Sanyo Projector Plc Wl2503 User Manual

71
Appendix
Compatible Computer Specifications
Basically	this	projector	can	accept	the	signal	from	all	computers	with	the	V-,	H-Frequency	mentioned	below	
and	less	than	140	MHz	of	Dot	Clock.
		When	selecting	these	modes,	PC	adjustment	can	be	limited.
 Note:
				The	specifications	are	subject	to	change	without	notice.
Appendix
ON-SCREEN DISPLA yRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)VGA	1640	x	48031.4759.88
VGA	2720	x	40031.4770.09
VGA	3640	x	40031.4770.09
VGA	4640	x	48037.8674.38
VGA	5640	x	48037.8672.81...

72
Appendix
Note:
•	The	specifications	are	subject	to	change	without	notice.
•	Depending	on	your	PC	settings,	the	digital	signals	of	your	PC	may	not	be	projected	correctly.	In	such	a	case,	
		confirm	your	PC	settings.
•	When	you	project	a	DVI	signal,	connect	the	cables,	turn	the	projector	on,	then	select	the	input.	Finally,	turn	
		on	your	PC.	Be	sure	to	follow	this	procedure,	otherwise	an	image	may	not	be	projected	on	the	screen.	If	an	
		image	is	not	projected	correctly,	restart	your	PC.
•	Do	not...

73
Technical Specifications
Mechanical Information  
	 Projector	Type	 Multi-media	Projector 
	 Dimensions	(W	x	H	x	D)	 13.78	x		5.10"	 x		15.03"	(	350.0mm	x	129.4mm	x	381.9mm	)	(Not	including	protrusions) 
	 Net	Weight	10.1	lbs	(4.6kg)  
			Feet	Adjustment																																																0˚	to	10˚	 	 	 	 	
Panel Resolution  
	 LCD	Panel	System	0.59"	TFT	Active	Matrix	type,	3	panels	 
	 Panel	Resolution	 1,280	x	800	dots 
	 Number	of	Pixels	3,072,000	(1,280	x	800	x	3	panels)...

74
Appendix
     Model	No.
SCART-VGA Cable                                 :	POA-CA-SCART 
COMPONENT-VGA Cable     : POA-CA-COMPVGA
VGA-Cable (10 m)                                  :	KA-MC-DB10 
TERMINAL COVER                                :	POA-TC-WL2500
The	parts	listed	below	are	optionally	available.	When	ordering	those	parts,	specify	the	item	name	and	Model	No.	to	the	sales	
dealer.
Optional Parts
The Terminal Panel Replacement

Fig. 1
Fig. 2
Fig. 3
Terminal Cover  Attachment
Five(5) screws
T...

75
COMPUTER IN 1 /COMPONENT IN 
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red	(R/Cr)	Input
Ground	(Horiz.sync.)
Green	(G/Y)	Input
	-----
Blue	(B/Cb)	Input
Ground	(Red)
Ground	(Green)
Ground	(Blue)
1
5
2
4
3
6
7
8
5V	Power
Horiz.	sync.	Input	(Composite	H/V	sync.)
Ground	(Vert.sync.)
DDC	Data
Ground	
Vert.	sync.
DDC	Clock
9
13
10
12
11
14
15
RX	–
TX	+
TX	–
RX	+
2
3
4
87654321
5
6
7
8
1
LAN TERMINAL
-----
-----
-----
-----
CONTROL PORT CONNECTOR (D-sub 9...

76
Write	down	the	PIN	code	number	in	the	column	below	and	keep	it	with	this	manual	securely.	If	you	forgot	or	lost	
the	number	and	unable	to	operate	the	projector,	contact	the	service	center.	
PIN Code Number Memo
Factory	default	set	No:		1	2	3	4*
Factory	default	set	No:		4	3	2	1*
Put	the	label	 below	 (supplied)	 on	in	a	prominent	 place	of	the	
projector's	body	while	it	is	locked	with	a	PIN	code.
While	the	projector	is	locked	with	the	PIN	code.
PIN Code Lock No .
Logo PIN Code Lock No .
*Should...

77
Dimensions
Appendix
6.56(166.7)6.29(159.8)
0.55(14)1.14(29)1.46(37.1)
2.51(63.8)5.65(143.5)
0.70(17.8) 0.34(8.7)
4.53(115) 3.54(90)
6.77(172)
3.94(100)
1.65(42)
7.09(180)
4.33(110) 7.53(191.3)
5.60(142.2)
5.46(138.7)
15.11(383.8)
13.78(350)
10.94(277.8)
0.56(14.2)
0.72(18.3)
2.76(70) 7.09(180)
Unit:	inch(mm)
Screw	Holes	for	Ceiling	MountScrew:	M5Depth:	0.394(10.0)
This	projector	is	compliant	with	PJLink	Standard	Class	1	of	JBMIA 	(Japan	Business	Machine	and	Information	System	
Industries	Association)....

KJ8AE