Sanyo Plc Xl50a Projector User Manual

Multimedia  Projector 
MODEL PLC-XL50A
Owner’s Manual 

2
Features and Design
◆ Large Screen in Limited Space
Short  focus  lens  allows  you  to  project  large  images  
from  short  distance  (p.14).    Images  can  be  projected 
on the floor.
 
◆ Security Function
The Security function helps you to ensure security of 
the projector. With the Key lock function, you can lock 
the operation on the top control or remote control 
(p.51). PIN code lock functions prevents unauthorized 
use of the projector (pp.20, 52–53).
◆Logo Function
The  Logo  function...

3
Table of Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its 
respective corporation.
Features and Design  . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents   . . . . . . . . . . . . . . . . . . . . . . . . . . 3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . 5
Air Circulation  6
Moving the...

4
To the Owner
CAUTION:TO  REDUCE THE  RISK  OF  ELECTRIC S H O C K ,  D O   N OT   R E M OV E   C OV E R 
(OR  BACK).  NO  USER-SERVICEABLE 
PA R T S   I N S I D E   E X C E P T   L A M P 
REPLACEMENT.  REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS 
VO LTAG E   C O N S T I T U T I N G   A   R I S K   O F 
ELECTRIC  SHOCK  IS  PRESENT  WITHIN THIS 
UNIT.
T H I S   SY M B O L   I N D I C AT E S   T H AT   T H E R E 
A R E   I M P O R T A N T   O P E R A T I N G   A...

5
Safety Instructions
All the safety and operating instructions should be read before 
the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them  for 
later  use.  Unplug  this  projector  from  AC  power  supply  before 
cleaning.  Do  not  use  liquid  or  aerosol  cleaners.  Use  a  damp 
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, 
or  when  it  is  left  unattended...

6
Safety InstructionsMoving the Projector
When the projector is not in use for an extended period, 
put it into a suitable case.
Handle  the  projector  carefully;  do  not  drop,  bump, 
subject  it  to  strong  forces,  or  put  other  things  on  the 
cabinet. 
Openings  in  the  cabinet  are  provided  for  ventilation. To 
ensure reliable operation of the product and to protect it 
from  overheating,  these  openings  must  not  be  blocked 
or covered.
Air Circulation
Exhaust Vent
(Hot air...

7
Do  not  roll  the  projector  more 
than  10  degrees  from  side  to 
side. 
Do  not  put  the  projector  on 
either side C or E to project an 
image. 
Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard.
Installing the Projector in Proper Position
1010
µ » ï Å 	 

8
Compliance
AC Power Cord for the United Kingdom:
This  cord  is  already  fitted  with  a  moulded  plug  incorporating  a  fuse,  the  value  of  which  is  indicated  on  the  pin  face  of  the  plug. 
Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus A S A. If the fuse 
cover  is  detachable,  never  use  the  plug  with  the  cover  omitted.  If  a  replacement  fuse  cover  is  required,  ensure  it  is  of  the  same 
colour as that...

9
7.75 (196.8)
7.91 (201) 4.50 (114.3)
Lens center 4.29 (109)
8.58 (218)
14.72 (374)
1.0°
1.0°
0.17 (4.2)
19.49 (495)
16.59 (421.5)
0.41 (10.5)
0.33 (8.5)
9.37 (238)


10
Part Names and FunctionsRear Terminal
qwert
yiu
t S-VIDEO INConnect the S-VIDEO output from video 
equipment to this jack (p.17).
q AUDIO INConnect  the  audio  output  from  video  equipment 
connected  to w , t  or  y  to  this  jack.  [When  the 
audio  output  is  monaural,  connect  it  to  L  (MONO) 
jack (p.17-18).
e AUDIO IN COMPUTER Connect the audio output (stereo) from a computer  
connected to u or i to this jack (pp.16, 18).
w VIDEO INConnect the composite video output from video...