Sanyo Projector Plc Xc55 User Manual

							
71
   Appendix
Indicators and Projector Condition
Check the indicators for the projector condition.  
The projector is operating normally  .
The projector is off. (The AC power cord is unplugged.)
The  projector  is  in  stand-by  mode.  Press  the  POWER ON/STAND-BY button to turn on the projector.
Projector ConditionPOWERred/green
Indicators
LAMP REPLACEyellow
WARNING
TEMP  . 
red
The filter is scrolled using the Filter control function in the setting menu.When  the  filter  is  being  scrolled,  the  Filter  replacement icon  and  “Please  wait...”  message  (Fig.  1)  appear  on  the screen for about 30 seconds.
The projector is in the Power management mode. 
The projector is operating normally. 
WARNINGFILTER orange

Fig.1    Filter replacement icon and “Please wait...”


• • • off• • •  blinking slow                (approx. 2 seconds ON,2 seconds OFF)
• • •  blinking fast 
   (approx. 0.5 seconds ON,  0.5 seconds OFF)
• • • red


The temperature inside the projector is elevated close to the abnormally high level.
The  temperature  inside  the  projector  is  abnormally  high. The  projector  cannot  be  turned  on.  When  the  projector is  cooled  down  enough  and  the  temperature  returns  to normal, the POWER indicator lights red and the projector can  be  turned  on.  (The  WARNING  TEMP.  indicator keeps blinking.) Check and replace the filter.
Projector ConditionPOWERred/green
Indicators
LAMP REPLACEyellow
WARNINGFILTER orange


The projector is detecting abnormal condition .
• • • green / orange / yellow
blinking fast green
blinking fast red
green
green
green
WARNING
TEMP  . 
red
blinking fast red
blinking fast red
The projector is preparing for stand-by or the projection lamp is being cooling down. The projector cannot be turned on until cooling is completed. 
						

							
7

AppendixAppendix
The projector has been cooled down enough and thetemperature  returns  to  normal.  When  turning  on  the projector,  the  WARNING  TEMP.  indicator  stops  blinking. Check and replace the filter.
Projector ConditionPOWERred/green
Indicators
LAMP REPLACEyellow
WARNINGTEMP  . 
red
WARNING
FILTER orange

AnyThe lamp has been used overtime. Replace the lampimmediately and then reset the lamp counter. The indicator will be turned off after resetting the counter.
Any
If the Filter counter reached a time set in the timer setting,a  Filter  replacement  icon  (Fig.2)  appears  on  the  screen and  the  WARNING  FILTER  indicator  on  the  top  control lights  up.  Replace  the  filter  as  soon  as  possible.  If  the filter  is  out  of  scroll  and  the  projector  reaches  a  time  set in  the  timer  setting,  Fig.  3  appears  on  the  screen  and  the WARNING  FILTER  indicator  lights  up.  Replace  the  filter cartridge  as  soon  as  possible.If  the  filter  is  clogged  and no scroll is left in the filter cartridge,a Filter cartridge replacement icon (Fig.4) appears on thescreen  and  the  WARNING  FILTER  indicator  lights  up. Replace the filter cartridge as soon as possible.Note:• Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function is set to “Off” (p.47), during “Freeze” (p.23), or “No show” (p.24).
Fig.2    Filter replacement icon
Fig.4    Filter cartridge replacement icon
Fig.3
The  filter  cartridge  is  not  installed  in  the  projector.  Check the  filter  compartment  to  see  if  the  filter  cartridge  is installed  in  the  projector.  When  the  filter  cartridge  is installed  and  the  indicators  continue  to  light  and  blink, read the column below.
The  projector  detects  an  abnormal  condition  and  cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug  the  AC  power  cord  and  contact  the  dealer  or the  service  center.  Do  not  leave  the  projector  on.  It  may cause an electric shock or a fire hazard.
blinking fast orangeblinking fast yellow
 When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER  indicator  lights  orange.  When  this  indicator  lights  orange,  replace  the  filter  or  the  filter  cartridge  with  a  new one promptly.Reset the Filter counter and Scroll counter after replacing the filter \
cartridge (p.59). 
  When  the  projection  lamp  reaches  its  end  of  life,  the  LAMP  REPLACE  indicator  lights
 yellow.  When  this  indicator lights yellow,  replace  the  projection  lamp  with  a  new  one  promptly.  Reset  the  lamp  counter  after  replacing  the  lamp (p.62).



 red
orange
yellow 
						

							
7

Appendix
Compatible Computer Specifications
Basically  this  projector  can  accept  the  signal  from  all  computers  with  the  V,  H-Frequency  below  mentioned and less than 140 MHz of Dot Clock for Analog signal and 110 MHz of Dot Clock for digital signal.  When selecting these modes, PC adjustment can be limited.
MAC LC13640 x 48034.9766.60MAC 13640 x 48035.0066.67
MAC 16832 x 62449.7274.55
MAC 191024 x 76860.2475.08
SVGA 1800 x 60035.15656.25SVGA 2800 x 60037.8860.32SVGA 3800 x 60046.87575.00SVGA 4800 x 60053.67485.06SVGA 5800 x 60048.0872.19SVGA 6800 x 60037.9061.03SVGA 7800 x 60034.5055.38SVGA 8800 x 60038.0060.51SVGA 9800 x 60038.6060.31
SVGA 11800 x 60038.0060.51
XGA 101024 x 768XGA 111024 x 768XGA 121024 x 768XGA 131024 x 768
62.0477.07
XGA 141024 x 768
61.0075.70
XGA 151024 x 768
35.52286.96(Interlace)46.9058.20
XGA 81024 x 768
47.0058.30
XGA 91024 x 768
58.0372.00
63.4879.3536.0087.17(Interlace)
SXGA 71280 x 1024
SXGA 101280 x 960
81.1376.107
60.0060.00
XGA 11024 x 768
XGA 41024 x 768
48.3660.00
XGA 61024 x 768XGA 71024 x 768
56.47670.07
48.5060.0244.0054.58
SXGA 81280 x 1024SXGA 91280 x 102463.9860.0279.97675.025
XGA 51024 x 76860.3174.92
VGA 7640 x 48043.26985.00
575i––––––––15.62550.00(Interlace)480i––––––––15.73460.00(Interlace)
SXGA 121152 x 90071.4075.60SXGA 111152 x 90061.2065.20
SVGA 10800 x 60032.7051.09
SXGA 131280 x 102450.0086.00(Interlace)
ON-SCREEN DISPLA yRESOLUTIONH-Freq .(kHz)V-Freq .(Hz)VGA 1640 x 48031.4759.88VGA 2720 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.8672.81VGA 6640 x 48037.5075.00
SXGA 11152 x 86464.2070.40
ON-SCREEN 
DISPLA yRESOLUTIONH-Freq .(kHz)V-Freq .(Hz)
SXGA 41280 x 102463.3459.98SXGA 51280 x 1024SXGA 61280 x 102463.7460.0171.6967.19
SXGA 21280 x 102462.5058.60SXGA 31280 x 102463.9060.00
XGA 21024 x 76868.67784.997XGA 31024 x 76860.02375.03
SXGA 181280 x 102446.4386.70(Interlace)SXGA 191280 x 102463.7960.18
SXGA 141280 x 1024SXGA 151280 x 1024SXGA 161280 x 1024SXGA 171152 x 900
50.0094.00(Interlace)63.3760.0176.9772.0061.8566.00
MAC1280 x 96075.0075.08MAC1280 x 1024480p––––––––575p––––––––
80.0075.0831.4759.88
1080i––––––––
31.2550.00
33.7560.00(Interlace)
720p––––––––
1035i––––––––
37.5050.00
33.7560.00(Interlace)
1080i––––––––28.12550.00(Interlace)
 SXGA +11400 x 105063.97960.190
MAC211152 x 87068.6875.06
WXGA 21360 x 768WXGA 31376 x 768WXGA 41360 x 768
47.7060.0048.3660.0056.1672.00
WXGA 11366 x 768
UXGA 41600 x 120093.7575.00
UXGA 11600 x 1200UXGA 21600 x 1200UXGA 31600 x 1200
75.0060.0081.2565.0087.570.00
48.3660.00
 SXGA +21400 x 105065.34660.116 SXGA +31400 x 105065.12159.902
SXGA 201280 x 102491.14685.024
WXGA 61280 x 768WXGA 71280 x 768WXGA 81280 x 768
47.77659.8760.28974.89368.63384.837
720p––––––––45.0060.00 
						

							
74

Appendix
RESOLUTION
640 x 480
640 x 480
768 x 575
800 x 600
1366 x 768
ON-SCREEN DISPLA y
D-720p
D-1035i
D-1080i
D-1080i
1024 x 768
1360 x 768
1376 x 768
When the input signal is digital from DVI terminal, refer to the chart b\
elow.
Note:
 • When the input signal is D-SXGA 1, D-SXGA 2, D-SXGA 3,  or D-SXGA+1, images may not be displayed properly depending on computers.  • The specifications are subject to change without notice.
1360 x 768
1366 x 768
1280 x 768
1280 x 768
D-SXGA1
D-SXGA2
D-SXGA+1
D-720p
D-SXGA3
D-VGA
D-480p
D-575p
D-SVGA
D-WXGA 1
D-XGA
D-WXGA 2
D-WXGA 3
D-WXGA 4
D-WXGA 5
D-WXGA 6
D-WXGA 7
ON-SCREEN 
DISPLA yH-Freq .(KHz)V-Freq .(Hz)
31.4759.94
31.4759.88
31.2550.00
37.87960.32
48.3660.00
43.36360.00
47.7060.00
48.3660.00
56.16072.000
46.50050.000
47.77659.870
60.28974.893
RESOLUTION
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
1280 x 1024
1280 x 1024
1400 x 1050
1280 x 720
1280 x 1024
H-Freq .(KHz)
37.50
33.75
33.75
28.125
63.98
60.276
63.97
45.00
31.65
   Appendix
V-Freq .(Hz)
50.00
60.00(Interlace)60.00(Interlace)50.00(Interlace)
60.02
58.069
60.19
60.00
29.80 
						

							
75

Appendix   Appendix
Technical Specifications
Mechanical Information
 Projector Type  Multi-media Projector 
  Dimensions (W x H x D)  410.0 mm x 85.0 mm x 262.8 mm  (Not including protrusions) 
  Net Weight  8.82lbs (4.0 kg) 
  Foot Adjustment  0˚ to 10.0˚  Panel Resolution
 LCD Panel System  0.63" TFT Active Matrix type, 3 panels 
  Panel Resolution  1,024 x 768 dots 
  Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)  Signal Compatibility
 Color System  PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N 
  High Definition TV Signal  480i, 480p, 575i, 575p, 720p, 1035i, and 1080i 
  Scanning Frequency  H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz  Optical Information
 Projection Image Size (Diagonal)  Adjustable from 40" to 300"      
  Projection Lens  F 1.60-1.76 lens with f =22.33 mm ~ 26.80 mm with manual zoom and focus
 
  Throw Distance  4.6' ~ 41.3' (1.4 m ~ 12.6 m) 
  Projection Lamp  220W 
 Interface
 Video Input Jack  RCA Type x 1 
   S-video Input Jack                                 Mini DIN 4 pin x 1\
 
  Audio Input Jacks  RCA Type x 2 
  Computer Input 1/DVI-I   Digital/Analog RGB (DVI-I ) Terminal x 1
   Computer Input 2/Component Input      Analog RGB (Mini D-sub 15 pin) Terminal x 1                          Monitor Output                                       Analog RGB (Mini D-sub 15 pin) Terminal x 1                                                    
   Computer2/ Component Audio Input Jack 
                                                                  Mini J\
ack (stereo) x 1                                                      \
                                  
 Computer1 Audio Input Jack  Mini Jack (stereo) x 1 
  Control Input   Mini D-sub 9 pin x 1 
  Audio Output Jack  Mini Jack (stereo) x 1 (Variable)  Audio
 Internal Audio Amp  7.0 W RMS 
  Built-in Speaker  1 speaker,  ø1.46" (37mm)   Power
 Voltage and Power Consumption  AC 100 ~ 120 V (3.4A Max. Ampere), 50/60 Hz (The U.S.A and Canada) 
    AC 200 ~ 240 V (1.7A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)  Operating Environment
 Operating Temperature  41˚F ~ 95˚F (5˚C ~ 35˚C) 
  Storage Temperature  14˚F ~ 140˚F (-10˚C ~ 60˚C)  Remote Control
 Battery  AA or LR6 1.5 V ALKALINE TYPE x 2 
  Operating Range  16.4' (5 m)/±30˚ 
  Dimensions  1.9" (W) x 0.87" (H) x 5.7" (D) (49 mm x 22 mm x 145.3 mm) 
  Net Weight  3.53 oz (100 g) (including batteries) 
						

							
76

Appendix
Accessories Owner's Manual (CD-ROM)
  Quick Reference Guide 
  AC Power Cord 
  Remote Control and Batteries 
  VGA Cable 
  PIN Code Label
● The specifications are subject to change without notice.● LCD  panels  are  manufactured  to  the  highest  possible  standards.    Even  though  99.99%  of  the  pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
      Model No .COMPONENT-VGA Cable : POA-CA-COMPVGA 
SCART-VGA Cable  : POA-CA-SCART 
VGA Cable (10m)                            : KA-MC-DB10
The  parts  listed  below  are  optionally  available.    When  ordering  those  parts,  specify  the  item  and  Model No. to the sales dealer.
Optional Parts
   Appendix 
						

							
77

CONTROL PORT CONNECTOR (D-sub  pin)
COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red (R/Cr) Input/R Output
Ground (Horiz.sync.)
Green (G/Y) Input/G Output
-----
Blue (B/Cb/---) Input/B Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5

4

6
7
8
5V / ---
Horiz. sync. Input/Output (Composite H/V sync.Input)
Ground (Vert.sync.)
DDC data / ---
Ground 
Vert. sync. Input/Output
DDC clock / ---
9
13
10
12
11
14
15
   Appendix
-----
R X D
T X D
-----
SG
-----
RTS
CTS
Serial
1
2
3
4
5
6
7
8
-----9
DVI-I (DIGITAL/ANALOG)
191721018311194122051321614227152381624
C1C2
C3C5C4T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
Analog Vert. sync
1
5

4

6
7
8
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect

1
10
1
11
14
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
1
18
0
1


4
Analog Red Input
Analog Ground (R/G/B)
Analog Green Input
Analog Horiz. sync
Analog Blue Input
C1
C5
C2
C4
C3 
						

							
78

Appendix
Dimensions
8.60(218.5)(50.7)
2.17(55.0)
(410.0)5.91(150.2)
3.04(77.3)
3.52(89.4)
2.17(55.2)
10.35(262.8)
10.50(266.8)
3.35(85.0)4.04(102.7)4.38(111.2)
2.81(71.5)2.17(55.0)
(56.3)
(143.0)
(230.0)(50.0)
(50.8)(102.0)
(97.0)
(30.0)
1.97
16.14
Unit: inch (mm)
Screw Holes for Ceiling MountScrew: M4Depth: 0.47(12.0)
Appendix 
						

							
7

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. 
PIN Code Number Memo
Factory default set No: 1 2 3 4*
*  Should  the  four-digit  number  be 
changed,  the  factory  set  number will be invalid.
PIN Code Lock No .
Logo PIN Code Lock No .
Factory default set No: 4 3 2 1*
While the projector is locked with the PIN code....
Put  the  label  below  (supplied)  on  in  a  prominent  place  of the projector's body while it is locked with a PIN code.
Appendix 
						

							
KK7ACSANyO Electric Co ., Ltd .