Sanyo Projector Plc Xt35 User Manual

Multimedia  Projector 
MODEL PLC-XT35/PLC-XT35L*
		 (*Models	without	lens.)
Owner’s Manual 


◆ Compact Design
	 This	projector	is	designed	compact	in	size	and	weight.	It	is	easy	to	carry	and	installed	anywhere	you	
wish	to	use.
◆ Functionally Rich
	 This	projector	has	many	useful	functions	such	as	lens	shifting,	ceiling	and	rear	projection,	perpendicular	
omnidirectional	projection,	variety	of	lens	options,	
etc.
◆ Multi-use Remote Control
	 Use	the	remote	control	as	wired	and	wireless,	or	as	a	PC	wireless	mouse.	Eight	remote	control	codes	and	
selectable	pointer	shapes	are	also...

3
Trademarks
Each	name 	of 	corporations 	or 	products 	in 	this 	book 	is 	either 	a 	registered 	trademark 	or 	a 	trademark 	of 	its 	respective	
corporation.
Features and Design .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Table of Contents   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
To the Owner   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Air	Circulation	6
Installing	the	Projector	in...

4
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK) .  NO 
USER-SERVICEABLE PARTS INSIDE EXCEPT 
LAMP REPLACEMENT . REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL .
THIS	SYMBOL	INDICATES	 THAT	DANGEROUS	
VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	
SHOCK	IS	PRESENT	 WITHIN	THIS	UNIT.
THIS	SYMBOL	INDICATES	 THAT	THERE	 ARE	
IMPORTANT	OPERATING	 AND	MAINTENANCE	
INSTRUCTIONS	IN	 THE	OWNER'S	MANUAL	
WITH	 THIS	UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before	installing...

5
All	the	safety	and	operating	instructions	should	be	read	
before	the	product	is	operated.
Read	all	of	the	instructions	given	here	and	retain	them	
for	later	use.	Unplug	this	projector	from	AC	power	supply	
before	 cleaning.	 Do	not	 use	 liquid	 or	aerosol	 cleaners.	 Use	
a	damp	cloth	for	cleaning.
Follow	all	warnings	and	instructions	marked	on	the	
projector.
For	added	protection	to	the	projector	during	a	lightning	
storm,	or	when	it	is	left	unattended	and	unused	for	long	
periods	of	time,	unplug	it...

6
Openings	in	the	cabinet	are	provided	for	ventilation.	
To	ensure	reliable	operation	of	the	product	and	to	
protect	it	from	overheating,	these	openings	must	not	
be	blocked	or	covered.	
	CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	When	
using	or	installing	the	projector,	the	following	
precautions	should	be	taken.	
–	Do	not	put	any	flammable	object	or	spray	can	near	 the	projector,	hot	air	is	exhausted	from	the	air	
vents.
–	Keep	the	exhaust	vent	at	least	3’	(1	m)	away	from	 any	objects.
–	Do...

7
Use	the	projector	properly	in	specified	positions.	Improper	positioning	may	reduce	the	lamp	life	and	result	in	
severe	accident	or	fire	hazard.
This	projector	can	project	the	picture	in	upward,	downward,	or	inclined	position	in	perpendicular	direction	to	the	
horizontal	plane.	When	installing	the	projector	in	upwardly	inclined	position,	install	the	projector	bottom	side	up.
Installing	the	Projector	in	Proper	Directions
✔Note:	 •	When	the	image	is	top/bottom	and	left/right	reversed,	set	the	ceiling...

8
Use	the	hand	grip	when	moving	the	projector.
Replace	the	lens	cap	and	retract	the	adjustable	feet	to	
prevent	damage	to	the	lens	and	cabinet	when	carrying.	
When	the	projector	is	not	in	use	for	an	extended	period,	put	
it	into	a	suitable	case	to	protect	the	projector.
 
CAUTION IN CARRyING OR 
TRANSPORTING THE PROjECTOR
–	 Do	 not	drop	 or	bump	 the	projector,	 other wise	 damages	
or	malfunctions	may	result.
–	 When 	carr ying 	the 	projector, 	use 	a 	suitable 	carr ying	
case.
–	 Do 	not 	transport...

9
AC Power Cord for the United Kingdom:
This	cord	is	already	fitted	with	a	moulded	plug	incorporating	a	fuse,	the	value	of	which	is	indicated	on	the	pin	face	of	the	
plug.	Should	the	fuse	need	to	be	replaced,	an	ASTA	approved	BS	1362	fuse	must	be	used	of	the	same	rating,	marked	thus	
ASA.	If	the	fuse	cover	is	detachable,	never	use	the	plug	with	the	cover	omitted.	If	a	replacement	fuse	cover	is	required,	
ensure	it	is	of	the	same	colour	as	that	visible	on	the	pin	face	of	the	plug	(i.e.	red	or	orange)....

10
Bottom
Back
q	Filter
w	Speaker
e Lens Release Button
r	Top Controls and Indicators
t  Maintenance Cover
  WARNING:  FOR MAINTENANCE USE   
  ONLy . DO NOT OPEN .
y	Lens Cap  (for	PLC-XT35)
!7
!4!6!5
!2
!3
	CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.		
Do	not	put	heat-sensitive	objects	near	this	
side.
u
e
rt
y
Front
!0o
qw
i✽
o
!1	Infrared Remote Receiver (Back)
!2  Terminals and Connectors
!3  Lamp Cover
!4  Power Cord Connector
!5  Optional Parts Attachment
!6  Air Intake Vent
!7	Hand Grip...