Sanyo Projector Plc Xu116 User Manual

1

wARNING :
High voltages are used to operate this projector  . Do not attempt to open the cabinet .
If problems still persist after following all operating instructions, contact the dealer where you purchased the 
projector or the service center. Specify the model number and explain about the problem. We will advise you 
how to obtain service.
This symbol on the nameplate 
means the product is Listed 
by Underwriters Laboratories 
Inc. It is designed and 
manufactured to meet rigid 
U.L. safety...



Appendix
Menu Tree
SVGA 1Mode 1Mode 2 - - - -
Total dotsHorizontalVertical
Display area HDisplay area VReset
Dynamic
RealBlackboard (Green)
Image 1Image 2Image 3
Image AdjustContrastBrightnessColor temp.
Red
Gamma
Store
0–630–63
PC adjust
Mode 1Mode 2Mode 3Mode 4Mode 5
Image Select
0–63
0–15
Image 1Image 2Image 3Image 4
Yes/No
 * Systems displayed in the System Menu vary depending on an input signal.
ResetYes/No
Sharpness0–15
Computer Input/Video Input
Sound
VolumeMuteOn/OffSound0-63...

3

Appendix
AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard (Green)
Image 1Image 2Image 3
0–630–63
Off
Setting
Image Select
System (2)
System (3)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15 0–15
Image 1Yes/No
Image 4
LanguageSetting17 languages provided.
Blue/User/BlackOn/Countdown off/Off Logo select
On/OffOn/Off
On/Off
Code 1–Code 8
BackgroundDisplayLogo
CeilingRear
On...

4

Check the indicators for projector condition.                                   
• • • green• • • red• • • off
• • • blinks green
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this 
   indicator lights yellow, replace the projection lamp with a new one promptly.
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button 
to turn on the projector.
Projector Condition
POWERred/green...

5

Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below 
and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.
  When selecting these modes, PC adjustment can be limited.
When the input signal is Analog , refer to the chart below.
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
VGA 1640 x 48031.4759.88...

6

Appendix
Note:
• The specifications are subject to change without notice.
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-VGA640 x 48031.4759.94
D-480p640 x 48031.4759.88
D-575p768 x 57531.2550.00
D-SVGA800 x 60037.87960.32
D-WXGA 11366 x 76848.3660.00
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-720p1280 x 72037.5050.00
D-1035i1920 x 1035
D-1080i1920 x 1080
D-1080i1920 x 1080
33.7560.00(Interlace)
33.7560.00(Interlace)
28.12550.00(Interlace)
D-XGA1024 x 76843.36360.00
D-WXGA...



Appendix
Technical Specifications
Mechanical Information  
 Projector Type  Multi-media Projector 
 Dimensions (W x H x D)                                   13.16" x 3.09" x 10.14" (3 34.2 x 78.4 x 257.5mm)  (Not including protrusions) 
 Net Weight  7.7 lbs (3.5 kg) 
 Feet Adjustment  0˚ to 8.9˚           
              
Panel Resolution  
 LCD Panel System  0.8" TFT Active Matrix type, 3 panels  
 Panel Resolution  1,024 x 768 dots
   Number of Pixels...

8

Appendix
     Model No.
COMPONENT~VGA Cable     : POA-CA-COMPVGA 
SCART~VGA Cable    : POA-CA-SCART
VGA-Cable (10 m)   : KA-MC-DB10
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
Accessories
 Owner’s Manual (CD-ROM)
   Quick Reference Guide 
   Safety Manual 
 AC Power Cord 
 Remote Control and Batteries                     
 VGA Cable
 Lens Cap with String  
 PIN Code Label 
 Network...

9

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified 
conformance with PJLink Standard Class 1.
For PJ Link password, see page 53 on the owner’s manual of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
Pj Link Notice
Appendix
Projector Input
RGB
Computer 2 (Analog)...

80

Vcc
- Data
+ Data
Ground
1

3
4
2
3 4
1�
COMPUTER IN 1/COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red (R/Cr) Input/Output   
Ground (Horiz.sync.)
Green (G/Y) Input/Output
-----
Blue (B/Cb) Input/Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5

4
3
6

8
+5V Power/-----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data/-----
Ground/-----
Vert. sync.
DDC Clock/-----
9
13
10...