Sanyo PLC Xt35 Projector User Manual

Multimedia Projector 
MODELPLC-XT25/PLC-XT25L*
PLC-XT21/PLC-XT21L*
PLC-XT20/PLC-XT20L*
PLC-XT25K/PLC-XT20K
(*Models without lens.)
Owner’s Manual 

2
Features and Design
◆Compact Design
This projector is designed compact in size and
weight. It is easy to carry and installed anywhere you
wish to use.
◆Functionally Rich
This projector has many useful functions such as lens
shifting, ceiling and rear projection, 360-degree
projection, variety of lens options, etc.
◆Multi-use Remote Control
Use the remote control as wired and wireless, or as a
PC wireless mouse. Eight remote control codes and
selectable pointer shapes are also available.
◆Simple...

3
Table of Contents
Tr ademarks
Each name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective
corporation.
Features and Design  . . . . . . . . . . . . . . . .2
T able of Contents  . . . . . . . . . . . . . . . . . .3
To  the Owner  . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Directions 7
Moving the Projector 8
Cautions in Handling the...

4
To the Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE EXCEPT
LAMP REPLACEMENT. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL
WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Before installing and operating...

5
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time,...

6
Safety Instructions
Openings in the cabinet are provided for ventilation.
To ensure reliable operation of the product and to
protect it from overheating, these openings must not
be blocked or covered. 
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken. 
–Do not put any flammable object or spray can near
the projector, hot air is exhausted from the air
vents.
– Keep the exhaust vent at least 3’ (1 m) away from
any...

7
Safety Instructions
10˚ 10˚
10˚10˚
Do not tilt the projector more than
10 degrees from side to side. In upward projection, do
not tilt the projector over
10 degrees right and left.
Do not put the projector on either
side to project an image. 
10˚
10˚
In downward projection, do
not tilt the projector over
10 degrees right and left.
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project...

8
Safety Instructions
Use the hand grip when moving the projector.
Replace the lens cap and retract the adjustable feet to
prevent damage to the lens and cabinet when carrying. 
When the projector is not in use for an extended period, put
it into a suitable case to protect the projector.
CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
– When carrying the projector, use a suitable carrying
case.
– Do not transport the...

9
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, th\
e value of which is indicated on the pin face of the
plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse\
 must be used of the same rating, marked thus
. If the fuse cover is detachable, never use the plug with the cover omi\
tted. If a replacement fuse cover is required,
ensure it is of the same colour as that visible on the pin face of the p\
lug (i.e. red or orange)....

10
Bottom Back
qFilter
w Speaker
e Lens Release Button
r Top Controls and Indicators
t Maintenance Cover
WARNING: FOR MAINTENANCE USE 
ONLY. DO NOT OPEN.
y Lens Cap
(for PLC-XT25/XT25K/XT21/XT20/XT20K)
!7
!4!6!5
!2
!3
CAUTION
Hot air is exhausted from the exhaust vent.
Do not put heat-sensitive objects near this
side.
u
e
rt
y
Fr ont
! 0o
qw
i✽
o
!1Infrared Remote Receiver (Back)
! 2Terminals and Connectors
! 3Lamp Cover
! 4Power Cord Connector
! 5Optional Parts Attachment
! 6Air Intake Vent
! 7Hand...