Sanyo Projector Plc Wl2503 User Manual

31
PC adjust Menu
Manual PC adjustment
Some	computers	employ	special	signal	formats	which	may	not	be	tuned	by	Multi-scan	system	of	this	projector.		
Manual	PC	adjustment	enables	you	to	precisely	adjust	several	parameters	to	match	those	signal	formats.	The	
projector	has	five	independent	memory	areas	to	store	those	parameters	manually	adjusted.	It	allows	you	to	
recall	the	setting	for	a	specific	computer.	
1
2
Use	the	Point	◄►	buttons	to	adjust	the	value,	eliminating	a	
flicker	from	the	image	displayed...

32
Store
To	store	the	adjusted	data,	select	Store	and	then	press	the	
Point	►	or	the	SELECT	button.	Move	the	highlight	to	one	
of	the	Modes	1	to	10	in	which	you	want	to	store,	and	then	
press	the	SELECT 	button.
Mode free
To	clear	the	stored	data,	select	Mode free	and	then	press	
the	Point	►	or	the	SELECT	button.	Move	the	highlight	to	the	
Mode	that	you	want	to	clear	and	then	press	the	SELECT 	
button.
Note:
	 •	Display area (H/V) can	not	be	selected	when	480i,	
575i,	480p,	575p,	720p,	1035i,	or	1080i...

33
HDMI
ASPECT
Image Select Menu
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Image Mode Selection 
Image 4
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select	the	desired	 image	mode	 among	Dynamic,	Standard,	
Real,	Blackboard (Green),	Colorboard,	Image 1,	Image 2,	
Image 3,	and	Image 4	by	 pressing	 the	IMAGE	 button	on	the	
remote	control.
Standard
Picture	mode	with	improved	halftone	for	graphics.
Real
Blackboard (Green)
Image 1- 4
For	the	image	projected	on	a	blackboard.
This	mode...

34
Image adjust Menu
Image Adjustment
Reset
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	▲▼	buttons	to	select	Image 
adjust	and	then	press	the	Point	► or	the	SELECT	 
button.
1
2Use	the	Point	▲▼	buttons	select	the	desired	item	
and	then	press	the	SELECT 	button	to	display	the	
adjustment	dialog	box.	Use	the	Point	◄►	buttons	to	
adjust	the	setting	value.
Note:
•	When	White	balance Red,	Green	or	Blue	is		
		adjusted,	Color temp .	will	change	to	User.
•	When	Blackboard(Green)	or...

35
Store
This	projector	has	the	picture	screen	resize	function,	which	
enables	you	to	customize	the	image	size.
Screen Menu
Provide	the	image	to	fit	the	screen	size	while	maintaining	
the	aspect	ratio	of	input	signal.
Normal
True
Full 
Provide	the	full	screen	image.	
1
2
To	store	the	adjusted	data,	select	Store	and	press	the	Point	
►	or	the	SELECT	button.	Use	the	Point	▲▼	buttons	to	
select	one	from	Image 1	to	4	and	press	the	SELECT 	button.	
A	confirmation	box	appears	and	then	select	yes.	Stored	
data...

36
Select	Digital zoom +.	The	On-Screen	Menu	disappears	
and	D . zoom +	appears.	Press	the	SELECT 	button	to	
expand	the	image	size.	Use	the	Point	▲▼◄► buttons	to	pan	
the	image.	The	Panning	function	can	work	only	when	the	
image	is	larger	than	the	screen	size.
A	projected	image	can	be	also	expanded	by	pressing	the	
D.ZOOM	▲	or	the	SELECT 	button	on	the	remote	control.	
To	exit	the	Digital	zoom	+/–	mode,	press	any	button	except	
the	D.ZOOM	▲▼	and	the	SELECT 	buttons.
Digital zoom +
Select	Digital zoom -....

37
Choose	Video	or	S-video	by	pressing	the	VIDEO	button	
or	the	S-VIDEO	button	on	the	remote	control	or	press	the	
INPUT	button	on	the	top	control.	
Before	using	these	buttons,	correct	input	source	should	be	
selected	through	Menu	operation	as	described	below.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
When	video 	input 	signal 	is 	connected 	to 	the	
VIDEO	jack,	select	Video.Video
When	 video	input	signal	 is	connected	 to	the	 S-
VIDEO	jack,	select	S-video.S-video
Note:...

38
Choose	Computer 1(Component) or	Computer 1(Scart) 
by	pressing	the	the	COMPONENT	or	COMPUTER	1	button	
on	the	remote	control	or	press	the	INPUT 	button	on	the	top	
control;	choose	HDMI by	pressing	the	HDMI	button	on	the	
remote	control	or	press	the	INPUT	button	on	the	top	control.	
Before	using	these	buttons,	correct	input	source	should	be	
selected	through	Menu	operation	as	described	below.
1
Input Menu
2Use	the	Point	▲▼	buttons	to	select	Computer 1	and
then	press	the	Point	►	button;	use	the	Point	▲▼...

39
Video System Selection
1AV System Menu (Video or S-video)
AV System Menu (Component)
2
If	the 	projector 	can 	not 	reproduce 	proper 	video 	image,	
select	 a	specific	 broadcast	 signal	format	 from	among	PA L,	
SECAM,	NTSC,	NTSC 4 .43,	PAL-M,	and	PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The	projector 	automatically 	detects 	an 	incoming 	video	
signal,	and	adjusts	itself	to	optimize	its	performance.
If	 the	 projector	 can	not	reproduce	proper	 video	image,	 select	
a	specific	component	video...

40
HDMI
ASPECT
Image select Menu
Select	the	desired	image	mode	from	among	Dynamic,	
Standard,	Cinema,	Blackboard (Green),	Colorboard,	
Image 1,	Image 2,	Image 3,	and	Image 4	by	pressing	the	
IMAGE	button	on	the	remote	control.
Standard
Picture	mode	adjusted	with	fine	tone.
Cinema
Blackboard (Green)
Image 1-4
IMAGE button
Dynamic
Cinema
Image Mode Selection 
For	the	image	projected	on	a	blackboard.
This	mode	helps	enhance	the	image	projected	on	a	
blackboard.	This	is	mainly	effective	on	a	green	colored...