Sanyo Projector Plc Su40 User Manual

Multimedia Projector 
MODELPLC-SU40
Owner’s Manual 

2
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).  NO USER-
SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT.  REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
OWNERS MANUAL WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before operating this projector, read this...

3
SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

4
COMPLIANCES
AC Power Cord for the United Kingdom :
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of
the plug.  Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating,
marked thus  .  If the fuse cover is detachable, never use the plug with the cover omitted.  If a replacement fuse
cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or...

5
TABLE OF CONTENTS
FEATURES AND DESIGN 6
BEFORE OPERATION 14COMPUTER INPUT(RGB Scart 21-Pin Video Input)22
VIDEO INPUT 31
SETTING 36
APPENDIX 38 PREPARATION 7
NAME OF EACH PART OF PROJECTOR 7
SETTING-UP PROJECTOR 8
CONNECTING AC POWER CORD 8
POSITIONING PROJECTOR 9
ADJUSTABLE FEET 9
INSTALLING PROJECTOR IN PROPER POSITION 10
MOVING PROJECTOR 10
CONNECTING PROJECTOR 11
TERMINALS OF PROJECTOR 11
CONNECTING TO COMPUTER 12
CONNECTING TO VIDEO EQUIPMENT 13
OPERATION OF REMOTE CONTROL 14
LASER POINTER...

6
FEATURES AND DESIGN
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.  This
projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)
technology.
Compatibility
This projector widely accepts various video and
computer input signals including;
Computers
IBM-compatible or Macintosh computer up to 1280
x 1024 resolution.
6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M...

7
PREPARATION
NAME OF EACH PART OF PROJECTOR
BOTTOM
BACK
CAUTION
Hot air is exhausted from the exhaust
vents.  When using or installing the
projector, the following precautions
should be taken.
Do not put any flammable objects near
these vents.
Keep front grills at least 3’(1m) away
from any objects, especially heat-
sensitive objects.
Do not touch this area, especially
screws and metallic part.  This area will
become hot while the projector is used.
This projector detects internal
temperature and...

NOTE ON THE POWER CORD
AC Power Cord must meet requirement of the country where you use a projector.
Confirm an AC plug type with the chart below and proper AC Power Cord must be used.
If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
SETTING-UP PROJECTOR
8
PREPARATION
To POWER CORD
CONNECTOR on your
projector.
Projector sideAC Outlet side
Ground
To the AC Outlet.
(120 V AC)
For Continental EuropeFor the U.S.A. and Canada
This projector uses nominal input voltages of...

9
PREPARATION
POSITIONING PROJECTOR
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating
ADJUSTABLE FEET.  Projection angle can be adjusted up to 15.6
degrees. 
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector.1
ADJUSTABLE FEET
FEET LOCK
LATCHES
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to
adjust the position and tilt. 2
To retract the ADJUSTABLE FEET, lift the front of the
projector and...

10
PREPARATION
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or bump the projector, otherwise damages or malfunctions may result.
When carrying the projector, use a suitable carrying case.
Do not transport the projector by using a courier or transport service in an unsuitable transport case.  This may cause
damage to the projector.  To transport the projector through a courier or transport service, consult your dealer for best
way.
MOVING PROJECTOR
CAUTION
Carrying Bag (supplied) is...