Sanyo Plc Xf60a Projector User Manual

41
Computer Adjustment
Press the MENU button to display On-Screen Menu. Spin
Menu icons with the Point buttons (7and 8) or the Control
pad and press the SELECT button when the PC ADJ. icon
comes right in front.1
2
Move the yellow
frame pointer to an
item and press the
SELECT button.
PC Adjust Menu
Adjust value with the Point
buttons (eand d) or
the 
Control pad.
Some computers employ special signal formats which may not be
tuned by Multi-scan system of this projector. Manual PC
Adjustment enables you to...

42
Adjust this item when the projected image is affected by the
noise from the external equipment. (From 0 to 15)  V-sync phase
Reset
Mode
Exits the PC Adjust Menu.
Quit
Resets all adjustments to their previous levels.
Vacant Mode
shows the selected input,
source and system, and  values
of “Fine sync,” “Total dots,”
“Clamp,” “Display area,” and
“Position.”
To store adjustment data
To clear adjustment data
Press the SELECT button
at the Display area and the
Display area dialog box
appears.
✔Note:
Fine...

43
Image Adjustment
Image Menu (PC)
Move the  yellow
frame pointer to
an image level you
want to select and
then press the
SELECT button.
1
Normal picture level preset on this projector for AV mode. Standard 
Picture level with improved halftone for graphics.
Real
Normal picture level preset on this projector for PC mode.
Standard 
Picture level adjusted for picture with fine tone.
Cinema
User preset picture adjustment in IMAGE ADJ. menu (p.44~ 46).
IMAGE 1~10
2
selects image level from Standard, Cinema,...

1
2
Decrease or increase contrast with the Point buttons (eand d)
or the Control pad. (From 0 to 63.)
Adjust image darker or brighter with the Point buttons (eand d)
or the Control pad. (From 0 to 63.) Contrast
Brightness
Lighten or deeper color with the Point buttons (eand d)or the
Control pad. (From 0 to 63.)
Adjust with the Point buttons (eand d)or the Control pad to
obtain proper color. (From 0 to 63.) Color
Tint
Image Adjust 
Image Adjust Menu
Color management
The Color management function enables...

45
Image Adjustment
Image Adjustment
Move the pointer to one of the followings with the Point
buttons (e, d, 7,and 8) or the Control pad and press the
SELECT button.
LIST.............displays Color Management List window to store
the adjustment data.
COLOR.M..returns to the previous image with the Color
management pointer.
MENU.........displays a confirmation dialog box. Select [Yes] to
return to the menu display.
Color management list
After selecting LIST on the Color selection window, Color
Management...

Reset all adjustments to their previous figures.
Exits Image Adjust menu.
To store the adjustment data, move an yellow frame pointer to
Store and press the SELECT button. Image Level Menu will
appear. Move the yellow frame pointer to one of Image 1~10
and then press the SELECT button. 
With this function “On”, interlaced video signal is displayed in a
progressive picture. Progressive 
This function is effective on 2:3 or 2:2 pulldown video sources.
With this function “On,” the projector reproduces...

47
Screen Setting
Provides image to fit the horizontal size of the screen size.
When the input signal is SXGA (5:4), the image is fully displayed
at 4:3 aspect ratio. Full screen
Adjusts aspect (scale and position) of the screen. Press the
SELECT button at Custom. Custom will be displayed on the top
left of the screen for four (4) seconds and then return to the
previous menu display. Press the SELECT button again with the
pointer stayed on Custom to display Aspect setting menu. Adjust
each value of Scale...

48
Press the SELECT button at the D. Zoom –. The message “D.
Zoom –” is displayed. Press the SELECT button to compress the
image size.  D. Zoom –
Ceiling 
Rear 
When this function is “On,” the picture is top/bottom and left/right
reversed. This function is used to project the image from a ceiling
mounting the  projector.
When this function is “On,” the picture is left/right reversed. This
function is used to project the image to a rear projection screen.
Press the SELECT button at the D. Zoom +.  The...

49
Menu
1
2
Setting
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
This feature allows you to change the On-Screen Menu setting.
Position
When Position is selected, arrows appear in upward, downward,
right and left directions on the screen.  Move the menu position
with the Point buttons (e, d, 7,and 8) or the Control pad and
fix it by pressing the SELECT button.
My menu
This...

50
Setting
Logo
Logo settings can be altered as follows:
Logo select
This function decides what to be displayed on the starting-up
display as follows:
Default  . . . .the factory-set logo
My logo  . . .the image you captured  
Off  . . . . . . .count-down only 
Capture
This function enables you to capture the image being projected
and use it for a starting-up display or interval of presentations.  
After capturing the projected image, go to the Logo function and
set it to “My logo.” Then the captured...