIDEOAUDIO
IN
OUT
CONTROL PORT
COMPUTER IN
MONITOR OUT
ON
1DIPON
OFF
23456
13 MODE (640 x 480)
16 MODE (832 x 624)
19 MODE (1024 x 768)OFF ON ON
ON ON
ON ONOFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
1234 56
OFF OFF ON ON ON ON 21 MODE (1152 x 870)
CONTROL
PORTAUDIO
OUT AUDIO
IN MONITOR
OUT COMPUTER
IN
Use one of these Control
Cables corresponding
with the terminal of your
computer.Set the switches as shown
in the table below depend-
ing on the...

14
BEFORE OPERATION
OPERATION OF THE REMOTE CONTROL
VOLUME
ON-OFF
FOCUS
ZOOMVIDEO
COMPUTER
D.ZOOM
MENUMUTE
LASER
KEYSTONENO SHOWFREEZE
AUTO IMAGENORMAL
LOCK
Used to select COMPUTER
output source.  (P22)
Used to select VIDEO source.
(P29)
Used to execute the item
selected or to expand the
image in DIGITAL ZOOM
mode. (P28)
It is also used as a PC mouse
in Wireless Mouse Operation.
(P32)
POWER ON-OFF BUTTON
Used to turn the projector on
or off.  (P19)
MENU BUTTON
Used to call MENU
operation.  (P17, 18)...

15
BEFORE OPERATION
VOLUME
ON-OFF
FOCUS
ZOOMVIDEO
COMPUTER
D.ZOOM
MENUMUTE
LASER
KEYSTONENO SHOWFREEZE
AUTO IMAGENORMAL
LOCK
To insure safe operation, please observe the following precautions :
Use (2) AA, UM3 or R06 type alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the Remote Control Unit to moisture, or heat.
Do not drop the remote control unit.
If batteries have leaked on the remote...

ZOOM FOCUS VOLUME
MENU MODE
SELECT
AUTO IMAGENORMAL ON–OFF
LAMP
READY
WARNING
TEMP.
LAMP
REPLACE
16
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to select zoom adjust.
(P20)
Used to open or close the
MENU operation. 
(P17, 18)
MENU BUTTON
MODE BUTTON
AUTO IMAGE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
FOCUS BUTTONS
NORMAL BUTTON
VOLUME BUTTONS
WARNING TEMP. INDICATOR
LAMP INDICATOR
POINT BUTTONS
LAMP REPLACE INDICATOR
Used to select input source
either Computer or Video.
(P22, 29)...

17
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU
Display ON-SCREEN MENU
Press MENU button to display the ON-SCREEN MENU
(MENU BAR).  The red frame is the POINTER.
Select the ITEM by pressing SELECT button.  The
dialog box of the ITEM appears.
Move the POINTER (red frame) to the ITEM ICON that
you want to select by pressing POINT RIGHT/ LEFT
buttons.
Move the POINTER to the ITEM that you want to adjust
and adjust the ITEM by pressing SELECT button.
Refer to the following pages for...

18
BEFORE OPERATION
MENU BAR
SYSTEM MENU
Used to select a
computer
system.
(Refer to P22)
IMAGE MENU
Used to adjust  the
computer image. [Fine
sync. / Total dots /
White Balance /
Contrast / Brightness]
(Refer to P26)
PC ADJUST MENU
Used to adjust the
parameters to
match with the input
signal format.
(Refer to P24, 25)
SETTING MENU
Used to set the Display
Menu and to reset
Lamp Replacement
Monitor Timer.
(Refer to P31)
MODE MENU
Used to select
the  Computer
input mode.
(Refer to P22)
POSITION MENU
Used...

19
BASIC OPERATIONS
TURNING OF THE PROJECTOR
Connect the projectors AC power cord into a wall outlet.  The
LAMP indicator lights RED, and the READY indicator lights
GREEN.
Press the power ON-OFF button on the Remote Control Unit or
on  the Top Control to ON.  The LAMP POWER indicator dims,
and the Cooling Fans start to operate.  The Preparation Display
appears on the screen and the count-down starts.  The signal
from the source appears after 30 seconds.
2
3
TURNING OFF THE PROJECTOR
Press the power...

20
BASIC OPERATION
The message disappears after 4 seconds.
The message disappears after 4 seconds.
KEYSTONE ADJUSTMENT
1Press the  KEYSTONE /button on the Remote Control Unit
or select the Keystone on the SCREEN menu.  (Refer to page
28, 29.)  The message “Keystone” is displayed.
2Correct the Keystone distortion by pressing the KEYSTONE
/button or the POINT UP/DOWN button(s).  Press the
KEYSTONE button or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE button or...