Sanyo Projector Plc Xc55 User Manual

							
41

Video Input
User preset image in the Image Adjust Menu. (pp.42-43)
Image 1 ~ 4
M o v e   t h e   r e d   f r a m e p o i n t e r  t o  t h e  l e v e l  a n d press the SELECT button.
The level being selected.
Image Select Menu
Image Select Menu icon
Colorboard
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point ◄►  buttons  to  move  the  red frame pointer to the Image Select Menu icon.
Press  the  Point ▲▼  buttons  to  move  the  red  frame pointer to the level that you want to set and then press the SELECT button.
Menu Operation
1
2
Normal picture level preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.
Cinema
P i c t u r e  l e v e l  s u i t a b l e  f o r  t h e  i m a g e  p r o j e c t e d  o n  a blackboard.  See above for further description.
Blackboard (Green)
Picture level suitable for viewing picture in a bright room.
Dynamic
At  the  time  of  simple  projection  on  the  colored  wall,  you can get the close color image to the color image projected on  a  white  screen  by  selecting  the  similar  color  to  the wall  color  from  the  preset  four  colors.  Press  the  SELECT button to choose the color. 
Video Input 
						

							
4

Video Input
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point ◄►  buttons  to  move  the  red frame pointer to the Image Adjust Menu icon.
Press  the  Point ▲▼  buttons  to  move  the  red  frame pointer  to  the  item  that  you  want  to  adjust,  and  then press  the  SELECT  button.    The  level  of  each  item  is displayed.  Adjust each level by pressing the Point ◄► buttons.
Image Level Adjustment
1
2
Image Adjust Menu
Press the Point ◄ button to decrease the contrast and the Point ► button to increase contrast. (From 0 to 63.)
Press  the  Point ◄  button  to  adjust  the  image  darker  and the Point ► button to adjust the image brighter. (From 0 to 63.)
Contrast
Brightness
Press  the  Point ◄  button  to  lighten  the  red  tone  and  the Point ► button to deepen the red tone. (From 0 to 63.)
White balance (Red)
Press the Point ◄ button to lighten the green tone and the Point ► button to deepen the green tone. (From 0 to 63.)
White balance (Green)
Press  the  Point ◄  button  to  lighten  the  blue  tone  and  the Point ► button to deepen the blue tone. (From 0 to 63.)
White balance (Blue)
Press  the  Point ◄  button  or  the  Point ►  button  for  Color temp. level that you want to select. (XLow, Low, Mid, or High) Color temp .
Press the Point ◄ button to lighten the color and the Point ► button to deepen the color. (From 0 to 63.)
Press  the  Point ◄►  buttons  to  obtain  a  proper  color.  (From 0 to 63.)
Color
Tint
Notes:
  • The Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N.
  • After adjusting any of the White balance Red, Green, or Blue, the Color temp. changes to "Adj.".
P r e s s  t h e  P o i n t ◄ ► b u t t o n s  t o  a d j u s t  t h e value.
M o v e   t h e   r e d   f r a m e  pointer  to  the  item  to  be selected  and  then  press the SELECT button.
Image Adjust Menu icon
Video Input 
						

							
4

Video InputVideo Input
To  reset  the  adjusted  data,  select  Reset  and  press  the SELECT  button.    The  confirmation  box  appears  and  then select  [Yes].    All  adjustments  returns  to  their  previous figures.
Reset
Press  the  Point ◄►  buttons  to  obtain  better  balance  of contrast. (From 0 to 15.)
Gamma
Press the Point ◄ button to soften the image and the Point ► button to sharpen the image. (From 0 to 15.)
Sharpness
To  store  the  adjusted  data,  select  Store  and  press  the SELECT  button.    Select  a  level  from  Image  1  to  4  with the  Point ▲▼  buttons  and  press  the  SELECT  button.    A confirmation box appears and then select [Yes].Stored  data  can  be  called  up  by  selecting  "Image"  in  the Image Level Selection on pages 40-41.
Store
Exit the Image Adjust Menu.
Quit
Note:
    Noise  reduction  and  Progressive  cannot  be  selected 
when  480p,  575p,  720p,  1035i,  or  1080i  is  selected. (p.39)
Interlaced  video  signal  can  be  displayed  in  a  progressive picture.  Select one of the following.
 Off  . . . .  disabled.
  L1. . . . .  Select "L1" for an active picture.
  L2. . . . .  Select "L2" for a still picture.
  Film  . . .  S e l e c t  " F i l m "  f o r  w a t c h i n g  a  f i l m .  W i t h  t h i s function,  the  projector  reproduces  pictures faithful to the original film quality.
Progressive
Noise  reduction
Noise  interference  on  the  screen  can  be  reduced.    Select one of the following to get smoother images.
  Off  . . . .  disabled.
  L1. . . . .  lower reduction 
  L2. . . . .  higher reduction 
Image Level MenuMove  the  red  frame  pointer to  an  image  item  to  be  set and  then  press  the  SELECT button.
Store item
T h e   c o n f i r m a t i o n   b o x appears  and  then  select [Yes]. 
						

							
44

Video Input
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point ◄►  buttons  to  move  the  red frame pointer to the Screen Menu icon.
Press  the  Point ▲▼  buttons  and  move  the  red  frame pointer to the function that you want to select and then press the SELECT button.
Provide the image at a wide screen ratio of 16:9.
Wide
Provide the image at a normal video aspect ratio of 4:3.
Normal
Screen Size Adjustment
Notes:
  •  Wide  cannot  be  operated  when  720p, 
1035i,  or  1080i  is  selected  in  the  AV System Menu (p.39).
•   When no signal is detected, "Normal" is 
set  automatically  and  the Aspect  dialog box disappears.
•   The adjustable range for Scale H/V and 
Position H/V is limited depending on the input signal.
1
2
Move  the  red  frame  pointer  to  a function  and  press  the  SELECT button.
Screen Menu
Screen Menu icon
Adjust  the  screen  scale  and  position  manually  with  this function.Press  the  SELECT  button  at  Custom  and  the  "Custom"  is displayed  on  the  screen  for  a  few  seconds  and  then  the Aspect dialog box appears.
 Scale H/V  ..................  A d j u s t   t h e   H o r i z o n t a l / Ve r t i c a l 
screen scale.
  H&V  ...........................  When  set  to  "On",  the  aspect  ratio 
is  fixed.  The  "Scale  V"  appears dimmed and becomes unavailable. Adjust  the  "Scale  H",  then  the s c r e e n   s c a l e   i s   a u t o m a t i c a l l y m o d i f i e d   b a s e d   o n   t h e   a s p e c t ratio. 
  Position H/V  ..............  A d j u s t   t h e   H o r i z o n t a l / Ve r t i c a l 
screen position.
  Common  ...................  S a v e   t h e   a d j u s t e d   s c a l e   t o   a l l 
t h e   i n p u t s .   P r e s s   t h e   S E L E C T button  at  Common  to  display  a c o n f i r m a t i o n   b o x .   To   s a v e   t h e scale, press the SELECT button at "Yes".  When  Custom  is  selected, the saved scale is used.
  Reset  .........................  R e s e t   t h e   a l l   a d j u s t e d   v a l u e s . 
Press the SELECT button at Reset to  display  a  confirmation  box.  To reset, press the SELECT button at "Yes".
Custom
Press  the  SELECT button  at  Common or  Reset,  to  display a confirmation box.
Setting 
						

							
45

Video InputSetting
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point ◄►  buttons  to  move  the  red frame pointer to the Setting Menu icon.
Language
The  language  used  in  the  On-Screen  Menu  is  available  in English,  German,  French,  Italian,  Spanish,  Portuguese, Dutch,  Swedish,  Finnish,  Polish,  Hungarian,  Romanian, Russian, Chinese, Korean, or Japanese.
Press  the  Point ▲▼  buttons  to  move  the  red  frame  pointer to the item that you want to set and then press the SELECT button. The Setting dialog box appears.
Setting
This  projector  has  Setting  menu  that  allows  you  to  set  up the other various functions described as follows:
1
2Set  the  red  frame  pointer to  the  item  and  press  the SELECT button.
P r e s s  t h e  S E L E C T button  at  Language item,  the  Language Menu appears.
Setting Menu (Language)
Setting Menu icon
See the next pages for other items. 
						

							
46

Auto setup
T h i s  f u n c t i o n  e n a b l e s  I n p u t  s e a r c h ,  A u t o  K e y s t o n e correction  and Auto  PC  adjustment  by  pressing  the AUTO SETUP  button  on  the  top  control  or  the AUTO  SET  button on  the  remote  control.  Settings  for  those  functions  can  be altered as follows:
Input search    
This  function  detects  the  input  signal  automatically.  When finding  a  signal,  the  search  will  stop.    Use  the  Point ◄► buttons to select one of the following.
 Off  . . . .Input search does not work.
  On1  . . .Input search works under the situation below.
    •  When pressing the AUTO SETUP button on the top 
       control or the AUTO SET button on the remote control.
  On2  . . .Input search works under the situation below.
    •   When turning on the projector with pressing the 
        POWER ON/STAND-BY button on the top control or         on the remote control.
    •  When pressing the AUTO SETUP button on the top 
       control or the AUTO SET button on the remote control.
    •  When missing the current input signal.   
    • If the No show or Freeze function is active, cancel it to 
       activate the Input search. It is also unavailable when 
       On-Screen menu is displayed
.
  • While  Input  Search  is  set  On1  or  On2,  the  status  of   
Input  and  Lamp  mode  are  displayed  every  time  the signal is switched.
  •  I f  a n y  o f  t h e  C O M P U T E R  1 / 2 ,  V I D E O ,  S - V I D E O 
or  COMPONENT  buttons  on  the  remote  control,  or AUTO  SETUP  button  on  the  top  control  is  pressed while Input search is on, Input search will stop.
Auto PC Adj .
On  . . . .Enables Auto PC Adjustment when pressing the             
              AUTO SETUP button on the top control.
Off  . . . .Disables Auto PC Adjustment.
Auto Keystone 
Auto . . .Always works and corrects keystone distortion                  according to the projector's tilt. Manual  .Works only when pressing the AUTO SETUP                    button on the top control or the AUTO SET                     button on the remote control.Off  . . . .Disables Auto Keystone.
Notes:
  • Input  search, Auto  PC  Adj.  and  Auto Keystone  cannot  be  set  "Off"  at  the same time.
 • Auto  Keystone  adjusts  automatically by  pressing  the  AUTO  SETUP  button either  it  is  set  on  "Auto"  or  "Manual"  in setting menu.
  • A u t o   K e y s t o n e   c o r r e c t s   v e r t i c a l 
distortion  only,  not  correct  horizontal distortion.
  • T h e   A u t o   K e y s t o n e   c a n n o t   w o r k 
when  Ceiling  feature  is  set  "On"  in  the Setting menu (p.50).
  • P e r f e c t   c o r r e c t i o n   o f   t h e   i m a g e 
distortion  cannot  be  ensured  with  the Auto  setup  function.  If  the  distortion  is not  corrected  properly  by  pressing  the AUTO  SETUP  button,  adjust  manually b y  p r e s s i n g  t h e  K E Y S TO N E  b u t t o n o n  t h e  r e m o t e  c o n t r o l  o r  s e l e c t i n g Keystone  in  the  Setting  menu  (pp.22, 24, 47).
  • Fine  sync,  Total  dots,  Horizontal  and 
Vertical  position  of  some  computers cannot  be  fully  adjusted  with  the  Auto P C  A d j u s t m e n t  f u n c t i o n .  W h e n  t h e i m a g e  i s  n o t  p r o v i d e d  p r o p e r l y  w i t h this  operation,  manual  adjustments  are required (pp.29–30).
SettingSetting
S e l e c t   A u t o   s e t u p a n d  t h i s  b o x  a p p e a r s . C h o o s e   t h e   d e s i r e d setting  for  Input  search, Auto  keystone  and  Auto PC adj. with the Point ◄► buttons. 
						

							
47

Setting
Blue back
Press  the  Point ◄►  buttons  to  switch  On/Off.    When  this function  is  "On",  a  blue  image  is  displayed  while  the  input signal is not detected. 
Keystone
This  function  corrects  distortion  of  a  projected  image. Select  either  Store  or  Reset  with  the  Point ◄►  buttons, and  then  press  the  SELECT  button.    The  keystone  dialog box appears.  Correct keystone with the Point ▲▼ buttons. see page 22.
 Store  . . . .  store the keystone correction even when the AC power cord is unplugged.
  Reset . . . .  reset  the  keystone  correction  when  the  AC power cord is unplugged.
Display
Press  the  Point ◄►  buttons  to  switch  Off/Countdown  off/On. This function decides to display On-Screen Displays.Off. . . . . . . . . . . . .  D o  n o t  s h o w  O n - S c r e e n  D i s p l a y s , except.Countdown off  . . .  S h o w  t h e  i n p u t  i m a g e  i n s t e a d  o f the  countdown  when  turning  on  the projector.  Use this function when you want  to  project  the  image  as  early  as possible  even  when  the  lamp  is  not bright enough.On. . . . . . . . . . . . .  S h o w  a l l  t h e  O n - S c r e e n  D i s p l a y s . U s e  t h i s  f u n c t i o n  w h e n  y o u  w a n t t o  p r o j e c t  i m a g e s  a f t e r  t h e  l a m p b e c o m e s  b r i g h t  e n o u g h .    F a c t o r y default setting is this mode.
  ●  On-Screen Menu 
  ●  "Power off?" message 
  ●  P-Timer 
  ●  "No signal" message for Power management item. 
(p.50)
  ●  "Please wait ..." for Auto PC adjustment.
  ●  Arrows for panning mode in the Screen Menu. (p.34)
Setting 
						

							
48

Setting
Logo select
This function decides the start-up display as follows:
 User. . . .  the image you captured
  Default. . the factory-set logo
  Off . . . . .  countdown only
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions.
Note:
    When  On  is  selected  in  Logo  PIN  code  lock  function, 
L o g o  s e l e c t  a n d  C a p t u r e  f u n c t i o n s  c a n n o t  b e selected.
Logo select
Capture
This  function  enables  you  to  capture  the  image  being projected  and  use  it  for  a  start-up  display  or  interval  of presentations.After  capturing  the  projected  image,  go  to  the  Logo select  function  and  set  it  to  "User".    Then  the  captured image  is  displayed  when  turning  on  the  projector  next time or pressing the NO SHOW button. (p.24) To  capture  the  image,  select  [Yes].    To  cancel  the Capture function, select [No].
Notes:
  • Before  capturing  an  image,  select  Standard  in  the 
Image  Select  Menu  to  capture  a  proper  image. (pp.31-32, 40-41)
  • A  signal  from  a  computer  can  be  captured  up  to 
XGA  (1024x768).    A  signal  from  video  equipment c a n  b e  c a p t u r e d  e x c e p t  f o r  7 2 0 p ,  1 0 3 5 i ,  a n d 1080i.
  • When  capturing  the  image  that  has  been  adjusted 
by  the  Keystone  function,  the  adjustment  data  is automatically  reset  and  the  projector  captures  an image without keystone adjustment.
  • When  the  Logo  PIN  code  lock  function  is  "On", 
Capture menu cannot be selected.
  • W h e n  s t a r t i n g  t o  c a p t u r e  a  n e w  i m a g e ,  t h e 
previously  stored  image  is  cleared  even  if  you cancel the capturing.
  • 
"User"  cannot  be  selected  when  the  image  is  not captured.
Select  [Yes]  to  capture the projected image.
S e l e c t   [ Ye s ]   t o stop capturing.
Capture
Setting 
						

							
4

SettingSetting
T h i s  f u n c t i o n  p r e v e n t s  a n  u n a u t h o r i z e d  p e r s o n  f r o m changing the screen logo.
  Off  . . . . . .   the  screen  logo  can  be  changed  freely  from the Logo select menu.  (p.48)  On  . . . . . .   the  screen  logo  cannot  be  changed  without the Logo PIN code.
If  you  want  to  change  the  Logo  PIN  code  lock  setting, enter  a  Logo  PIN  code  along  the  following  steps.    The initial Logo PIN code is set "4321" at the factory.
Logo PIN code lockLogo PIN code lock
To Enter the Logo PIN code
Select  a  number  by  pressing  the  Point ▲▼  buttons.  And then  press  the  Point ►button  to  fix  the  number  and  move the  pointer.    The  number  changes  to  "".    If  you  fixed an  incorrect  number,  move  the  pointer  to  the  number you  want  to  correct  by  pressing  the  Point ◄  button,  and then  select  the  correct  number  by  pressing  the  Point ▲▼ buttons.
Repeat this step to complete entering a four-digit number.
After  entering  the  four-digit  number,  move  the  pointer  to "Set"  by  pressing  the  Point ►button.    Press  the  SELECT button  so  that  you  can  change  the  Logo  PIN  code  lock setting.
If  you  entered  an  incorrect  Logo  PIN  code,  "Logo  PIN code" and the number () turns red.  Enter a correct Logo PIN code all over again.
To Change the Logo PIN code
Logo  PIN code  can  be  changed  to  your  desired  four-digit number.    Select  "Logo  PIN  code  change"  with  the  Point ▼button  and  press  the  SELECT  button.    Set  a  new  Logo PIN code.
Be  sure  to  note  the  new  Logo  PIN  code  and  keep  it  on hand.  If you lost the number, you could no longer change t h e  L o g o  P I N  c o d e  s e t t i n g .    F o r  d e t a i l s  o n  P I N  c o d e setting,  refer  to  relevant  instructions  of  the  PIN  code  lock function on pages 53 and 54.
CAUTION:WHEN  yOU  HAVE  CHANGED  THE LOGO  PIN  CODE, WRITE  DOWN  THE  NEW  PIN  CODE  IN  COLUMN  OF THE  LOGO  PIN  CODE  NO .  MEMO  ON  PAGE  7,  AND KEEP  IT  SECURELy .  SHOULD  THE  LOGO  PIN  CODE BE LOST OR FORGOTTEN, THE PROjECTOR CAN NO LONGER BE OPERATED .
Logo PIN code lock Dialog Box
A f t e r  a  c o r r e c t  L o g o  P I N  c o d e  i s  e n t e r e d ,  t h e following dialog box appears.
Select On/Off by pressing the Point ◄► buttons or change the Logo PIN code. 
						

							
50

Setting
Ceiling
When  this  function  is  "On",  the  picture  is  top/bottom  and left/right  reversed.    This  function  is  used  to  project  the image from a ceiling mounting the projector.
Rear
When this function is "On", the picture is left/right reversed.  T h i s  f u n c t i o n  i s  u s e d  t o  p r o j e c t  t h e  i m a g e  t o  a  r e a r projection screen.
Ceiling 
Rear 
Standby mode
This  function  is  available  when  the  projector  is  turned  off and  in  Stand-by.   It  is  recommended  to  use  Eco  under normal condition.
  Normal. . . . . . . . . .  n o r m a l   p o w e r   c o n s u m p t i o n   i n Stand-by condition.    Eco. . . . . . . . . . . . .  l o w e r  p o w e r  c o n s u m p t i o n  t h a n Normal mode in Stand-by condition. 
Setting
Power management
For  reducing  power  consumption  as  well  as  maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period.When  the  input  signal  is  interrupted  and  no  button  is pressed  for  more  than  30  seconds,  the  timer  display  with "No  signal"  appears.    The  countdown  starts  to  turn  off  the lamp.
Select one of the operations:
  Ready. . . . . . . .   When  the  lamp  has  been  fully  cooled down,  the  POWER  indicator  changes to  green  blinking.  In  this  condition,  the projection lamp is  turned on if the input s i g n a l  i s  r e c o n n e c t e d  o r  a n y  b u t t o n on  the  top  control  or  remote  control  is pressed.  Shut down  . . . .   When  the  lamp  has  been  fully  cooled down, the power is turned off.  Off  . . . . . . . . . .   Power management function is off.
Then set the countdown timer with the Point ◄►buttons.
Time left before Lamp is off.
Press the SELECT button a t  P o w e r  m a n a g e m e n t a n d  t h i s  b o x  a p p e a r s .  C h o o s e   o n e   o f   t h r e e settings  with  the  Point ◄►  buttons,  and  go  to  the timer  with  the  Point ▲▼ buttons  and  set  time  with the Point ◄►buttons.
Power management
Note:
    Factory default is " Ready, 5 min".