Home > Sanyo > Projector > Sanyo Projector Plc Wxu700a User Manual

Sanyo Projector Plc Wxu700a User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Sanyo Projector Plc Wxu700a User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    41
    
    Video Input
    Choose Computer  1 by  pressing  the  INPUT  button  on  the  top  control  or  press  the  COMPUTER  button  on  the 
    remote control; choose HDMI by pressing the INPUT button on the top control or press the HDMI button on the 
    remote control. 
    Before  using  these  buttons,  correct  input  source  should  be  selected  through  Menu  operation  as  described 
    below.
    1
    Input Menu
    Use the Point ▲▼ buttons to select Computer 1 and 
    then press the Point ► button; use the Point ▲▼ 
    buttons to select HDMI, and then press the SELECT 
    button.
    Input Source Selection (Component, RGB Scart 1-pin, HDMI)
    When the input source is coming from video 
    equipment connected to the COMPUTER 
    IN 1/COMPONENT IN terminal with a 
    Component-VGA Cable, select Component. 
    Component
    When the input source is coming from video 
    equipment connected to the COMPUTER 
    IN 1/COMPONENT IN terminal with a Scart-
    VGA Cable, select RGB (Scart). 
    RGB (Scart)
    Direct Operation
    Menu Operation
    Press the MENU button to display the On-Screen 
    Menu. Use the Point ▲▼ buttons to select Input and 
    then press the Point ► or the SELECT button. 
    Note: 
      • 
    Network is for the Network function. See the owner’s manual of “Network Set-up and Operation” .
      • When the Input Search function is set to 
    On1 or  On, 
    the input signal will be searched automatically (p.48).
    COMPUTER button
    Top ControlINPUT button
    Remote Control
    3When Computer 1 is selected, use the Point ▲▼ 
    buttons to select Component or RGB(Scart) and then 
    press the SELECT button.
    Computer 1
    Computer  
    When  the  video  signal  is  connected  to  the 
    HDMI terminal, select HDMI.HDMI
    HDMI button
    HDMI
    Computer 1
    HDMI
    Computer  
    S-video
    Network
    Video
     COMPUTER  can not be selected when using the COMPUTER IN 2/     MONITOR OUT terminal as MONITOR OUT output. 
    						
    							
    4
    
    Video Input
    Video System Selection
    1AV System Menu (Video or S-video)
    AV System Menu (Component)
    
    If the projector cannot reproduce proper video image, 
    select a specific broadcast signal format from among PAL, 
    SECAM, NTSC, NTSC 4 .43, PAL-M and PAL-N.
    PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
    The projector automatically detects an incoming video 
    signal, and adjusts itself to optimize its performance.
    If the projector cannot reproduce proper video image, select 
    a specific component video signal format among 480i, 575i, 
    480p, 575p,
     70p, 1035i and 1080i.
    Auto
    COMPONENT VIDEO SIGNAL FORMAT
    Video or S-video
    Component
    The projector automatically detects an incoming video 
    system, and adjusts itself to optimize its performance.
    When Video System is PAL-M or PAL-N, select the system 
    manually.
    Auto
    Note:
    The AV System Menu cannot be selected when selecting 
    RGB (Scart).
    HDMIVideoS-videoNetwork                                       Wired 1
    Video
    Component
    Press the MENU button to display the On-Screen 
    Menu.  Use the Point ▲▼ buttons to select Input and 
    then press the Point ► or the SELECT button. 
    Use the Point ▲▼ buttons to select Video , S-video 
    or Computer 1(Component) and then press the 
    SELECT button.
    3Use the Point ▲▼ buttons to select System and then 
    press the Point ► or SELECT button. Use the Point ▲
    ▼ buttons to select the desired system and then press 
    SELECT button. 
    						
    							
    43
    
    Image Select Menu
    Select the desired image mode among Dynamic, Standard, 
    Cinema, Blackboard (Green), Colorboard, Image 1, 
    Image 
    , Image 3 and Image 4 by pressing the IMAGE 
    button on the remote control.
    Standard
    Picture mode adjusted with fine tone.
    Cinema
    Blackboard (Green)
    Image 1–4
    IMAGE button
    Dynamic
    Cinema
    Image Mode Selection 
    Blackboard (Green)
    Dynamic
    Standard
    Remote Control
    IMAGE button
    Direct Operation
    For viewing pictures in a bright room.
    Normal picture mode preset on the projector.
    For viewing with the user preset image mode in the Image 
    adjust Menu (see pages 44-45). This Image memory is 
    provided in each computer, component and video input 
    source.
    1
    
    Menu Operation
    Image 1
    Image 
    Image 3
    Image 4
    Colorboard
    Colorboard
    Use the Point ▲▼ buttons to select Colorboard and then 
    press the Point ► or the SELECT button. Use the Point 
    ▲▼ buttons to select the desired item and then press the 
    SELECT button.
    At the time of simple projection on the colored wall, you
    can get the close color image to the color image projected
    on a white screen by selecting the similar color to the wall
    color from the preset four colors.
    Press the MENU button to display the On-Screen Menu. 
    Use the Point ▲▼ buttons to select Image select and 
    then press the Point ► or the SELECT button.
    Use the Point ▲▼ buttons to select the desired item 
    and then press the SELECT button.
    Video Input
    For the image projected on a blackboard.
    This mode helps enhance the image projected on a 
    blackboard. This is mainly effective on a green colored 
    board, not truly effective on a black colored board. 
    						
    							
    44
    
    Video Input
    Image Adjustment
    1
    
    Press the Point ◄ button to decrease the contrast; press the 
    Point ► button to increase the contrast (from 0 to 63).
    Press the Point ◄ button to decrease the brightness; press  
    the Point ► button to increase the brightness (from 0 to 63).
    Contrast
    Brightness
    Press the Point ◄ button to lighten red tone; press the Point 
    ► button to deepen red tone (from 0 to 63).
    White balance (Red)
    Press the Point ◄ button to lighten green tone; press the 
    Point ► button to deepen green tone (from 0 to 63).
    White balance (Green)
    Press  the  Point ◄  button  to  lighten  blue  tone;  press  the 
    Point ► button to deepen blue tone (from 0 to 63).
    White balance (Blue)
    Use the Point ◄► buttons to select the desired Color temp. 
    level (XLow, Low, Mid or High ). 
    Color temp .
    Press the Point ◄ button decrease the intensity of the color; 
    press the Point ►button increase the intensity of the color 
    (from 0 to 63).
    Press the Point ◄► buttons to adjust the tint value to get a 
    proper color balance (from 0 to 63).
    Color
    Tint
    Note:
      •  When
     White balance Red, Green or Blue is adjusted, the Color temp. level will change to User.
      • 
    Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.42).
     •  When 
    Blackboard(Green) or Colorboard is selected in Image select,  Color temp . will change to   
       Blackboard or Colorboard.
    Image adjust Menu
    ResetStore
    Selected Image mode
    Press the MENU button to display the On-Screen 
    Menu. Use the Point ▲▼ buttons to select Image 
    adjust and then press the Point ► or the SELECT 
    button.
    Use the Point ▲▼ buttons select the desired item 
    and then press the SELECT button to display the 
    adjustment dialog box. Use the Point ◄► buttons to 
    adjust the setting value.
    ResetStore
    Use the Point ◄► 
    buttons to adjust the 
    setting value. 
    						
    							
    45
    
    Video Input
    Use  the  Point ◄►  buttons  to  adjust  the  gamma  value  to 
    obtain a better balance of contrast (from 0 to 15).
    Gamma
    Press the Point ◄ button to decrease the sharpness of the 
    image; press the Point ► button to increase the sharpness 
    of the image (from 0 to 15).
    Sharpness
    An interlaced video signal can be displayed in progressive 
    mode. Select one of the following options.
     Off .........  Disabled.
     L1  ..........  For an active picture.
      L  ..........  For a still picture.
     Film  .......  For watching a film. With this function, the 
    projector reproduces pictures faithful to the 
    original film quality.
    Progressive
    Noise reduction
    Noise interference on the screen can be reduced. Select 
    one of the following options to get smoother images.
     Off  .........  Disabled.
     L1  ..........  Lower reduction.
      L  ..........  Higher reduction.
    Note: 
        
    Noise reduction and Progressive cannot be selected 
    when 480p, 575p, 70p, 1035i or 1080i is selected 
    (p.42).
    To reset the adjusted data, select Reset and press the Point 
    ► or the SELECT button. A confirmation box appears and 
    then select  yes. All adjustments will return to their previous 
    figures. 
    Reset
    Store
    To store the adjusted data, select Store and press the 
    SELECT button. Use the Point ▲▼ buttons to select one 
    from Images 1 to 4 and press the SELECT button. 
    A confirmation box appears and then select  yes. Stored 
    data can be called up by selecting an Image (1-4) in the 
    Image Mode Selection on page 43.
    A confirmation box 
    appears and then 
    select  yes.
    Store Menu 
    						
    							
    46
    
    Video Input
    This projector has the picture screen resize function, which enables you to customize the image size.
    Normal
    Screen Size Adjustment
    Screen Menu1
    
    Provide the image to fit the screen size while maintaining
    the aspect ratio of input signal.
    Custom
    Adjust the screen scale and position manually with this 
    function.
    Press the Point ► button at Custom and the Custom is
    displayed on the screen, you can use the Point ▲▼ buttons
    to choose the item you want to adjust.
     Scale H/V ..........  Adjust the Horizontal/Vertical screen 
    scale.
     H&V  ...................  When set to On, the aspect ratio is fixed. 
    Scale V appears dimmed and becomes 
    unavailable. Adjust the Scale H, then the 
    screen scale is automatically modified 
    based on the aspect ratio. 
     Position  H/V.....Adjust  the  Horizontal/Vertical  screen 
    position.
     Common  ...........  Save the adjusted scale to all the inputs. 
    Press the SELECT button at Common 
    to display a confirmation box. To save 
    the scale, press the SELECT button 
    at  yes, When Custom is selected, the 
    saved scale is used.
     Reset  .................  Reset the all adjusted values. Press 
    the SELECT button at Reset to display 
    a confirmation box. To reset, press the 
    SELECT button at  yes.
    Note:
      • When no signal is detected, 
    Normal is 
    set automatically and the Aspect dialog 
    box disappears.
      • The adjustable range for 
    Scale H/V and 
    Position H/V is limited depending on the 
    input signal.
      • 
    Wide, Zoom and Natural wide cannot 
    be operated when  70p, 1035i or 1080i 
    is selected in the AV System Menu 
    (p.42).
    Wide
    Provide the image at the 16:9 wide screen ratio.
    Press the MENU button to display the On-Screen 
    Menu. Use the Point ▲▼ buttons to select Screen and 
    then press the Point ► or SELECT button
    Use the Point ▲▼ buttons select the desired item and 
    then press the SELECT button.
    Full 
    Provide the full screen image. 
    Zoom
    Pan the horizontal direction of the image and cut the vertical
    direction of the image to fit the screen size (16:9). Only for
    4:3 video aspect ratio signals.
    Natural wide
    Modify the 4:3 aspect ratio image to fit the screen size(16:9
    aspect ratio) by stretching the image to make it look natural. 
    						
    							
    47
    
    HDMI setupTerminal                                                        Computer 2Pointer                                                          DotStandby mode                                               Eco
    
    Language
    The language used in the On-Screen Menu is available in 
    English, German, French, Italian, Spanish, Portuguese, 
    Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, 
    Russian, Chinese, Korean, japanese and Thai.
    Setting Menu
    Setting
    Setting
    HDMI setupTerminal                                                        Computer 2Pointer                                                          DotStandby mode                                               Eco
    Press the MENU button to display the On-Screen 
    Menu.  Press the Point ▲▼ buttons to select Setting 
    and press the Point ► or the SELECT button to access 
    the submenu items.
    1
    Use the Point ▲▼ buttons to select the desired item 
    and then press the Point ► or the SELECT button to 
    access the selected item.
    This projector has a Setting menu that allows you to set up 
    the other various functions described below.
    Language
    Menu position
    This function is used to change the position of the 
    On-Screen Menu. Select Menu position and press the 
    Point ► or the SELECT button. The Menu position screen 
    appears. 
    The Menu position changes each time you press SELECT 
    button as follows.
    the top left   the top right   the center  the bottom left 
     the bottom right  the top left  .....
    3Use the Point ▲▼ buttons to select the desired item 
    and then press the SELECT button. 
    						
    							
    48
    
    Setting
    Note:
     • Auto Keystone corrects vertical distortion only, not 
    correct horizontal distortion.
      • The 
    Auto Keystone function cannot work when the 
    Ceiling feature is set On in the Setting menu (p.53).
      • Perfect correction of the image distortion cannot 
    be ensured with the Auto setup function. If the 
    distortion is not corrected properly by pressing the 
    AUTO SETUP/CANCEL button, adjust manually 
    by pressing the KEYSTONE button on the remote 
    control or selecting Keystone in the Setting menu 
    (pp.26,49).
      • 
    Fine sync, Total dots, Horizontal and Vertical 
    position of some computers cannot be fully adjusted 
    with the Auto PC adjustment function. When the 
    image is not provided properly with this operation, 
    manual adjustments are required (pp.34-35).
    Auto setup
    Input search
    This function detects the input signal automatically. When 
    a signal is found, the search will stop. Use the Point ▲▼ 
    buttons to select one of the following options.
    Off  ......Input search will not work.
    On1  ....Input search works under the following situation.
      – When pressing the AUTO SETUP
    /CANCEL 
    button on the top control.
      – When pressing the 
    AUTO SET/CANCEL button 
    on the remote control.
    On  ....
    Input search works under the following situation.
      – When turning on the projector by pressing the 
    ON/STAND-BY button on the top control or the 
    remote control.
      – When pressing the 
    AUTO SET/CANCEL button 
    on the remote control.
      – When pressing the AUTO SETUP
    /CANCEL 
    button on the top control.
      –  When the current input signal is cut off.*
    * If the No show or Freeze function is active, cancel it to 
    activate the Input search. It is also unavailable when On-
    Screen menu is displayed.
    Auto PC adj .
    On. . . . . .  Enables Auto PC adjustment when pressing       
                       the AUTO SET/CANCEL button on the remote 
                       control or the AUTO SETUP/CANCEL button 
                       on the top control.
    Off. . . . . .  Disables Auto PC adjustment.
     Auto Keystone 
    Auto . . . .   Always works and corrects keystone 
    distortion according to the projector's tilt.
    Manual  . .  Works only when pressing the AUTO SETUP/
    CANCEL button on the top control or the 
    AUTO SET/CANCEL button on the remote 
    control.
    Off. . . . . .  Disables Auto Keystone.
    HDMI setupTerminal                                                        Computer 2Pointer                                                           DotStandby mode                                               Eco
    Auto setup
    Note:
      •While Input search is set to On1 or  On, the status of Input 
    and Lamp are displayed every time the signal is switched.
      •Only the last selected input source can be detected.
      •If the INPUT button on the top control or the  HDMI, 
    COMPUTER, VIDEO or NETWORK buttons on the remote 
    control is pressed during Input search is in progress, Input 
    search will stop and go back to the previous input signal.
      • Input  search,  Auto  PC  adj  .  and  Auto  Keystone
      cannot  be 
    set Off at the same time. 
    This function enables Input search, Auto Keystone correction 
    and Auto PC adjustment by pressing the AUTO SETUP/
    CANCEL button on the top control or the AUTO SET/CANCEL 
    button on the remote control. Settings for those functions can 
    be altered as follows: 
    						
    							
    49
    
    Keystone
    This function is used to store or reset the keystone 
    correction when the AC power cord is unplugged.
     Store .......  Keep the keystone correction even when the 
    AC power cord is unplugged.
     Reset  .......  Release the keystone correction when the AC 
    power cord is unplugged.
    To correct keystone distortion, press the SELECT button. 
    Keystone appears on the screen. Use the Point ▲▼ 
    buttons to correct keystone distortion (p.26).
    Background
    Select the background screen for when no input signal is 
    detected. Press the Point ▲▼ buttons to switch between 
    each option.
     Blue . . .  Blue colored background.
     User. . .  The image you captured.
     Black  . .  Black colored background.
    This function decides whether to display On-Screen 
    Displays.
     On  ...........................  Show all the On-Screen displays. 
    Use this function when you want 
    to project images after the lamp 
    becomes bright enough. The factory 
    default setting is in this option.
     Countdown Off.......  Show the input image instead of 
    the countdown when turning on the 
    projector. Use this function when you 
    want to project the image as early as 
    possible even when the lamp is not 
    bright enough.
     Off  ...........................  Hide the On-Screen Displays except;
        ● On-Screen Menu
        ● 
    Power off? (p.23)
        ● 
    No signal for Power management  
       (p.56)
        ● Please wait  . . .
        ● Arrows for the True function in the  
                                            Screen Menu (p.38)
                                         ●  P-Timer
    Display
    Setting
    HDMI setupTerminal                                                        Computer 2Pointer                                                          DotStandby mode                                               Eco
    Keystone 
    						
    							
    50
    
    Setting
    Logo (Logo and Logo PIN code lock settings)
    HDMI setupTerminal                                                        Computer 2Pointer                                                          DotStandby mode                                               Eco
    Logo select
    This function allows you to customize the screen logo with 
    Logo select, capture, Logo PIN code lock and Logo PIN 
    code change functions.
    Note:
        When 
    On is selected in the Logo PIN code lock function, 
    Logo select, capture and Logo PIN code change 
    cannot be selected.
    Logo select
    This function decides on the starting-up display from 
    among following options. 
     User  ........  Show the image you captured. 
     Default  ....  Show the factory-set logo. 
     Off  ...........  Show the countdown display only.
    Off
    Off 
    						
    All Sanyo manuals Comments (0)

    Related Manuals for Sanyo Projector Plc Wxu700a User Manual