Home > Sanyo > Projector > Sanyo PLC Xt35 Projector User Manual

Sanyo PLC Xt35 Projector User Manual

Here you can view all the pages of manual Sanyo PLC Xt35 Projector User Manual. The Sanyo manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 71

71
Appendix
Menu Tree
Dynamic
RealCinema*Image 1Image 2Image 3
Image
VolumeMuteQuitOn/OffSound0–63
Input
Input 3Auto
Go to  System(3)
Go to System(3)
Video 
Go to System(1)
S-video
Standard
Quit
Input 1
Go to System(3)Video
Go to System(1)Input 2 RGB
Go to System(2)Component
Image 4
RGB (PC Analog)
RGB (Scart)
RGB (PC Digital)
RGB (AV HDCP)
Quit
Quit
SYSTEM(3)SYSTEM(1)
- - - -
Mode 1
Mode 2
XGA 1SECAM
NTSC
Auto
PAL
PAL-M
PAL-N
NTSC4.43
SYSTEM(2)
1035i
720p
Auto
1080i
480p
575i
575p
480i
InputH-sync...

Page 72

72
Appendix
LanguageSetting12 languages provided
Blue/User/Black
Off/Ready/Shutdown
Auto 1/Auto 2/High/Normal/Eco
Code 1–Code 8
Background
Power management
Lamp control
Remote control
Timer (1–30 Min)Quit
Quit
Capture
Logo PIN code change
Logo PIN code lock
Quit
Spotlight/PointerPointerQuit
QuitAuto PC adj.
Total dotsHorizontalVertical
Display area HDisplay area VReset
PC Adjust
Yes/No
Clamp
Current mode
Mode free/Store
Quit
Fine sync0–31
Mode 1
H-sync freq.V-sync freq.Quit
NormalTrueWide
Digital zoom –...

Page 73

73
Appendix
Check the indicators for the projector condition.  
• • • lighting• • • off• • • blinking
Indicators and Projector Condition
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button
to turn on the projector.
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled down
enough and the temperature returns to normal, the POWER indicator
stops blinking and the projector...

Page 74

74
Appendix
––
––
WARNINGFILTER
orange
*When the projection lamp reaches its end of life, the LAMP REPLACE indic\
ator lights yellow. When this indicator lights
yellow, replace the projection lamp with a new one promptly. Reset the l\
amp counter after replacing the lamp. See pages
65–66.
The filter is clogged. Stop using the projector immediately and clean
or replace the filter (see below).
Projector ConditionPOWERgreen
Indicators
W ARNING FILTER indicator
The Filter counter reached a set time. Clean or...

Page 75

75
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V- and H-Frequency mentioned
below and less than 140 MHz of Dot Clock. PC Adjustment is limited when selecting these modes.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC...

Page 76

76
Appendix
ON-SCREENDISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
D-VGA640 x 48031.4759.94
D-480p640 x 48031.4759.88
D-575p768 x 57531.2550.00
D-SVGA800 x 60037.87960.32
D-SXGA 11280 x 102463.9860.02
ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
D-720p1280 x 72045.0060.00
D-1035i1920 x 1035
D-1080i1920 x 1080
D-1080i1920 x 1080
33.7560.00
(Interlace)
33.7560.00
(Interlace)
28.12550.00
(Interlace)
D-XGA1024 x 76843.36360.00
D-SXGA 21280 x 102460.27658.069
D-SXGA 31280 x 102431.6529.8
When an input...

Page 77

77
Appendix
Te chnical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 13.7” x 6.46” x.17.48” (348.1 mm x 164 mm x 444 mm) (Not inc\
luding adjustable feet)
Net Weight 19.2 lbs (8.7 kg)
Feet Adjustment 0˚ to 5.0˚
Panel Resolution
LCD Panel System 1.0” TFT Active Matrix type, 3 panels 
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High...

Page 78

78
Appendix
Model No.
Long Zoom Lens : LNS-T11
Short Fixed Lens : LNS-W11
Long Zoom Lens : LNS-T10
Short Zoom Lens : LNS-W10
Control Cable :POA-MCSRL
Remote Control Cable :POA-CA-RC30
PJ-Net Organizer Plus  II
:POA-PN03
PJ-Net Organizer Plus  IIC
:POA-PN03C
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model
No. to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries...

Page 79

79
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japa\
n Business Machine and Information
System Industries Association). The projector supports all commands def\
ined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
Projector Input
Video
RGB (Scart)
RGB (PC Analog)
Component
RGB
Auto
PJLink Input
VIDEO 1
RGB 2
RGB 1
VIDEO 2
RGB 3
Video
S-video
VIDEO 4
VIDEO 5
VIDEO 3
Input 2
Input 3
PJLink is a registered trademark of JBMIA and pending trademark...

Page 80

80
Appendix
Terminal : Mini DIN 8-PIN
CONTROL PORT CONNECTOR
Vcc
- Data
+ Data
Ground
1
2
3
4
2
34 1
R X D
-----
-----
GND
RTS/CTS
GND
GND
1
2
3
4
5
6
7
8
INPUT 1/ANALOG OUT
Te
rminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red (R/Cr) Input/Output
Ground (Horiz.sync.)
Green (G/Y) Input/Output
-----
Blue (B/Cb) Input/Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
Horiz. sync. Input (Composite H/V sync.)
Ground (Vert.sync.)
Ground/ -----
Vert....
Start reading Sanyo PLC Xt35 Projector User Manual

Related Manuals for Sanyo PLC Xt35 Projector User Manual

All Sanyo manuals