Sanyo Projector Plc Wxu300 User Manual

51

Setting
Picture in PictureThis function is used to project two videos simultaneously
by placing a separate small sub screen within the main
screen. (Picture in Picture combinations provided in this 
projector are shown on pages 75.)
Only the sound on the main picture is heard, the sound
on the sub picture cannot be heard.( In P in P, the big 
picture is main picture, and the small one is sub picture; in P 
by P, the left picture is main picture, and the right one is sub 
picture.)
  Mode. . . . . P...

5

Setting
Power management
Timer	left	before	Lamp	is	off.
Power management
For	reducing	power	consumption	as	well	as	maintaining	
the	lamp	life,	the	Power	management	function	turns	off	the	
projection	lamp	when	the	projector	is	not	operated	for	a	
certain	period.
Select	one	of	the	following	options:
Ready	.................. 	When	the	lamp	has	been	fully	cooled	
down,	the	POWER	indicator	changes	
to	green	blinking.	In	this	condition,	the	
projection	lamp	will	be	turned	on	if	the	
input	signal	is...

53

Setting
On start
When	this	function	is	set	to On,	the	projector	will	be	
automatically	turned	on	just	by	connecting	the	 AC	power	
cord	to	a	wall	outlet.	
Note:
•	 Be	sure	to	turn	off	the	projector	properly	(see	"Turning	Off	
the	Projector"	on	page	20).	If	the	projector	is	turned	off	
in	the	incorrect	sequence,	the	On	start	function	does	not	
work	properly.
•	 On	start	function	is	available	only	when
 Network 	is	
selected	in	Standby	mode	function.	(p.52)
On start 

54

Press	the	Point	▲▼	buttons	to	
select	
Off ,	CC1 ,	CC ,	CC3	or	CC4,	
and	then	Press	Select	button.
Setting
Closed caption
Closed	caption	is	a	printed	version	of	the	program	sound	or	
other	information	displayed	on	the	screen.	If	the	input	signal	
contains	closed	captions,	you	can	turn	on	the	feature	and	
switch	the	channels.	Press	 the	Point	▲▼	buttons	to	select	
Off,	CC1 ,	CC ,	CC3	or	CC4.		
If	the	closed	caption	is	not	clear,	you	can	change	the	text	
from	
Color 	to	White.
Closed...

55

Remote control
This	function	allows	you	to	change	brightness	of	the	
screen.
Normal	...... 	Normal	brightness	
Eco 	............ 	Lower	brightness	reduces	the	lamp	
power	consumption	and	extends	the	
lamp	life.
Lamp control 
Remote control
Lamp life control
This	projector	provides	two	different	remote	control	codes:	
the	factory-set	initial	code	(Code	1)	and	the	secondary	code	
(Code	2).	 This	switching	function	prevents	remote	control	
interference	when	operating	several	projectors	or	video...

56

Key lock
Key lockSecurity (Key lock and PIN code lock)
PIN code lock
This	function 	locks 	the 	top 	control 	and 	remote 	control	
buttons	to	prevent	operation	by	unauthorized	persons.
Select	
Key lock 	and	 then	 press	 the	SELECT 	button,	 and	
select	the	desired	item	by	pressing	the	Point	
▲▼	buttons.
	 .....	Unlocked.
	 ..... 	Lock	the	operation	of	the	top	control.	 To	
unlock,	use	the	remote	control.
	 ..... 	Lock	the	operation	of	the	remote	control.				
To	unlock,	use	the	top	control.
If	 the...

57

Use	the	Point	▲▼	buttons	to	select	Off,	On1 	or	On ,	and	
then	press	the	SELECT 	button	to	make	a	choice.
Change the PIN code lock setting
Enter a PIN code
Use	the	Point	▲▼	buttons	 to	enter	 a	number.	 Press	the	
Point	
►	 button	 to	fix	 the	 number	 and	move	 the	red	 frame	
pointer	 to	the	 next	 box.	The	number	 changes	 to	“
”.	 If	
you	 fixed	 an	incorrect	 number,	use	the	Point	
◄	button	 to	
move	 the	pointer	 to	the	 number	 you	want	 to	correct,	 and	
then	enter	the	correct	number....

58

This	function	 provides	 the	following	 options	in	the	 cooling	
fans’ 	operation	when	the	projector	is	turned	off	(p.20).
	L1	...... 	Normal	operation
	L 	...... 	S l o w e r 	a n d 	l o w e r - s o u n d 	t h a n 	t h e 	n o r m a l	
operation	 (
L1),	but	 it	takes	 more	time	to	cool	 the	
projector	down.
Fan
This	projector	provides	Fan	control	function	in	the	Setting	
menu.
Choose	the	running	speed	of	cooling	fans	from	the	following	
options	according	to	the	ground	elevation	under	which	you...

5

Factory default
This	function	returns	all	setting	values	except	for	the	User 
logo,	PIN code lock ,	Logo PIN code lock ,	Lamp counter	
and	
Filter counter 	to	the	factory	default	settings.
Factory default
WARNING log
This	function 	records 	anomalous 	operations 	while 	the	
projector	 is	in	 operation	 and	use	it	when	 diagnosing	 faults.	
Up	 to	10	 warning	 logs	are	displayed	 with	the	latest	 warning	
message	 at	the	 top	of	the	 list,	 followed	 by	previous	 warning	
messages	in...

60

Input Source Information Display
The Information Menu is used for checking the status of the image signal\
 being projected and the operation of the projector.
H-sync freq.
V-sync freq.
Lamp counter
Information Menu
The horizontal frequency of the input signal is displayed in 
KHz, or - - - - - when no signal.
The vertical frequency of the input signal is displayed in Hz, 
or - - - - -  when no signal. Numbers of Hz doubles when 
during Interlace.
The cumulative lamp operating time is displayed....