Sanyo Plc Xl50a Projector User Manual

61
Appendix
Image is out of focus.
– Adjust focus of the projector (see page 24).
–    Provide  proper  distance  between  the  projector  and  the  projection  screen 
(see page 14).
–    Check the projection window to see if it needs cleaning (see page 57).
–    Moving  the  projector  from  a  cool  to  warm  place  may  result  in  moisture 
condensation  on  the  projection  lens.  If  this  occurs,  leave  the  projector  off 
and wait until condensation evaporates.
–    Projecting  from  excessive...

62
Appendix
The CE Mark is a Directive 
conformity mark of the European 
Community (EC).
The Remote Control does not work.
– Check the batteries.
–    Make sure no obstruction is between the projector and the remote 
control.
–    Make sure you are not too far from the projector when using the remote 
control. Maximum operating range is 11.5’ (3.5 m).
–    Make sure the code of the remote control is conformed to that of the 
projector (see page 51).
–   Unlock the Key lock function for the remote...

63
Appendix
Menu Tree
Mode 1Mode 2SVGA 1 - - - -
Computer Input
✽ Systems  displayed  in  the  System  Menu  var y 
depending on an input signal.
Computer Input/Video Input
Sound
Volume
Mute
Quit
On / Off
Sound0 - 63
Input
Computer 2
VideoAuto
Go to System (3)
Go to System (3)
Video 
Go to System (2) or (3)
✽N/A - - - not applicable
Go to System (1)
Go to System (2)
N/A
S-Video
RGB( Scart )  
Quit
Quit
System (1)
RGBComputer 1
Component
Auto PC Adj.
Total dotsHorizontalVertical
Display area HDisplay area...

64
Appendix
AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard (Green)
Image 1Image 2Image 3
Setting
Image Select
System (2)
System (3)
Image 4
LanguageSetting16 languages provided.
On / OffOn / Countdown off / Off Logo select
On / OffOn / Off
Off
On / OffNormal / Auto / EcoCode 1 / Code 2
Keystone
Blue backDisplayLogo
CeilingRear
Power management
On startLamp controlRemote control
Quit
ReadyShut down
Quit
Timer(1-30 Min)Quit
Factory default
L1 /...

65
Indicators
Projector ConditionPOWER
red/green WARNING TEMP.
red WARNING FILTER
orange LAMP 
REPLACE yellow
The projector is off. (The AC power cord is unplugged.)
The  projector  is  preparing  for  st and-by  or  the  projection  lamp  is 
being  cooled  down. The  projector  cannot  be  turned  on  until  cooling  is 
completed.
The projector is ready to be turned on with the ON/STAND-BY button.
The projector is operating normally.
The projector is in the Power management mode.
Appendix
Check the...

66
The projector is detecting abnormal condition.
Indicators
Projector ConditionPOWER
red/green WARNING TEMP.
red WARNING FILTER
orange LAMP 
REPLACE yellow
The  temperature  inside  the  projector  is  abnormally  high. The  projector 
cannot  be  turned  on. When  the  projector  is  cooled  down  enough  and 
the  temperature  returns  to  normal,  the  POWER  indicator  lights  red 
and  the  projector  can  be  turned  on.  (The  WARNING  indicator  keeps 
blinking.) Check and clean the air...

67
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with th\
e V-, H-Frequency mentioned below 
and less than 140 MHz of Dot Clock.  When selecting these modes, PC adjustment can be limited.
ON-SCREEN DISPLA yRESOLUTION H-Freq.
 
(kHz) V-Freq.
 
(Hz)
VGA1 640x480 31.4759.88
VGA2 720x400 31.4770.09
VGA3 640x400 31.4770.09
VGA4 640x480 37.8674.38
VGA5 640x480 37.8672.81
VGA6 640x480 37.5075.00
VGA7 640x480 43.26985.00
MAC LC13 640x480 34.9766.60...

68
AppendixTechnical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 14.72” x 7.75” x 19.49” (374 mm x 196.8 mm x 495 mm) (Not including Rear leg)
Net Weight 15.9 lbs (7.2 kg)
Feet Adjustment 0˚ to 1.0˚
Panel Resolution
LCD Panel System0.8” P-Si TFT Active Matrix type
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
    SD/HDTV Signal 480i,...

69
Appendix
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
● The specifications are subject to change without notice.
●  LCD panels are manufactured to the highest possible standards.  Even though 99.99% of the pixels are 
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD 
panels.
Model No.
SCART-VGA Cable : POA-CA-SCART
VGA-Cable (10 m) :...

70
Appendix
Terminal : Mini DIN 8-PIN
12345876
SERVICE PORT CONNECTOR
R X D
-----
-----
GND
RTS / CTS
GND
GND
Serial
1
2
3
4
5
6
7
8
COMPUTER INPUT / MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red Input / Output
Ground (Horiz.sync.)
Green Input / Output
-----
Blue Input / Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
5V / -----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC data /...