Sanyo Projector Plc Xu116 User Manual

1

The preparation display will disappear 
after 30 seconds.
(See page 57 for Lamp control status.)
Turning On the Projector
Connect the projector’s AC power cord into an AC 
outlet. The POWER indicator lights red. Open the lens 
cap (see pages 9, 65).
Press the ON/STAND-BY button on the top control or 
on the remote control. The POWER indicator lights 
green and the cooling fans start to operate. The 
preparation display appears on the screen and the 
count down starts. 

3
1
4After the...



what is PIN code?
PIN (Personal Identification Number) code is a security 
code that allows the person who knows it to operate the 
projector. Setting a PIN code prevents unauthorized use of 
the projector.
A PIN code consists of a four-digit number. Refer to the PIN 
code lock function in the Setting Menu on pages 58-59 for 
locking operation of the projector with your PIN code.
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the 
Point ► button to fix the number and move...

3

TO MAINTAIN THE LIFE OF THE LAMP, ONCE 
YOU TURN THE PROJECTOR ON, WAIT AT 
LEAST FIVE MINUTES BEFORE TURNING IT 
OFF.
Power off? disappears after 4 seconds.
Turning Off the Projector
Press the ON/STAND-BY button on the top control or 
on the remote control, and Power off? appears on the 
screen.
Press the ON/STAND-BY button again to turn off the 
projector. The POWER indicator starts to blink red, and 
the cooling fans keep running (You can select the level 
of fans’ quietness and speed. See...

4

Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen 
Menu. The menus have a hierarchical structure, with 
a main menu that is divided into submenus, which are 
further divided into other submenus. For each adjustment 
and setting procedure, refer to respective sections in this 
manual.
Use the Point ▲▼ buttons to highlight or select a main 
menu item. Press the Point ► or the SELECT button 
to access the submenu items. (The selected item is...

5

Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 72-73.
Basic Operation








Main MenuSub-Menu


 Image select
 For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), 
Colorboard and image 1 - 4 (p.37). 
      For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) , 
Colorboard and Image 1- 4 (p.44).
 Image adjust
 For computer source, used to adjust computer image...

6

Basic Operation
Rotate the Zoom  Lever to zoom in and out.  
Rotate the Focus Ring to adjust the focus of the image.  
Zoom and Focus Adjustment
Remote Control
Auto setup function is provided to automatically execute 
the setting of Auto setup (includes Input search, Auto PC 
adj. and Auto Keystone functions) in the setting menu by 
just pressing the AUTO SETUP/CANCEL button on the top 
control or the AUTO SET/CANCEL button on the remote 
control. Refer to page 49 for the setting of the Auto...



Keystone Correction
Remote Control
Top Control
AUTO SET/CANCEL button
POINT ▲▼◄► buttons
KEySTONE button
POINT ▲▼buttons
AUTO SETUP/CANCEL button
Basic Operation
If a projected picture still has keystone distortion after 
pressing the AUTO SETUP/CANCEL button on the top 
control or the AUTO SET/CANCEL button on the remote 
control, correct the image manually as follows:
Press the KEYSTONE button on the top control or on 
the remote control to switch the Standard (for Vertical/
Horizontal)...

8

Sound Adjustment
1

Press the MENU button to display the On-Screen Menu. 
Use the Point ▲▼ buttons to select Sound. Press the 
Point ► or the SELECT button to access the submenu 
items. 
Press the VOLUME+/– buttons on the top control or on the 
remote control to adjust the volume. The volume dialog box 
appears on the screen for a few seconds.
Press the MUTE button on the remote control to select On 
to temporarily turn off the sound. To turn the sound back 
on, press the MUTE button again...

9

Basic OperationBasic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons 
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER, VIDEO or NETWORK button on the 
remote control to select the input source. See pages 31-32, 
41-42 for details.
Refer to the owner’s manual of “Network Set-up and 
Operation” for details about the network input....

30

Basic Operation
black out → normal → black out• • • • •
Press the NO SHOW button on the remote control to black out 
the image. To restore to normal, press the NO SHOW button 
again or press any other button. The screen changes each time 
you press the NO SHOW button as follows.
NO SHOw button
Press the P-TIMER button on the remote control. The P-Timer 
display 00:00 appears on the screen and the countdown starts 
(00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel 
the P-Timer...