Sanyo Pdg Dsu30 Projector User Manual

							40
English
Appendices
Specifications
Projection SystemSingle Chip DLP® Technology by Texas Instruments
Number of PixelsSVGA: 800 pixels(H) × 600 lines(V), up to UXGA (1600 X 1200) with scaling technology
Lamp180W (160W on ECO mode)
Projection LensF#2.41~2.55  f=21.8~24 mm with 1.1× manual zoom lens
Projection Screen Size (Diag.)27.46 to 302.80 inches (0.7 to 7.7 meters) Diagonal
Projection Distance3.94 to 39.36 feet (1.2 to 12.0 meters)
Video Compatibility-  NTSC-M/NTSC-4.43/PAL-B, D, G, H, I/PAL-M/PAL-N/SECAM-  Component: SDTV(480i/576i), EDTV(480p, 576p), HDTV(720p, 1080i/p)
H. Frequency31.35kHz~91.1kHz horizontal scan
V. Frequency56Hz~85Hz vertical refresh
Power SupplyUniversal AC input 100-240V ; Input Frequency 50-60Hz
Power ConsumptionNormal mode: 255W
Standby mode 
						

							English
41
English
Appendices
Computer Compatibility
ModesResolutionV.Frequency(Hz) H.Frequency(kHz) 
VGA640 x 3508537.90
640 x 4008537.90
640 x 4806031.50
640 x 4807237.90
640 x 4807537.50
640 x 4808543.30
720 x 4007031.50
720 x 4008537.90
SVGA800 x 6005635.20
800 x 6006037.90
800 x 6007248.10
800 x 6007546.90
800 x 6008553.70
XGA*1024 x 7686048.40
*1024 x 7687056.50
*1024 x 7687560.00
*1024 x 7688568.70
WXGA*1280 x 7686047.40
*1280 x 7687560.30
*1280 x 7206045.00
*1280 x 8006049.30
SXGA*1152 x 8646053.80
*1152 x 8647063.80
*1152 x 8647567.50
*1152 x 8648577.10
*1280 x 10246063.98
*1280 x 10247579.98
*1280 x 10248591.10
*1280 x 9606060.00
SXGA+*1400 x 10506065.31
UXGA*1600 x 12006075.00
MAC LC 13”640 x 48066.6635.00
MAC 16”*832 x 62474.5549.10
MAC 19”*1024 x 7687560.24
MAC*1152 x 87075.0668.68
MAC G4640 x 48066.61934.98
i Mac DV*1024 x 7687560.20
i Mac DV*1152 x 8707568.68
i Mac DV*1280 x 9607575
Note: “*” compressed computer image.
Note
Note: The projector only support a separate sync signal. Composite sync and sync on green are not supported.
Note 
						

							42
English
Appendices
Configurations of Terminals
1TXD
2RXD
3GND
Terminal : Analog RGB (Mini D-sub 15 pin)
1Red (R/Cr) Input/R Output95V / ***
2Green (G/Y) Input/G Output10Ground (Ver. sync.)
3Blue (B/Cb) Input/B Output11ICP download
4***12DDC data / ***
5Ground (Horiz.sync.)13Horiz.  sync.  Input  /  Output  (Composite  H/V sync. Input)6Ground (Red)
7Ground (Green)14Vert. sync. Input / Output
8Ground (Blue)15DDC clock / ***
31
2
Terminal : Mini DIN 3-pin
5 4321
10 98 76
15 141312 11 
						

							English
43
English
Appendices
Declaration of Conformity
Model number: PDG-DSU30
Trade name: SANYO
Responsible party: SANYO North America Corporation
Address: 21605 Plummer Street Chatsworth, California 91311
Telephone: (818) 998-7322
Regulation & Safety Notices
This appendix lists the general notices of your Projector. 
FCC notice 
This device has been tested and found to comply with the limits 
for a Class B digital device pursuant to Part 15 of the FCC rules. 
These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
device generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur 
in a particular installation. If this device does cause harmful 
interference to radio or television reception, which can be deter-
mined by turning the device off and on, the user is encouraged 
to try to correct the interference by one or more of the following 
measures: 
▀■  Reorient or relocate the receiving antenna. 
▀■  Increase the separation between the device and receiv-
er. 
▀■  Connect the device into an outlet on a circuit different 
from that to which the receiver is connected. 
▀■  Consult the dealer or an experienced radio/television 
technician for help.
Tested To Comply with FCC standards FOR HOME 
OR OFFICE USE 
						

							44
English
Appendices
Operation conditions 
This device complies with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions:
1.  This device may not cause harmful interference and
2.  This device must accept any interference received, in-
cluding interference that may cause undesired operation. 
Notice: Canadian users 
This Class B digital apparatus complies with Canadian 
ICES-003. 
Remarque à l’intention des utilisateurs cana-
diens 
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. 
Declaration of Conformity for EU countries 
▀■  EMC Directive 2004/108/EC (including amendments) 
▀■  Low Voltage Directive 2006/95/EC
Notice: Shielded cables 
All connections to other computing devices must be 
made using shielded cables to maintain compliance with 
FCC regulations. 
Caution 
Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this projector. 
Warning: this product contains a chemical known to the state of California to cause cancer, birth defects or other reproductive harm. 
						

							English
45
English
Appendices
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countr\
ies and 
do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and compo-
nents which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accu-
mulators, at their end-of-life, should be disposed of separately from your household 
waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical symbol 
means that the battery or accumulator contains a heavy metal at a certai\
n concentra-
tion. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead 
In the European Union there are separate collection systems for used ele\
ctrical and 
electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your local community waste collec-
tion/recycling centre.
Please, help us to conserve the environment we live in!
Manufacturer and Address:
SANYO Electric Co.,Ltd.
5-5, Keihan-hondori, 2-chome, Moriguchi City, Osaka, Japan
Authorized Representative and Address:
SANYO Sales & Marketing Europe GmbH
Stahlgruberring 4, D-81829 Munich, Germany
NOTES ON Lithium Battery (CALIFORNIA USA ONLY)This product uses a Lithium Battery which contains Perchlorate Material - special 
handling may apply. 
See www.dtsc.ca.gov/hazardouswaste/perchlorate 
						

							46
English
Appendices
Operation
1. Connect the specified RS-232C control cable to SERVICE PORT on 
the projector and serial port on the PC.
2. Launch a communication software provided with PC and setup the 
communication condition as follows:
3. Type the command for controlling the projector and then enter the 
“Enter” key.
 Example
 When you want to change the input to Computer, Type ‘C’ ‘0’ ‘5’ 
‘Enter’.
Serial Control Interface
  This projector provides a function to control and monitor the 
projector’s operations by using the RS-232C serial port.
Baud rate  : 9600 bpsParity check:  : noneStop bit : 1Flow control : none Data bit : 8
•  The default of the baud rate is set to 9600 bps. If an error occurs in the com-munication, change the serial port.
•  Enter with ASCII 64-byte capital characters and one-byte characters.
Note
ORDER RS-232C CONTROL CABLERS-232C control cable can be ordered through your dealer. When order-ing, give the following information to the dealer.
■ Model No. of your projector : PDG-DSU30
■ RS-232C control cable : Service parts No. CH4200272G002 
						

							English
47
English
Appendices
CommandFunctionCommandFunction
C00POWER ONC30D.zoom +
C01POWER OFF (Immediate POWER OFF)
C31D.zoom -
C3APOINTER RIGHT
C05ComputerC3BPOINTER LEFT
C09Volume +C3CPOINTER UP
C0AVolume -C3DPOINTER DOWN
C0BSOUND MUTE ONC33VIDEO
C0CSOUND MUTE OFFC34S-VIDEO
C0DAV MUTE ONC43FREEZE ON
C0EAV MUTE OFFC44FREEZE OFF
C0FAspect 4:3C89AUTO ADJ.
C10Aspect 16:9-IC8EKEYSTONE +
C11Image mode PresentationC8FKEYSTONE -
C12Image mode Movie
C13Image mode sRGB
C14Image mode Bright
C15Image mode User 1
C16Image mode User 2
C17Image mode Classroom
C18Image mode Blackboard
Functional Execution Command
Format
The command is sent from PC to the projector with the format below; 
‘C’ [Command] ‘CR’ 
Command: two characters (refer to the command table below.
■  The projector decodes the command and returns the ‘ACK’ with 
the format below;
‘ACK’ ‘CR’
■  When the projector cannot decode the command, it returns with 
format below.
‘?’ ‘CR’ projector and serial port on the PC. 
						

							48
English
Appendices
Status Read Command
Format
The command is sent from PC to the projector with the format below;
‘CR’ [Command] ‘CR’ 
Command: one character (refer to the command table below.
■  The projector decodes the command and returns the ‘Character 
string’ with the format below;
CommandFunctionProjectorReturnProjector status
CR0Status Read00Power ON
80Standby mode
CR1Input Mode Read 
CR3Lamp Time Read 
CR4Setting Read 
The tables on pages 46~48 show the typical command lists for con-trolling the projector. Please consult your local dealer for further information of other commands.
Note 
						

							English
49
English
Appendices
Dimensions
3.24/82.30mm
Lens Center
2.48/63.00mm
Screw Holes for Ceiling Mount
Screw: M3
Depth: 0.30~0.39/7.5~10.0mm
11.27/286.31mm
7.56/192.00mm
3.96/100.60mm
1.67/42.39mm
1.75/44.39mm
3.47/88.15mm
3.06/77.75mm
2.17/55.00mm4.33/110.00mm
4.67/118.65mm 6.60/167.66mm
Lens Center
4.94/125.53mm
2.28/57.79mm3.03/77.00mm
0.41/10.54mm
3.7° Max.