Sanyo Projector Plc Xt35 User Manual

51

This	function	prevents	an	unauthorized	person	from	
changing	the	screen	logo.
	 Off	........... 	The	screen	logo	can	be	changed	freely	from	
the	Logo	Menu	(p.54).
	 On 	............ 	The	screen	logo	cannot	be	changed	without	
a	Logo	PIN	code.
If	you	want	to	change	the	Logo	PIN	code	lock	setting,	
press	the	SELECT	button	and	the	Logo	PIN	code	dialog	
box	appears.	Enter	a	Logo	PIN	code	by	following	the	
steps	 below.	 The	initial	 Logo	PIN	code	is	set	 to	“4321”	 at	
the	factory.
Logo PIN code lock...

5

Remote controlRemote control
The	eight	different	remote	control	codes	(Code	1–Code	8)	
are	assigned	to	the	projector;	the	factory-set,	initial	code	
(Code	1)	and	the	other	seven	codes	(Code	2	to	Code	8).	
The	same	code	should	set	on	both	the	projector	and	the	
remote	control.	For	example,	operating	the	projector	in	
“Code	7”,	the	remote	control	code	also	must	be	switched	to	
“Code	7”.
	To change the code for the projector
	 Select	a	remote	control	code	in	this	Setting	Menu.
	To change the code...

53

Power management
Time	left	before	the	lamp	is	off.
Press	the	SELECT	button	at	
Power	management	and	this	
dialog	box	appears.	Use	the	
Point	
7 8	buttons	to	choose	
one	of	the	three	options.	
Press	the	Point	
d	button	to	
select	the	timer,	and	then	use	
the	Point	
7 8	buttons	to	set	
timer.
Power management
For	reducing	power	consumption	as	well	as	maintaining	
the	lamp	life,	the	Power	management	function	turns	off	the	
projection	lamp	when	the	projector	is	not	used	for	a	certain	
period.
If	the...

54

Fan control
This	function	is	used	to	set	the	cooling	fans’	operation	to	the	
projector’s	setting	environment.	Set	this	function	properly	in	
accordance	with	the	projector’s	installation	method.	Other wise,	
the	cooling	fans	will	not	work	properly	and	that	causes	
malfunctions	of	the	projector	and	decreases	the	lamp	life.
Slant
Select	the	projector’s	installation	condition	from	the	following	
options:
	 Off	........... 	When	using	the	projector	within	the	range	of	the	
upward/	downward	inclination	of...

55

Change the PIN code lock setting
Use	the	Point	7 8	buttons	to	
switch	between	the	options.
Use	the	Point	7 8	button	to	select	Off,	On1,	or	On2	and	
then	move	the	pointer	to	 “Quit”	with	the	Point	
d	button.	
Press	the	SELECT	button	to	close	the	dialog	box.
Change the PIN code lock setting
Enter a PIN code
PIN code lock
This	function	prevents	the	projector	from	being	operated	
by	unauthorized	persons	and	provides	the	following	
setting	options	for	security.
	 Off 	...........	Unlocked.
	 On1...

56

The	PIN	code	can	be	changed	to	your	desired	four-digit	
number.	Press	the	Point	
d	buttons	to	select	“PIN	code	
change”	and	press	the	SELECT	button.	 The	New	PIN	code	
input	dialog	box	appears.	Set	a	new	PIN	code.
Change the PIN code Change the PIN code
CAUTION:
WHEN y OU HAVE CHANGED THE PIN 
CODE,  WRITE DOWN  THE NEW PIN 
CODE IN COLUMN OF  THE PIN CODE 
NO .  MEMO ON PAGE 76,  AND KEEP IT 
SECUREL y . IF y OU FORGET y OUR PIN 
CODE,  THE PROjECTOR  CAN NO LONGER 
BE STARTED .
Test pattern...

57

Factory default
This	function	returns	all	setting	values	except	for	the	user	
logo,	PIN	code	lock,	Logo	PIN	code	lock,	lamp	counter,	and	
filter	counter	to	the	factory	default	settings.
Exit	the	Setting	Menu.
Quit
Select	Factory	default	and	this	
box	appears.	Select	[Yes],	and	
the	next	box	appears.	Select	[Yes]	to	
activate	it.
Factory default
This	function	is	used	to	set	a	frequency	for	the	filter	cleaning.
When	the	projector	reached	a	specified	time	between	
cleanings,	a	Filter	warning	icon...

58
Turn	off	the	projector,	and	unplug	the	AC	power	cord	
from	the	 AC	outlet.
First,	clean	up	the	dust	on	the	projector	and	around	the	
air	vents.
1
2
Filter	prevents	dust	from	accumulating	on	the	optical	elements	inside	the	projector.	Should	the	filter	becomes	
clogged	with	dust	particles,	it	will	reduce	cooling	fans’	effectiveness	and	may	result	in	internal	heat	buildup	and	
adversely	affect	the	life	of	the	projector.	If	a	 “Filter	warning”	icon	(yellow	or	red)	appears	on	the	screen	and	the	
WARNING...

59
When	the	projection	lamp	of	the	projector	reaches	its	end	
of	life,	the	Lamp	replacement	icon	appears	on	the	screen	
and	LAMP	REPLACE	indicator	lights	yellow.	Replace	the	
lamp	with	a	new	one	promptly.	The	timing	when	the	LAMP	
REPLACE	indicator	should	light	is	depending	on	the	lamp	
mode.
Follow	these	steps	to	replace	the	lamp.
ORDER REPLACEMENT LAMP
Replacement	lamp	can	be	ordered	through	your	dealer.	 When	ordering,	give	the	following	information	to	the	dealer.
	●	Model No . of your projector  :...

60
Be	sure	to	reset	the	Lamp	counter	after	the	lamp	is	replaced.	When	the	Lamp	counter	is	reset,	the	LAMP	
REPLACE	indicator	stops	lighting	and	the	Lamp	replacement	icon	disappears.
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
7 8	buttons	to	move	the	red	
frame	pointer	to	the	Setting	Menu	icon.
Use	the	Point	ed	buttons	to	move	the	red	frame	
pointer	to	Lamp	counter	and	then	press	the	SELECT	
button.	 A	dialog	box	appears	showing	the	total	
accumulated	time	of	the	lamp	usage	and...